Question about Kenmore 30464 / 30465 / 30469 Gas Single Oven

1 Answer

Kenmore gas oven

We have a kenmore gas oven that gives an F10 and sometimes an F9 error message usually after having just used the oven and turned it off but sometimes it occurs while we are trying to cook something making it impossible to finish cooking because the oven has to be turned off to stop the beeping error and then when you turn it back on it begins beeping again. From what I see so far you seem to be quite knowledgeable and I'd appreciate any and all help you can give.

Posted by on

  • emt4life15 Feb 07, 2009

    F9 error cant turn the oven on.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After the gas stove have been on a while a loud whoosh that is a constant thing comes on. I thought it was getting ready to explode. I took seconds after we turned the gas off for the noise to stop. Any ideas what this coud be

Posted on Jan 26, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

F10 error message oven 790.9612

Hello & Welcome to FixYa

Error code F10 is displayed due to electronic oven control failure and the only way to solve this problem is by replacing the control board which is bad. Sorry for the bad news but hope you understand... Please get back to me if you have any other questions.


Mar 12, 2011 | Kenmore Ovens

1 Answer

What is F10 error code
Hi this website above directly addresses your issue.
F10, is an Over temperature, usually a bad thermistor or similar, as related see above post. For ID & repair parts and all.

Nov 01, 2010 | Kenmore 30464 / 30465 / 30469 Gas Single...

1 Answer

I have a kenmore stove not sure which one since it came with the house. when we use the oven the clock reads f10 and it beeps. we turn it off and with in a few minutes it starts up again. sometimes hours...


Thanks for using FixYa. F10 error means that the Electronic Range control (ERC) has gone bad and should be replaced. However, before replacing it you can take the screws out and then blow some air with the help of hair dryer so that if there is any moisture it blows it off. If still the issue is not resolved then replaced the ERC. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Aug 26, 2010 | Kenmore Ovens

1 Answer

What does it mean when the oven beep and F10 is on the screen

Go online and type in your model number and ask what the F10 code means. Every stove is slightly different. Mine did the same thing and the F2 code came on. Meant the sensor was gone and I replaced it in 10 minutes for under $80. Even a novice can do it. Perhaps same with yours, perhaps not.

Jan 08, 2010 | Kenmore 33169 Gas Single Oven

1 Answer

Kenmore oven error code f10

on that type of range F10 indicates a problem within the electronic control, but it could possible be caused by a faulty temperature sensor.

I would recommend service from a technician

May 27, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Kenmore Gas oven is giving F8 error code

Unfortunately the F8 usually means an EEPROM data shift error. Try turning the power on and off several times. If error continues, you have no choice but to replace the ERC. Check on line for the best price. There is a group in the Chicago area that repairs ERCs. Check them out at The failure of the your power system may have been associated with a surge either as the power went off or when it came back on. It may have been the surge that did the damage.

May 19, 2007 | Kenmore 30464 / 30465 / 30469 Gas Single...

Not finding what you are looking for?
Kenmore 30464 / 30465 / 30469 Gas Single Oven Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Ovens Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Brad Brown

Level 3 Expert

16852 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides