The drum temperature is incorrect as sensed by the drum
thermistor. Ensure that there is adequate clearance for airflow (at
least 4 inches (10 cms.) on all sides) and that the room
temperature is within specification
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That is a drum heater fault code. The drum heaters are 2 ,,, 150 watt halogen lamps. One or both have burnt out.
You can verify this by shutting the machine off, then turning it back on and look into the fan opening at the right side of the machine. See if you see a glow inside the machine. I doubt you will. if not you will need to replace the lamps. Let me know if you want me to send you info how to change them.
I think I had this error once. Could be your bulbs (one or both) are out or are on their way out. I had to replace mine. They are 150 watt halogen bulbs. When you open it up, do you see lights on the side peering in?
There are 2 , 150 watt halogen lamps in the drum heater assembly. One or both are burned out. I can send you instructions on how to replace them. Xerox will want over $250 for an entire heater assembly. You can buy the lamps at Lowes or any place that sells Halogen lamps for around $15 for a set.
PM_FAULT_DM_CAM_ POSITION_ERROR The Drum Maintenance home sensor actuated, but not at the expected time. Inspect the maintenance drawer lift pins for wear. Run diagnostics to verify clutch and sensor operation. Also verify that the drum maintenance shaft is properly assembled.
If you need the SM, let me know and I'll shoot it out to you. Thanks and please take a moment to rate as fixya.
Does it diaplay a fault code? It may take 20-30 minutes to display. I suspect if you leave it on long enough it will come up with a 15,004.xxx code.
I suspect you have bad drum heaters, but please leave it on for an extended period of time and see what fault code comes up.
That is something to do with the drum maintenance system.
1 of 2 thinhgs is most likely. Remove the maintenance tray and look at the tabs the stick out from it. About 1 inch long or less and 1/4 inch high or so. Those will wear and have sort of a step shape to them. That can be the problem itself, but more likely, the maintenance kit clutch is bad and slipping. The timing of the maintenance kit movement is off. Here is that clutch part number
401-0871-00. You can call 1-800-835-6100 and order it from Xerox, or look on google for it. I have found better prices searching, although its not real expansive. It is on the left frame, looking at the front.
You remove the left cover, the clutch is lower on the frame on the front 1/3 of the machine. Really easy to replace and I would say more than an 80 percent chance that cluch will resolve your problem.