My washer is ONLY leaking during the rinse/spin cycle. There are only 3 hoses and non seem to have leaks. It's as if the water is coming from under the washer. It does not leak during any other cycle.
SOURCE: Maytag Washer leaking from the bottom
It will be the normal trial and error. Remove the top lld and the back panel.statt the wash again and start looking for anything obvious. Start from the soap box, then carefully look down the sides and then if nothing seen, switch machine off and tilt machine untill you can see the underneath. Look for any areas where there is water .(when visible start looking a little higher untill you find the spot.) Most of the underneath areas are likely rust spots that have broken through.. On occation the pipes are perferrated and have a small leak. All observation.
890 views
Usually answered in minutes!
×