Question about Logitech Quickcam Chat Webcam

1 Answer

Audio not working for Quickcam

I have a logitech quickcam E 2500. all is fine but when I try to do a video call the sound isnt working.
the sound isnt muted
and the speakers are turned on, but do I have to turn them down?

please help!

Posted by on

  • bobcool64 Jan 09, 2009

    Its not for skype but for webcam.. soz I put it into the wrong subject thanks anyway

  • bobcool64 Jan 09, 2009

    damn Im stupid I meant for msn messenger

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 827 Answers

Hi,
Go into Skype Tools, then click Options, and then Audio Settings, and make sure you are using the 'correct' speaker and it works when you test it. Sometimes the default speaker is not the one that the soundcard driver is using, so try each of them from the list.
Remember to Save it.

Hope this helps

Chris (ziraffa)

Posted on Jan 09, 2009

  • chris grams
    chris grams Jan 09, 2009

    Well, not to worry, mate.. in MSN it's under Tools, Audio and Video setup..
    If that sorts you out be sure to change my rating to Fixya!
    Laters
    Chris (ziraffa)



×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My camera quit working in skype, any suggestions in troubleshooting? the green light isnt coming on at all, it was working like 5 minutes ago


To test if the Logitech QuickCam is functioning, check the USB cable, make sure it is connected properly. Then click on Start - All Program - Logitech - Logitech QuickCam and see if you can get the camera to capture your image/video.
If this works then the fault is with the Skype configuration. Sometimes the WEBcam settings drop off and the WEBcam need to be selected again. Open Skype - Tools - Options - Video Settings and select the Logitech QuickCam
Also check the Audio Settings for the Microphone THEN click on Save.

Dec 14, 2009 | Logitech QuickCam Connect Webcam

1 Answer

Does the logitech quickcam express not come with a microphone?


Go to the logitech website http://www.logitech.com and click on the support tab they have experts there who will e-mail you solutions and work with you to help solve the problem.

Aug 23, 2009 | Logitech QuickCam Express Web Camera

1 Answer

Logitech Quickcam Chat No Audio When Recording Video


WHEN UR MESSENGER IS OPEN.........CLICK ON TOOLS AND THEN AUDIO/VIDEO SET UP....SEE IF THAT HELPS

Apr 16, 2009 | Logitech Quickcam Chat Webcam

1 Answer

QuickCam mic doesn't work


I read another post that said to go to Logitech itself for up-dates. This I did......downloaded all new drivers, etc. (the disc that comes with the cam must be out of date !). Then when that was done, I went back on Skype and where you do a 'voice test' I was able to this time around to "choose" my webcam - this was not coming up before at all. So in doing that it activated the mic on the webcam and all was OK. We seniors are supposed to be savvy with the forever changing world of electronic devices today! (LOL)

Feb 12, 2009 | Logitech QuickCam Messenger Web Camera

1 Answer

QuickCam mic not working


Normal 0 Go to Control Panel and Click on Sounds, Click on Audio, then Click on the Microphone. Then Click on the drop down and select Camera Microphone.
Click OK and it should work.
Hope this helps. Bud

Apr 06, 2008 | Logitech QuickCam Express Web Camera

4 Answers

Logitech quick cam communicate stx on Vista - microphone not working


Why isn't the microphone on my camera working?
trnsp.gif Answer The microphone may not work because of a hardware or configuration problem. To determine if it's a hardware problem, test the microphone in Sound Recorder.

  1. Click "Start," > "Programs" ("All Programs" for Windows XP) > "Accessories" > "Entertainment" > "Sound Recorder."
  2. Click the Record button and speak into the microphone of the camera. You should see the green line move, indicating the application is picking up sound.
  3. Click the Stop button.
  4. Click the Play button. If there is no sound at playback, check to make sure the correct device is selected.
    1. Click "Edit," then "Audio Properties."
    2. Make sure Logitech is listed as the Preferred device for "Sound recording."
The microphone may also be defective. To test this, try the camera on another USB enabled system.
If you can record sound in Sound Recorder, but not in the QuickCam application, try setting the Logitech Microphone as the Preferred device in Audio Properties.

This article covers how to configure a Logitech camera's audio and video settings to work with Skype 3.6 or above. trnsp.gif Answer This article applies to the following cameras:
QuickCam Orbit AF
QuickCam Pro for Notebooks
QuickCam Pro 9000
This article applies to the following platforms:
Windows Vista
Windows XP
This article applies to the following 3rd party application:
Skype™ 3.6 or above

To set up Skype for video please be sure that your Logitech webcam is connected and working. This can be verifed by launching your QuickCam software and checking for a video stream withinin the QuickCapture video window. Once the webcam functionality is verified, please close the QuickCam application and follow the steps below.
  1. Launch Skype™ and click on "Tools" as shown in the figure below
    16439.jpg
    Fig 1
  2. When you click on "Tools" you will see a drop down list
    16440.jpg
    Fig 2
  3. Click on "Options" at the bottom of the drop-down list
    16441.jpg
    Fig 3
  4. A new screen appears. Click on the left side of the pane under "Video Settings"
    16442.jpg
    Fig 4
  5. Under the "Select webcam" drop down, please choose your Logitech camera, then click the "Save" button.
    16443.jpg
    Fig 5
  6. Click on "Tools" as shown in Fig 6 to get your Logitech Audio setup.
    16444.jpg
    Fig 6
  7. When you click on "Tools" you will see a drop down list
    16445.jpg
    Fig 7
  8. At the very bottom of the drop down list, please click on "Options"
    16446.jpg
    Fig 8
  9. When you click on "Options" you will see a new screen
    16447.jpg
    Fig 9
  10. On this new screen click on the left side of the pane under "Audio Settings"
    16448.jpg
    Fig 10
  11. You will now have the option to select your Logitech camera's Microphone as your main Audio source. Under the "Microphone" drop down, select the Logitech Microphone, and click "Save"
    16449.jpg
    Fig 11
  12. You should now be ready to use your Logitech webcam and microphone in a Skype video call.

Mar 25, 2008 | Logitech QuickCam Communicate STX Personal...

1 Answer

New QuickCam Pro for Notebooks


Try uninstalling your web cam from device manager, then re-installing the latest drivers from Logitech website here: http://www.logitech.com/index.cfm/435/3055&cl=us,en

cheers

Feb 06, 2008 | Logitech QuickCam for Notebooks Pro...

1 Answer

Logitech Quickcam Chat - No audio


Try testing it, last time I checked skype has a test section, its hard to find, but its there. You just talk into the mic and skype records it. Then play back.

It is possible the mic isn't working.

Before you consider taking it back, make sure you follow the instructions to the letter.

Dec 25, 2007 | Logitech Quickcam Chat Webcam

1 Answer

Mic problems


Normal 0 Go to Control Panel and Click on Sounds, Click on Audio, then Click on the Microphone. Then Click on the drop down and select Camera Microphone.
Click OK and it should work.
Hope this helps. Bud

Sep 04, 2007 | Logitech QuickCam Communicate STX Personal...

Not finding what you are looking for?
Logitech Quickcam Chat Webcam Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Webcams Experts

gaucherre

Level 2 Expert

180 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

Are you a Logitech Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...