Question about Akai CF2791 27" TV

2 Answers

Power outage caused child lock, 2729 model tv

We constantly have short power outages but the most recent one locked up my tv. I was about to start a movie, then the power went out and when I turned the TV back on there was a red M at the top of the screen. Figuring it was a TV glitch I turned off the TV, waited for a minute then turned it back on, where the M was replaced with a CHILD LOCK. I can´t find my user manual and can not use the TV at all. I´ve tried pushing buttons on the remote, turning off the TV for hours, unplugging the TV, everything I could think of. The TV is actually an Akai CFT-2729, and the remote control is Akai CK5D-C7.

Posted by on

  • Anonymous Nov 03, 2007

    el tv enciende y apaga con el control pero en la pantalla aparecen las palabras child lock on y no se ve nada ni utilisando el boton menu puedo desbloquear el tv

  • Anonymous Nov 03, 2007

    el tv esta bloqueado solo parecen las palabras child lock on



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 934 Answers

I'm guessing what you have there is an Akai CFT2791 made by Samsung? And a CFT2729 is not a good model number. You will need to get into the menu and then sub menus to change or turn off the child lock feature. The procedure is well described in the owner's manual and I have the manual. You can email me privately I'll send it to you... Bill

Posted on Jun 04, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Necesito un flaybat para este modelo como lo puedo adquirir donde? Vivo en panama

Posted on Dec 26, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Samsung Rs2530B frig had power outage, now cubed ice is blinking and water and ice dispensers are not working.


Apr 26, 2017 | Samsung Washing Machines

1 Answer

After a power outage, the Locked display remained on, not allowing me to reset the clock or use the oven portion. Q: How to unlock the Locked display?

On most controls, there is a child lock so kids can not start appliances. This sounds like what has happened. Look for a button that you hold down to unlock. You might have to read your owners manual. Good luck

May 21, 2016 | Kitchen Ranges

1 Answer

We had a power outage and the display is blinking and there is no response to pressing any button

First, try unplugging the microwave for 2 to 5 minutes and then plugging it back in. Sometimes, a very brief power outage will be sensed by the control as an internal error and the control will lock itself out.

If it continues to blink and does not respond to key presses after this "hard reset", it is likely a portion of the control board could have been damaged from the power outage.

FYI ... the touch panel for this model is no longer available. I mention that because no response from any key press can also denote a shorted key pad.

Apr 15, 2011 | Frigidaire FMT116E1W Microwave Oven

1 Answer

My maytag washer mah5500b would not start after a power outage. it displays a code "do" and that's it. could you please tell me how to fix this?

power outage should not have caused this / but the do is (door) code it either didn't lock . or is unable to lock . the latch assem may have to be leplaced . try turning power of /just unplug and plug back in and try to program .. if it doesn't i would repl door latch .. pls feed back mm

Dec 14, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Pointer locks up on the desk top after a power outage

Tried a different mouse? Maybe the power outage fried it. pc2 mouse? If it the wirring is fried or the mother board for the mouse is fried then you could purchase a USB mouse if you have an available port.  Finally download the mouse driver and reload it first.   Any more questions please ask. Thanks〈=en&cc=us

Jan 19, 2009 | HP Compaq Presario SR1500NX (PX786AA) PC...

1 Answer

Opener on wall will not work after power outage

Actually it sounds like the vacation lock has been enabled. To turn it off press and hold the lock button for 2 seconds and test it out. If this is not it then you will need to replace the logic board and get a surge protector as well. Thanks BB

Nov 11, 2008 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Thermador SC302T clicking noise, locked door after power outage

iodine, open the upper oven, look thru the grill below the control panel on the right side and there is your model number. The issue here is that when the power came back on the oven run thru a test and your lower lock motor has failed. It will need to be replaced. Yes the only way to stop this is to shut off the breaker.

Feb 03, 2008 | Thermador SC302T Electric Double Oven

2 Answers

Power outage

you need to download the service manual from the web page. the child lock is activated.

Oct 05, 2007 | Gaggenau VF 230 Deep Fryer

2 Answers

TV making chirping sound when plugged into power outlet. There was a power outage and now the tv is just chirping. I did open it up just to see if any fuses were blown and the only fuse I could find...

If one of the secondary supplies is shorted, the power supply will "chirp" when plugged in. This is the power supply's way of protecting itself and this usually happens when the horizontal output transistor is shorted. The only real problem I find with front AV jacks is that they crack loose from the board, because they are subjected to the extra stress of the AV jacks being constantly plugged in and unplugged.

Jun 28, 2007 | Toshiba 32AF45 32" TV

Not finding what you are looking for?
Akai CF2791 27" TV Logo

690 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2326 Answers

The Knight
The Knight

Level 3 Expert

74990 Answers


Level 3 Expert

77932 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides