I want to configure my edimax router but when i enter 192.168.2.1 it asked me to enter a username when i used the dafault username and password the address didn't recognize it what i gonna do then? pls help.. thanks
If I'm not mistaken, you can't get to the user name password page unless you have already accessed the edimax setup page after typing 192.628.2.1, thus the solutions provided by some of our friends might not be of help.
An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: I cant acces to 192.168.2.1
Type in the default username admin, password 1234. Click
on Login. Then you can configure the router. If thats what youve been typing,try to locate the reset button,hold it down using a paper clip for like 10 secs. restart the router,restart the browser and access the router again,use the default username and pw
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
For most Edimax routers,
the default IP address is 192.168.2.1, default username is admin and password
By default the router is a
DHCP server which will assign IP address starting from 192.168.2.100 to
192.168.2.199 to DHCP clients automatically.
Make sure your computer has
TCP/IP Protocol setup as "Obtain IP address automatically".
Open the Internet
Type in http://192.168.2.1 hit Enter.
The Login window will
Type in the default
username admin, password 1234.
Click on Login.
Then you can configure the
To see the most information and be able to change it you need to follow these steps. 1. Open command pad (click start and search bar type cmd) 2. In the Command pad type ipconfig/all 3. Look for default gateway and remember that number. Will look something like (192.168.1.1) 4. Open a webpage and type that number into the address bar and hit enter. 5. It should ask you for username/password default uername is admin and password is 1234. 6. after that you should be in your route and navigate around it til your find what your looking for. Hope this helps Lot of bad talk about Edimax routers.
hello.. you will have to set this inside your router. to do so you can use some wizard in your router's CD or do it by hand using web configuration panel of the router. the manual setting is not hard to be done. i guess your router is all default settings, so to access the web interface, you have to open your web browser (Internet Explorer for example) and enter 192.168.2.1 in the address bar then hit enter. you should be prompt for user/password, and the default one are user: admin password: 1234 this will let you change settings. you will find the WIFI settings in the "General Setup" section. i am attaching link to the user manual, if you like to dig in to the settings deeper: http://www.edimax.com/images/Image/manual/Wireless/BR-6225n/BR-6225N_Manual.zip
First you need to know the access ADMIN Username and Password for your router? If you have the access then you can configure your router manually.
Identify what IP address of your gateway. >Start>CMD>IPCONFIG (check what IP address you have in gateway. use that ip address to access your router) example. >launch internet explorer then type the IP address into the address bar. >http://192.168.1.1
you will be redirected to a page will it asked for username and password. then you need to enter the information. if you dont know the admin un and pw contact your ISP. but most of the default UN and PW is Username: admin Password: admin
once you able to get into the GUI of your router then go to configuration for the PW to lock your network.
It's not a problem connecting to internet if your isp is smartbro, esp. if you are using a D-Link router..just plug in ur smartbro rj45 to the WAN port and connect ur pc to one of the 4 LAN port of the router that's all you can connect to internet..first time of course u have to input the username and password from smartbro in order to connect again..
Warning the following instructions are likely to RESET THE ENTIRE CONFIGURATION OF THE ROUTER and you will need to reenter it completely. Do not follow these instructions unless you are prepared to reconfigure your router completely from the factory defaults. I am not sure but be careful or consult with EDIMAX support before proceeding.
note the following is from the http://www.edimax.us/ website follow technical support and click