The display on my tc3500 bowflex tread climber stopped working

https://www.bowflex.com/video/treadclimber-belt-lubrication.html

If you wiah to get some details about treadmill error codes and solutions then check the following link
http://electro-medical.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Bowflex Treadclimber Shuts down - Questions - Fixya

www.fixya.com > Forum > Treadmills > Bowflex > Bowflex Treadclimber

Bowflex Treadclimber, shuts down related issues. ... After a few times of shutting down due to the heat. Ad ... It shuts down about 60 seconds after it starts.

Customer Reviews: Bowflex TC3000 Treadclimber

www.amazon.com/Bowflex...Treadclimber/.../B000B...

Amazon.com, Inc.The second time I used it I slowed down the speed and worked on getting the ... After researching the TreadClimber for over a year (the cost was a big factor .... We were never able to make the treadles go up and down more that a few inches. ..... a great workout However it continually shut offs while working out and Bowflex ...

Comments for Bowflex TreadClimber Problems

www.treadmilltalk.com/bowflex-treadclimber-user-comments-comments....

Oct 30, 2013 - NOTE: My comment about Bowflex Treadclimbers is also one I left in another area. ... seems like no one sprung the extra few bucks to pay for someone to put the ... In my case , after the initial startup, the machine stops EVERY time at ...nearly spine snapping shutdown at exactly 32 minutes after starting. 5.

[PDF]Bowflex® TreadClimber® 1000, 3000 & 5000 - Nautilus

download.dfxi.com/.../SM/Bowflex/BFX_TC135_SM_RevA_web.pdf

I would be contacting bow flex customer service. That product hasn't been out that long

If you're running the machine on a dedicated circuit then your unit is drawing too much current. This can be caused by friction and drag. Solution: Lube deck/belt. If problem persists, replace deck/belt. If you ignore this fix this will blow your controller. .

Nice machine! I use WD 40 on my machine. It comes with a small tube attached to the can that lets you get into joints and bearings easily. Keep the can handy if you work out regularly..it keeps it quiet and smooth!

see the video and proceed according and fix it. God bless you