Question about Lucent PARTNER18 Corded Phone

1 Answer

Stop ringing at certian phones when outside calls come in.

All our phones ring when an outside calls comes in. How do I disable ringing at certain phones when this happens? (Only for outside calls not internal)

We have the Lucent Partner Mail VS System.

Thank you.

Posted by on

  • charter730 Jan 13, 2009

    Thank you very much for your help. Your instructions were precise and presented in a professional manner. Also your response time to my inquiry was surprisingly fast. I will pass on your website information to others to use.



    Thank You.







  • Anonymous Mar 20, 2014

    How can I change who receives incoming calls so half of the building doesn't ring at the same time.

×

1 Answer

Http://dstech1.com/programming-line-ringing/


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist's extension to Immediate Ring and the lines at the users' extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users' extensions -with the receptionist providing backup -set the line at the users' extensions to Immediate Ring. Then set the line (or lines) at the receptionist's extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist's extension.
Programming
To change the way outside lines or pools ring at an extension:

  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to disable do not disturb on NEC Dterm80 phone?


Have a coworker call your extension to see if DND is on, they will go straight to voicemail or get a fast busy. Speaker 42 may be the default cancel DND code, depending on your system and whether the codes were changed. Anyway, ringing is set up in system programming. If someone calls your extension it will likely ring, but outside calls have to be assigned to ring in system programming. Usually need a tech to do the programming since it gets complicated very quickly.

Sep 09, 2014 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

I can not locate how to limit the number of rings; and the answering machine does not come on even after 20 rings; I can hear my message recording- when I play it back; but it does not come on for incoming...


Ring count You can change the number of times the phone rings before the unit answers calls. The default setting is "4 rings". "Toll saver": The unit answers on the 2nd ring when new messages have been recorded, and on the 4th ring when there are no new messages. If you call your phone from outside to listen to new messages, you will know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call.
1 {MENU} 2 {V}/{^}: "Answering device" i {OK} 3 {V}/{^}: "Settings" i {OK} 4 {V}/{^}: "Ring count" i {OK} 5 {V}/{^}: Select the desired setting. 6 {OK} i {OFF}
MANUAL http://service.us.panasonic.com/OPERMANPDF/KXTG1032.pdf
HOPE IT HELPS GILES102

Jun 27, 2011 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Hi i have a panasonic KX-TES824 installed with 2 co lines and 4 extensions. I want the ringtones to be different for internal telephones (ie call between the extensions) and the CO Lines (when call comes...


A Panasonic Analog PTS ring sound is not adjustable, however, the cadence is. An outside call rings with a single ring, an internal call is either voice announce or a double ring. The digital phones from Panasonic have either 8 or 30 different tones, but that's a different system.

Carl

Nov 21, 2010 | Panasonic KX-T7730 Corded Phone

1 Answer

I have a Panasonic KX-T7731 business phone system and I am trying to do the following" Program specific phones to be alerted with a tone for phone-to-phone intercom calls but to NOT be alerted when the...


In a TA series, the doorphone ringing is controlled by system programming in 700-702.

If you have a different system model, try the manual under Doorphone Ringing.

Carl

Sep 18, 2009 | Panasonic KX-T7731 Corded Phone

1 Answer

How do I get edge 120 to ring when outside calls come i? Several of our phones do, but a couple of them don't. Can't find anything in the manual about setting a phone to be one of the phones that ring...


you need to goto the mobile settings and scroll to ringtones and select the ringing tone,volume and whether you want continuos ringing or not is there for you to choose.

Jul 16, 2009 | Lands Phones

2 Answers

Using the T7316E in an onair studio want to have external mute


You can use Do Not Disturb feature
Feature 85 - On
Feature #85 - Off
Cheers

Jun 17, 2009 | NorStar T7316E Corded Phone

1 Answer

Stop ringing at main phones when outside calls come in.


Here is a link to program line ringing.

It sounds like your extension is forwarded (confirmed by the one beep you hear on an incoming call.

From any display phone, press Feature 11
then enter your extension number 2 times. So if you are extension 20, do this:
Feature11-20-20
see if that does it.

May 28, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

I CANNOT MAKE MY PHONE HAVE RINGER VOLUME WHEN I RECEIVE A CALL


Did it EVER ring on outside calls? It may NOT be programmed to ring

Apr 15, 2008 | Panasonic KX-T7630 Corded Phone

Not finding what you are looking for?
Lucent PARTNER18 Corded Phone Logo

2,313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lucent Lands Phones Experts

george  peters
george peters

Level 3 Expert

858 Answers

tfelton3

Level 2 Expert

183 Answers

pbxinc

Level 2 Expert

61 Answers

Are you a Lucent Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...