Question about Mitsubishi VS-55601 55" Rear Projection Television

1 Answer

Mitsubshi VS-55601 My tv will not power on. about two weeks ago the green light would come on but no picture would come on. Then I tried it again but nothing happened. I checked the cord and took the back panel off to see if there was anything loose but I did not find any loose connections. What do I need to do and is it worth trying to fix this problem. The TV is so heavy and I have it up stairs I would hate to take it down but if its not worth it I can start taking it apart to get it down. Thanks for any help you can give me.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 133 Answers

The problem is 6 capasitord on the DM board, if you look in the back, there will be a metal box standing up, there is a board inside it, it has 6 capasitors on that need to be unsoldered , and solder new ones on, they are 16 volt 1000 mf caps, they cost about $1.50 a piece

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a Mitsubishi WD 52628. I replaced the tv


try turning it on hold the menu button for eight seconds menu pops up try reseting the settings again as before you had the problem

Jan 23, 2010 | Mitsubishi WD-52628 52" Projection HDTV

1 Answer

Mitsubishi Proj. TV,Model VS-50603, S/N 119340, won't turn ''ON'' when pushing TV ''ON'' button or remote. Green ''ON'' light comes on and then immediately off. Whats the problem?


62" mitsuabishi WD62525 had it over 5yrs now, we have been changed lamps three times,(geee lots money!!!)it worked ontill now...
two weeks ago blinking red lamp light was on , i thought lights out again so soon, i order new lamp, i cant turn on TV but blinking green timer light, TV is not working, try reset botton, turn off TV few days.
Please help
Lilly

Dec 06, 2009 | Televison & Video

1 Answer

Mitsubishi vs 55601 picture has gone out. It was


I have found several of the vertical deflection caps to be off value as well as the vertical chip to be defective.First after pulling the chassis (mark plugs and sockets that have no id numbers with a mark a lot) look with magnifier around vertical and hi section for circuit board cracks that need resoldered.Hope this helps.
Technition

Nov 17, 2009 | Mitsubishi VS-55601 55" Rear Projection...

1 Answer

I have a convergence problem on my Mitsubishi VS-55601


ICS with some resisters,tries these websites Tv rpair Word.com or Tv repair kits.

Nov 02, 2009 | Mitsubishi VS-55601 55" Rear Projection...

1 Answer

How do I deguassa VS-55601


Many manufacturers put a software degause feature in the main menu. There should be an option for deguassing, I am not a hundred percent on this model but if you look in your operations manual it will tell you if this option is available. If not you can purchase a deguaser at a local electronics supplier. It is basically a round donut shaped electro magnet use caution and follow the instructions. Remember in the future to always keep external speakers away from your TV sets..

Jan 27, 2009 | Mitsubishi VS-55601 55" Rear Projection...

1 Answer

Tv repair


There is no chip for the green, Unless he is refering to the convergence Ics as there are two of them and one controls red convergence and half green, and the other controls blue convergence and the remaining green. Those ICs are 20.00 each and take about 30 minutes to replace both. Is your set experiencing a 3D type of picture?

May 24, 2008 | Mitsubishi VS-55601 55" Rear Projection...

1 Answer

Mitsubishi vs-55601


Try resoldering the vertical output IC that should solve your problem

May 10, 2008 | Televison & Video

1 Answer

Mitsubishi tv will not turn on


I was trying to hook up a converter box to my 65" Integrated HDTV widescreen Model #WS65613 to see if I could get better reception on it. I live out in the country and have to have satellite, so I wanted to see If it worked, it did not. Well in the process the screen is blue and cannot get a channel at all, the antennia says channel 3 and I cannot get my satellite to come back on DBS to hook my satellite back up, it's not the Dish or reciever because the other tv works. Please help?

Apr 23, 2008 | Mitsubishi VS-55601 55" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1198 Answers

The Knight
The Knight

Level 3 Expert

69938 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...