- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have a digital control, it is designed to flash "E" on the display to notify you that a problem may have been discovered. Gradient controls and warming throw controls use a blinking indicator light for this purpose.
Follow the instructions on the flag tag to reset the control or follow the steps below.
Unplug the system from wall outlet.
Check that the control is well connected to the module.
Plug the power cord into the wall outlet.
Set the control to "on".
If the system still does not operate, disconnect the power cord and contact sunbeam Sites sunbeam Site
Same problem, but now it is ok. I emailed Sunbeam and was told that if my blanket was not plugged directly into a wall outlet it was not getting enough power and I needed to plug it into a wall outlet taking these steps:
1) Unplug from the surge protector/extension cord
2) Unplug from the blanket
3) Plug back into the blanket
4) Plug into a wall outlet