Question about Canon imageCLASS MF8170C All-In-One Laser Printer

6 Answers

Error code #0046

I have a canon MF8170c, I am not receiving all of my faxes (about 1 in 10) on the rx activity report it givces an error code #0046, this code is not in the manual..any suggestions?

Posted by on

  • 1 more comment 
  • conscape Jan 09, 2009

    I tried unhooking all cables and reconnecting and still nothing. I also replaced the phone cord from the printer to the wall thinking my cord might be bad, nothing. I tried faxing from another line and it comes up on the transmitting machine as "No answer"...so I thought maybe it's the line itself, but when you call from a regular phone you automatically get the fax screech in your ear..crazy!

  • conscape Jan 09, 2009

    Just a note, this printer does not have an on/off button it just says energy saver, to turn it off-off you have to unplug it

  • conscape Jan 09, 2009

    I can send faxes no problem, scan no problem, and print with no problem. I checked my country settings also and we are all good there.

×

6 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 66 Answers

Uninstall it then reinstall it again step by step configuration.. from copying to faxes you can see it in the manual

Posted on Jan 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 183 Answers

Hey sir,
just reinstall or update Firmware for you printer and it will be fine.

thank you,

Posted on Jan 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 142 Answers

It's connactikon earr u need to chek country set in yr pritner also chek fax setting which compitable with yr country also try to do fax to different use to make sure bout eny other problem..

Posted on Jan 09, 2009

  • Chinmay Joshi
    Chinmay Joshi Jan 09, 2009

    if u wan to recive fax there is no need for pc so u can do one thing in setting menu on yr printer do factory reset or defult setting or reset all setting then try to recive it'shelp u

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 565 Answers

Its the problem with delayed TX

Posted on Jan 09, 2009

  • Teet Bergmann Jan 09, 2009

    Go canon service and ask how to fix it

  • Teet Bergmann Jan 09, 2009

    its just memory problem in activity report and its saying its the prblem with tx delay

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 1,257 Answers

Click on the link below and follow the instruction for  Error codes and how to fix them .Though the printer model is different but the solution will work for your printer too

http://www.fixyourownprinter.com/forums/inkjet/24961

Posted on Jan 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 435 Answers

Hi,
Switch of the printer. Disconnect all the cables.
connect them back and switch it on and try.
If the code still shows up, let us know.

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I get a paper conformation for faxes on a cannon mx922


From page 98 of the fax users manual:
"This report is printed after each fax reception.
• At the time of purchase, the machine is set so that RX REPORT is not printed at all.
You can set the machine to print RX REPORT each time it receives a document, or only when an error occurs by selecting RX report in Auto print settings under FAX settings."

You should have the manual on the cd that came with the printer. If not try the link listed.
Canon Consumer Home Office PIXMA MX922

Dec 22, 2014 | Canon PIXMA MX922 Wireless All-in-One...

1 Answer

Can you please tell me how to print Fax activity report each time? means whenever I send a fax I need confirmation receipt thats its gone through.Can't find anything in Manual.


ACTIVITY REPORT

The FAX is factoryset to automatically print an ACTIVITY REPORT after every 20

transactions. If you want to print an ACTIVITY REPORT before it is automatically

printed, follow this procedure:

Transactions in an ACTIVITY REPORT are listed chronologically.

1 Press Function.

2 Press Report.

3 Press OK.

• The FAX prints an ACTIVITY

REPORT.

• If you prefer the FAX not to print an ACTIVITY REPORT after every 20 transactions,

disable the ACTIVITY REPORT setting ( p. 145).

• Please note that only one transaction number (TX/RX NO.) is assigned when you send

a document to several fax numbers in one operation.

ACTIVITY REPORT

PRINTING REPORT

????????????????????????????????????????

????????????????????????????????????????

????????????????????????????????????????

27/12 2002 15:00 FAX 123 4567 CANON 001

ACTIVITY REPORT

ST. TIME CONNECTION TEL CONNECTION ID RESULT

* 27/12 13:43 905 795 1111 Canon CANADA 5001 AUTO RX ECM 1 OK 00'33

* 27/12 13:45 905 795 1111 Canon CANADA 0001 POLLING RX ECM 0 OK 00'00

0 STOP

* 27/12 13:51 03 3758 2111 Canon TOKYO 0002 B'CAST ECM 3 OK 01'18

* 27/12 13:53 2 887 0166 Canon AUSTRALIA 0002 B'CAST ECM 3 OK 01'18

* 27/12 14:10 905 795 1111 Canon CANADA 5002 AUTO RX ECM 1 OK 00'18

* 27/12 14:16 2 887 0166 Canon AUSTRALIA 5003 AUTO RX ECM 4 OK 03'59

* 27/12 14:27 20 545 8545 Canon EUROPA 0003 DELAYED TX ECM 1 OK 01'20

27/12 14:30 20 545 8545 Canon EUROPA 0004 DEL SQ BDCST ECM 1 OK 00'36

27/12 14:31 03 3758 2111 Canon TOKYO 0004 DEL SQ BDCST ECM 1 OK 00'36

27/12 14:57 2 887 0166 Canon AUSTRALIA 0005 TRANSMIT ECM 3 OK 01'25

0 STOP

27/12 14:59 1 432 2060 CANON OPTICS 0006 TRANSMIT 0 OK 00'01
0 #018

go to this site to download manual (see page 11-3)
http://files.canon-europe.com/files/soft30110/manual/FAX_L220_L295_UG_ENG.pdf

Dec 16, 2010 | Canon L220 Plain Paper Laser Fax

1 Answer

Our RX report for our Canon 830i fax machine lists a transaction failed (NG) with error code #0106


This error usually means you have a phone line problem.

You need to try to increase your transmission level, or check the line equalization. It could also be a problem with an echo on the phone line.

Dec 16, 2009 | Canon Laser Class 830i Plain Paper Fax

1 Answer

On my Canon MX310, the display says "Waiting for Report". Fax Memory is clear, but the In Use/Memory light stays on.


Try this step ... found it on Canon's website

Issue: ERROR LCD: WAITING FOR REPORT
Solution: Set [AUTO PRINT RX] to ON (MX300 / MX310)

AUTO PRINT RX When [AUTO PRINT RX] is set to [OFF], incoming received faxes will be temporarily stored to memory and transaction reports (TX, RX and Activity) remain in memory. The default setting is [ON], which means incoming received faxes and transaction reports will automatically print. The fax machine will not automatically print a received fax and will store it in memory in the following conditions.
  • Ink is low or has run out
  • The paper size and type is not set correctly
  • Paper has run out
  • The Output Tray is closed
To set AUTO PRINT to ON, please follow these steps.
  1. Press the <FAX> button to enter the Fax menu.

  2. Press the <Menu> button. [FAX SETTINGS] is displayed

  3. Press the left or right arrow button to select [RX SETTINGS] , then press <OK> two times.

  4. Press the left arrow to select [ON], then press <OK>.

    Note: When AUTO PRINT RX is set ON, a sub-menu will appear to PRINT WHEN NO INK.

  5. At sub-menu PRINT WHEN NO INK, decide if you'd like the machine to continue to print incoming received faxes if ink is low.

    CAUTION: When this option is set ON, the fax machine will not monitor the ink level of the ink cartridges. If ink is low or out, received faxes will print with streaks or blank. Furthermore, once the fax is printed, it will be deleted from memory.
    1. To print received faxes when ink is low or out, press the left or right arrow to select [ON] and then press <OK>.
    2. To store received faxes in memory when ink is low or out, press the left or right arrow to select [OFF] and then press <OK>.

  6. Press the <Stop/Reset> repeatedly to return to Fax standby mode.

Nov 17, 2009 | Canon PIXMA MX310 All-In-One Printer

5 Answers

I am still unable to receive faxes that are printed automatically when they arrive. they mst be going to memory and i cannot get them to print out of memory. can yo please help me. i paid for this service...


If you are getting a low ink message no you will not be able to fax until this is resolved. Once you replace the ink cart. then you can get to the steps where you can clear the fax memory until then the steps that we would give you will not work.

You can visit www.canon.com click on your printer model then on support and you can download the manual in this manual there will be step by step instructions on how to clear the memory on the fax. this can also be cleard once you print them keep that in mind. so first purchse ink then your going to print your faxes by hitting that button twice the reason why it will not work now is because your low on ink.


If you like this solution please hit accept.


Thanks

Jul 17, 2009 | Canon MX310 Office All-In-One Printer

2 Answers

How can i get a fax from memory.


Solution: Printing reports and lists MX310

Printing reports and lists The table below shows the reports and lists that can be printed from your machine.
Report or List Description ACTIVITY REPORT Shows recent facsimile transactions performed by your machine. You can enable or disable automatic printing of this report after every 20 transactions. You can also manually set the machine to print it. CODED SPEED DIAL
LIST
Lists the destination numbers and names registered for coded dial speed dialing. USER'S DATA LIST Lists the current settings of your machine and the registered sender information. MEMORY LIST Lists the documents currently stored in the machine's memory. TX (Transmission)
REPORT
Prints after transmission of a document.
You can enable or disable this feature, or set the machine to print a report only when an error occurs.
You can also set the machine to print the first page of the document under the transmission report to remind you of the contents of the document.
RX (Reception)
REPORT
Prints after reception of a document.
You can enable or disable this feature, or set the machine to print a report only when an error occurs.

To print the Activity Report, Coded Speed Dial List, User's Data List or Memory List: 1 . Press <FAX>, then press <Menu>.
2 . Use leftright.gif to select [PRNT REPORT/LIST], then press <OK>.
3. Use leftright.gif to select the desired report, then press <OK>. The report or list is printed.

Mar 24, 2009 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Need to cancel RX report page


Flip open the one touch panel, Punch "Data Registration" arrow right to #3 Fax Settings, punch set, arrow right to Report settings, punch set, arrow right to RX Settings, punch set, Arrow right to OUTPUT NO, punch set. punch stop, your done!

Feb 19, 2009 | Canon LaserCLASS Fax 710 Printer

1 Answer

I want to have the MX310 to answer on 4 rings


Change the ring count 1. Press the <Menu> button repeatedly until [FAX SETTINGS] is displayed.
2. Use the [ left.gif] or [ right.gif] to select [RX SETTINGS] then press <OK>.
3. Use the [ left.gif] or [ right.gif] to select [ RING COUNT] then press <OK>.
4. Use the [ left.gif] or [ right.gif] to select the desired number of rings. Press <OK> then press <Stop/Reset>.

To print the Activity Report, Coded Speed Dial List, User's Data List or Memory List: 1 . Press <FAX>, then press <Menu>.
2 . Use leftright.gif to select [PRNT REPORT/LIST], then press <OK>.
3. Use leftright.gif to select the desired report, then press <OK>. The report or list is printed.

Try to download the manual

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=15603#DownloadDetailAct

I hope it helps!!!


The TX Report and RX Report print upon transmission or reception offaxes depending upon the settings made in [FAX SETTINGS->TXSETTINGS->TX REPORT] and [FAX SETTINGS->RX SETTINGS->RXREPORT], respectively

Dec 08, 2008 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Canon will not receive faxes or copy documents


see if you have fax line(conect a telefone in the line to see if you have tone) or if the cable is conected.

Nov 21, 2008 | Canon NP 7130 Black and White Copier

Not finding what you are looking for?
Canon imageCLASS MF8170C All-In-One Laser Printer Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1878 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...