Question about Texas Instruments TI-30XA Calculator

Hi I have a TI-30XA Texas Instruments calculator and I was wondering how to imput scientific notation into my calculator

Hello,

1. To convert a number to scientific equation, use [2nd][Sci]

Exemples 12345 [=] screen shows 12345 Then [2nd][Sci] coverts it to 1.2345 ^04 to the power 4.

2. To enter directly a number in scientific notation (e.g. -1.2345 X10^(-65) a very small number) you use the [EE] key 1.2345[+ /-][EE][+/-]65 shows as -1.2345 -65

1.6X10^(-19) 1.6[EE][+/-]19 shows as 1.6 -19

Hope it helps

Posted on Sep 17, 2009

Scientific, Engineering, Floating decimal, and Fixed decimal.

Full details are in the "Notation" section of the manual.

Full details are in the "Notation" section of the manual.

Sep 12, 2011 | Texas Instruments TI-30XA Calculator

Absolutely. Press 2nd [SCI] to switch to scientific notation.

Aug 31, 2011 | Texas Instruments TI-30XA Calculator

You can put it in scientific notation by hitting 2nd and 5. It will put your answers in scientific notation and not round that particular answer you have.

May 10, 2011 | Texas Instruments TI-30XA Calculator

On a TI-30XA the EE key is just above the 7 key.

On a TI-30XIIS the EE is the shifted function of the key just above the 7 key.

On a TI-30XIIS the EE is the shifted function of the key just above the 7 key.

Feb 01, 2011 | Texas Instruments TI 30XIIS Scientific...

Press 2nd [SCI]

Sep 21, 2010 | Texas Instruments TI-30XA Calculator

ec1.images-amazon.com/media/i3d/01/.../**MANUAL**000010660.pdf

manual above YES it IS a Scientific calculator indeed.

manual above YES it IS a Scientific calculator indeed.

Aug 13, 2010 | Texas Instruments TI-30XA Calculator

Hi,

The number displayed is 3.006 x10^12 or 3 006 000 000 000. It requires 13 digits to dsiplay but the calculator does not have that may places, so it reverts to scientific notation**even if the mode is et to 'standard'.** If numbers are too small or too large the calculator uses scientific notation **regardless **of the display format the calculator is configured for.

Hope it helps

The number displayed is 3.006 x10^12 or 3 006 000 000 000. It requires 13 digits to dsiplay but the calculator does not have that may places, so it reverts to scientific notation

Hope it helps

Nov 10, 2009 | Texas Instruments TI-30XA Calculator

It's been a while since my TI calculator died, but I think you can just hit EE (may be "exp" on your model) followed by =.

Aug 28, 2009 | Texas Instruments TI-30XA Calculator

z=e over i z= 480 over0.6 z= blank

Jan 25, 2009 | Texas Instruments TI-30XA Calculator

If you mean using the "EE" key it's straightforward.

To enter scientific numbers, enter the number, then press EE, then the exponent value. The TI-30XA will stay in scientific display until you "clear" or turn it off. It will also switch to scientific notation if you multiply big numbers that exceed the display.

E.g. Input 3, EE, 10, X, 3, EE, 10, =, gives you the answer 9 times 10 to the power 20. Press the "square root" key and you will get back 3 times 10 to the power 10.

You can mix entries too, e.g. 3, EE, 10, X, 2, =, gives you 6 times 10 the power 10....

To enter scientific numbers, enter the number, then press EE, then the exponent value. The TI-30XA will stay in scientific display until you "clear" or turn it off. It will also switch to scientific notation if you multiply big numbers that exceed the display.

E.g. Input 3, EE, 10, X, 3, EE, 10, =, gives you the answer 9 times 10 to the power 20. Press the "square root" key and you will get back 3 times 10 to the power 10.

You can mix entries too, e.g. 3, EE, 10, X, 2, =, gives you 6 times 10 the power 10....

Nov 29, 2008 | Texas Instruments TI-30XA Calculator

1,711 people viewed this question

Usually answered in minutes!

×