Question about Epson Aculaser C1100 Printer

2 Answers

Printing Problem When I print documents, the print is darker on the left of the page then it gradualy starts to fade on the right. I have changed the toner and followed the cleaning procedure but it makes no differance,any ideas would be most welcome, Thanks

Posted by on

  • John Manser Jun 05, 2007

    Ed, Already replaced photoconducter unit, thanks

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 77 Answers

If you have have followed the directions for cleaning the printhead (blue lever on right side of printer - move wand in and out completely several times) then it sounds as if your drum unit (photoconductor unit) has developed a problem and should be replaced. PLEASE let me know if this solved your problem or you need additional assistance before rating this solution. Thanks Ed

Posted on Jun 05, 2007

  • Edward Paulinski Jun 09, 2007

    You provided a rating BEFORE providing additional information.

    Sorry I can be of further assistance.

    Ed

×

Ad

I had the same issue, although only minor on the right hand margin, cleaned the printhead as per instructions and it worked! thank!

Posted on Aug 13, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix text from printing unevenly as if the roller was not rolling consistently?


Sorry, I don't have one. Mine was a different problem; incompatibility between my old hp desk jet 5650 and my new Mac Book Pro. Just needed a newer printer!
When something like what you describe happens it is because the cartridge is dry; I change the cartridge.

Jun 13, 2014 | HP DeskJet 5650 InkJet Printer

1 Answer

It prints only half a page.... how can i fix that???


Does the print fade out or is the printed page complete, just cropped down? If it is fading out then it is the cartridges running dry, or refilled using the incorrect ink. If it is printing the entire document, just smaller, then under printer properties you can set the page size. (control panel - printers and faxes - right click your printer and select printing preferences) I hope this helps Regards GM

Apr 13, 2011 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

When printing reports off, all the document does not print to the right of the page. whats the answer to fixing this


Hi

Does print is faded or it prints clear? If faded, just get your cartridge and shake it well to distribute evenly the toner. If prints clear, preview it first before printing and maybe the other print area you want is not included when printing. Just set the print area.

Jan 11, 2011 | HP Laser Jet 1320 Printer

2 Answers

Sir ihave printing problem when i print a page on the left side margin impression faded there is some faded portion of teflon roller crieate this problem please assist me how to solve this problem ...


sir ihave printing problem when i print a page on the left & right side margin impression faded please assist me how to solve this problem regards KULDEEP SINGH BISHT

Aug 09, 2010 | HP LaserJet 1020 Printer

1 Answer

The right side of the printable portion of each doc prints light


You just need to remove the toner and reach in with a dry rag and wipe the little inch wide window that is above where the toner goes. This window gets covered with toner dust and makes prints lighter...It runs all the way from right to left above the toner and drum.

Nov 03, 2009 | HP LaserJet 4100tn Printer

1 Answer

Print fades out from right side of page


Hello,

Check out this website it will assist you with all the known printing problems out there,

This could be anything from a transfer roller to a defective ink cartridge. However the above link is for troubleshooting print quality problems with your printer

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=239135&prodTypeId=18972&prodSeriesId=239135&objectID=bpl12234


May 27, 2009 | HP LaserJet 1500L Printer

1 Answer

I HAVE A HP DESKJET 940C PRINTER. BLACK PRINTING PROBLEMS.


I GOT A CLARIFICATION REQUEST AND I SENT FURTHER INFORMATION BUT AS OF YET I HAVE NOT RECIEVED ANY FURTHER INFORMATION BACK FROM "KEEPITSIMPLE".

Jan 27, 2009 | HP DeskJet 940c InkJet Printer

1 Answer

Fading cartridge problems


That printer is pretty old. Are you selecting "Best" quality when you print or is it possible that some documents are being printed in Quick Print mode (which puts less ink on the page)? If you're doing the same thing on each print job but the print quality changes, there's definitely a problem. If you're printing from web pages, the print quality may be a factor of the design of the pages. If you print two pages of a multi-page document and quality declines, you should be able to get help through Lexmark's technical support.

Apr 09, 2008 | Lexmark P6350 All-In-One InkJet Printer

1 Answer

Printing okay on left side but gets darker and blurrier towards right side of lines


Remove the toner cartridge and drum assembly together. Gently rock the assembly from end to end, as when installing a new toner cartridge. Then put the assembly back in place. This procedure worked for me. I'm guessing that I must have laid the toner and/or drum on its side, or perhaps upside down, when I was replacing the drum, and this was responsible for the problem.

Mar 24, 2008 | OKI C5100n Laser Printer

2 Answers

PHOTO APPEARANCE


Check your printer settings, If your printer is set on draft mode the prints may appear faded washed out, turn up the quality of the printing and this should solve the problem.

Feb 25, 2008 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Epson Aculaser C1100 Printer Logo

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18426 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...