I HAVE A SONY WEGA KV-36HS420 THAT'S IN STAND BY WITH THE RED LIGHT FLASHING 6 TIMES.I HAVE TRIED DISCONNECTING FROM POWER SURGE PLUGING TV INTO OUTLET ,TV CAME ON FOR A FEW HOURS ,AFTER TURNING OFF, TV RETURN TO STAND BY FLASHING 8 TIME CAN THIS BE FIX @ WHAT PRICE? THANK YOU

I have fixed this problem, on one of these.

It is a voltage regulator, and it probably died after a power outtage or surge,
am I right?

Get it to a fixer guy, Its a very affordable repair.


are you in VB? I'll do it!

i found this hope it helps ya http://www.agoraquest.com/searchbb.php?term=5+blinks+Sony+KV&addterms=all&forum=all&submit=1&sortby=p.post_time

U have a soldering iron,desoldering pump or a roll of desoldering braids,a roll of solders?Can u do basic soldering and uderstand basic electronic?FBT- the flyback transformer,the big black block of a plastic with a red wire with a cap hook to a CRT-tv picture tube.Near the big block of a plastic with a red wire with a cap hook to a CRT picture tube.Inside to the right of the FBT,there are 2 power supply ICS,those 2 ICS are dead.Replaced these 2 power supply ICS near the FBT,will solved this tv LED power light indication blinking and will have stable tv power again,and tv will work.

you have to check you timinig on/off setting.

IC/high power transister(s) and/or other componentshas gone bad gone bad - usually from a power surge. These will have to be replaced. A technician should check these out for you. 

Ur high voltage is dead,FBT,flyback transformer is deaad.The big block of plastic with a red wire with a cap hook to a CRT(crt tube).

Sony FD Trinition Wega KV-32HS510 Try to turn tv on -it starts then shuts off -stand by lights keeps flashing. Memory stick light flashes then goes off.

The blinking is an indication that the set detected a problem. The code usually indicates a bad regulator circuit. If yu can solder, you can probably fix this your self. Please let me know if you wish to attempt the repair. If not, expect a parts cost in the $25-$40 range plus the local labor rate for the repair.

smack it on top a couple of times, it works for me :)
if ya cant duct it, smack it...
seriously...

I get a black screen after power on...then a bright white light in the middle of the screen.Then the red light flashing and turns it self off.