Tally error code 2147483650 how to solve the problem

This error may occur if the registry entries and the drivers for the mass storage controller hardware in the backup computer are not installed in Windows. Download any reliable program like I always use Reginout to fix such errors by using its Repair Registry feature. And update drivers.

To fix this, follow the steps below:
1. Back up your Tally data.
2. Make a new folder under the Data and then change the name of the folder with a 5-digit number such as 11111.
3. Copy the files below from the corrupted folder to your folder 11111.
Company.900, Linkmgr.900, Manager.900, Tranmgr.900 and Camsave.900
4. Click Start and then Run and then type the command C:\Tally.ERP9\tally.exe data 0.
5. Press Ctrl+Alt+R and click Yes to confirm. Wait until the process is done.
6. Exit Tally and re-open it to see if the problem has been resolved.
Alternatively, if the above steps didn't work for you, remove Tally and all its components completely. And then restart your computer and reinstall it again to replace all the corrupted files.

Click start control panel administrative tools computer management then select event viewer this may vary depending on what operating system you have extend the events there you will see errors in red you will no what exactly what the error was and at what time it occured Right click on the error message select properties you will see all details about the error or click start type in event viewer press ENTER you might be able work your way through the problem if you need more help with this post a reply with the error message details Hope it helps.

have eror 'H:\tally9\11-12\10006\tranmgr.'
size 2180096
Position:2182144
chars 512 (done 0)
so i can not add new data please solve this problem.

Step 1
open drive where data is save
after it open your company data folder
than you have find a file (TMESSAGE.TSF)
it's error code 0
select this file and deleted its
after above process 100% your problem solve out

--------------------------- Error ! --------------------------- Exiting TALLY! Internal Error. Contact Tally Solutions. Software Exception c0000005 (Memory Access Violation)

please solve it

My tally 5.4 not open when to try open tally when see exiting tally! file not found. Please give the solution immediately 

256 mb RAM

Exiting TALLY internal ERROR contact tally solution software
how to solve this error please give me solution step by step.

Error! Exiting Tally! File Name C:\tally\data\004\Tr01320.500 Size 196608 Position 196608 Chars 128 (Done 0).