Question about Behringer Rx 1202fx 12 Channel Line and Microphone Mixer

1 Answer

AC POWER PACK BLOWN

I am deperately looking for a replacement ac powere adapter for a Behringer eurorack ub1202 mixer. AC power pack blew ages ago and now I just cant find one anywhere, Hope you can help,

MR RUDGE

Posted by on

  • davidrudge20 Jan 10, 2009

    Thank you my friend. Its a product I brought years ago but after 2 years it packed up, shame really great when it worked as you said. HERE COMES THE BIN for my little mixer. Never mind,



    Thank you for your help.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 58 Answers

David,   I dont like to be the bearer of bad news, but Behringer dissolved its service/repair center years ago.  In my opinion, this indicates little faith in the profitability of servicing Behringer products.  If the manufacturer wont even repair their own products, I wouldn't buy or use that brand if I had a choice.  Their products are good, WHEN THEY WORK.  They keep their prices low by using inexpensive, disposable quality components.  Most of their products aren't worth repairing.      Here are a few options to find your power supply.  Try Rogue music in New York, NY.  Here is the web address.
www.roguemusic.com

Here is another resource.  DBM pro Audio is an authorized Behringer Repair Center.  They are also in New York.  They will be able to tell you if your part is available from Behringer.  I'm very sorry to inform you of the inferiority of Behringer products.  I think the truth, though it hurts sometimes, is the best teacher.  P.S. if you ever visit DBM... next to the elevator, outside DBM's office is a one yard dumpster, it is always brimming with the carcasses of unrepairable Behringer mixing consoles.      Remember, when buying electronics, you get what you pay for...cheap price = cheap components (and usually headaches down the line) Good luck!  I wish you success on finding your power supply.  Michael Mittelsdorf
www.dbmproaudio.com

See my profile for my qualifications. DBM does all my electronics repair.

Posted on Jan 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find a schematic ?


Try http://elektrotanya.com 2 downloads per day for free, else pass the electronics test to create a login & get more :-) Good Luck!

Jul 31, 2014 | Behringer UB1202 Eurorack UB1202 Mixer (12...

1 Answer

Behringer dsp2024p power adapter burnt...i need the details of the power adapter


It uses a regular AC power cord like on a PC.Here is a link to the manual and on page 10 show a power cord socket of 120v Ac just like on an amp or PC.

http://www.behringer.com/assets/DSP2024P_P0147_M_EN.pdf

Mar 11, 2013 | Music

1 Answer

How to connect UB1202 to an Amplifier


Hi ha07. Have you fixed your Problem? If not, If you are using a HiFi amp you can connect it to any AUX input or tape in.
But better to use Aux, so you can keep Tape-In free, but it all depends how you want to use your system for recording
From the Mains "OUT" of your Mixer, 1/4 inch to RCA lead/s or adaptors will be needed, (Depending on your AMP) into the aux input of your stereo. But their is many scenarios for inputs and outs.
then you can run a lead to your computer from your Mixer or amp from Tape out, but again lots of possibilities.
Hope this helps if you haven't fixed your problem
ed62d84c-af24-4d7b-92a8-035de0323ccc.jpg
Dont use (Phono input)
RustyRecords
Good luck and Vinyl Rocks RustyRecords Mail

Jun 29, 2012 | Behringer UB1202 Eurorack UB1202 Mixer (12...

1 Answer

I'm looking for a solution how can i connect my


You can use the compressor in two ways. 1st you can go inline from the main outputs into the compressor out of the compressor to the rest of the world using normal cables. You may also insert the compressor into the main inserts using a cable that is tip, ring, sleeve 1/4", to seperate 1/4" tip sleeve mono plugs. any more questions give us a call at the store 215-736-8055

Jun 10, 2011 | Behringer EURORACK UB2442FX PRO Mixer

1 Answer

Hi all i own a behringer XENYX 802 audio mixer. this device is powered by a power supply that as input to the mixer gives 18,5 x2 Ac, 150ma. i would like to know in which point of the circuit i can...


You would need TWO DC supplies as they use AC so they can create both a plus and minus 15 volt power source to run the internal op amps.

Here is a schematic for the 1202 which has same power supply configuration as the 802.

http://elektrotanya.com/behringer_xenyx_1202.pdf/download.html

Scroll down to the little link "Get Manual" and download the service manual and schematic. You will find the power input in the upper left corner of page 5.

Mar 29, 2011 | Behringer Xenyx 802 8-input 2-bus Mixer W/...

1 Answer

LEVEL POT ON A BEHRINGER EURORACK MX 602A-BAD


It appears that both these use a 50K pot in the identical circuit and it is UNLIKELY they re-engineered very much so it is likely they use the same pot.

Behringer parts service should be able to tell you.

Apr 28, 2010 | Behringer DJx700 5-Channel Pro DJ Mixer...

2 Answers

Need Behringer Eurorack mixer power supply connector


Those were used for mic connectors at one time,,, they are related to the Amp 91-MC3F family of connectors and those are out of production and they are demanding $20 to $50 for one connector.

That is a ridiculous price and I would be tempted to swap out the connector for a more available design.

On eBay item 250401122616 is one but they want $13 pus $11 shipping which is a rip off.

These were used on some OLD CD radio mics.

Dec 15, 2009 | Behringer Music

2 Answers

Power supply cooked


There isn't anything in the power supply you cannot rebuild except the transformer.

BUT you should verify that something in the mixer didn't short out and damage the supply.

After you relace the smoked parts (likely the TOP245Y offline regulator chip is gonzo... then you use this trick to restart the unit safely:

Put a 60 Watt light bulb in series with the hot side of the input power line. I would recommend you use an ISOLATION transformer when working on the power line side of this for safety.

Jan 17, 2009 | Behringer Pmp3000 16 Channel Audio Mixer

Not finding what you are looking for?
Behringer Rx 1202fx 12 Channel Line and Microphone Mixer Logo

Related Topics:

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Ben Armstrong

Level 2 Expert

334 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...