Putting Yourself in the Picture
The Self Timer creates a 10-second delay between the time you press the
Shutter button and the time the picture is taken.
1 Place the camera on a flat surface or use a
2 In any Still mode, press the Self Timer
The Self Timer icon appears in the
3 Compose the scene. Then press the Shutter
button half-way and hold to set the
exposure and focus, then press the rest of
the way down. Move so that you are in the
The Self Timer light blinks slowly for 8
seconds (then quickly for 2 seconds)
before the picture is taken. The camera
"clicks" when the picture is captured. To
turn off the shutter sound, see page 64.
The Self Timer turns off after you take the
picture or if you change modes.
To cancel the Self Timer before the picture
is taken, press the Self Timer button. (The
Self Timer setting remains active.)
To turn off the Self Timer, press the Self
Timer button twice.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did you know there are two firmware updates available for your camera?
For a timer picture, here are the instructions:
1Press the <o> button. ( 9) 2Select either <j> or <l>.
Look at the LCD panel and turn the
<5> dial to select <j> or <l>. j:10-sec. self-timer l:2-sec. self-timerN 3Take the picture.
Focus the subject and press the
shutter button completely.
The picture will be taken after the
self-timer delay elapses.
You can check the self-timer
operation with the self-timer lamp,
beeper, and countdown display (in
seconds) on the LCD panel.
Two seconds before the picture is
taken, the self-timer lamp will stay on
and the beeper will sound faster.
Do not stand in front of the camera when you press the shutter button to
start the self-timer. Doing so will throw off the focus.
When you are viewing the pictures in your digital camera there should be an icon of a trash can to delete the picture-
Also if you have a sd card reader for your computer you could just put it in there and highlight the pictures you want to delete and press the delete button on your keyboard.
This is because camera will show these pictures with specific file name/ number.
You need to check camera taken picture file name/ number and change uploaded file name/ numbers as camera firmware generate it.
Please change picture file name according to camera taken picture.
let me know if further help required.
Hi, Near LCD screen you will see control Knobs as shown in below picture, find Timer switch on control knobs and press it once, then press shutter button, camera will start beep and take photo after 5 seconds.
This function lets you take pictures using the self-timer. Fix the camera securely on a tripod for self-timer shooting. This function is useful for taking pictures when you want to be included in the photograph.
1 Select [ON], and press Z. 2 Press the shutter button fully to take the picture. • Pressing the shutter button halfway locks the focus and exposure. • The self-timer lamp lights for approximately 10 seconds, then starts blinking. After blinking for approximately 2 seconds, the picture is taken. • To stop shooting while in n mode, press the shutter button fully again. • To cancel the self-timer, press Z. • The self-timer mode is automatically canceled after one shot.
Note: • If sequential shooting is attempted in self-timer mode, the camera shoots 5 frames at most regardless of the setting.
Hope my info fixes your problem, Thanx for using fixya, cheers.
Hi , to set camera in self timer , did you see thew swevil knob on right on front thats the self timer knob , recock the film to load new shoot slide down self timer , aim to the object or tri pod stand then push the shutter you can hear gear running in few sconds the shutter cutain will open for take picture automatically , you must run and hurry to make pose within the few second , thats all good luck.
Hi,if dont have any very important picture stored in camera you may reformat it all protect picture will erase , the camera sim has no more vacant its full you connot store picture anymore best solution is to reformat it.press menu , press setup,navigate down select format. then okey.