Question about iLO 3200 32 in. LCD Television

1 Answer

Need to put tv on video 2 mode to use ps3 and no remote

Have lost remote for ilo tv and need to put it on video 2 in order to use ps3. Dish network remote will only change channel and volume and will not operate "input" or "tv/video" modes.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Have you tried running through the channels until they wrap around and start over again? Alot of TV's will throw the AV inputs in there before the first broadcast channels.

If not (and you're gonna hate my answer, but be kind to the messenger please!), you may have to purchase a new remote control from the manufacturer, which can be exorbitantly priced. Most 'Universal' remotes will act just like your Dish Network remote, and you will probably not be able to use any of your set's advanced functions through them.

I would recommend searching the web for the appropriate replacement remote control, you may get lucky on eBay and save a few bucks. Hope this helps!

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get my ilo tv to change the tv input with out tv remote


No. To select inputs, you must have its remote control.

Sep 28, 2012 | iLO Televison & Video

1 Answer

I need a code for a ilo television to Dish network


Hi, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. We have a few different codes for each of our different models of remotes. I will list here for you the best codes for a ilo TV for our more popular models of remotes and the instructions for addressing the remote to the TV. I hope this information is useful and if you have any further questions please let me know!

remote models remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 569, 720, 095, 743, 721, 500.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 569, 720, 128, 834, 729.
4.0 and 4.4 IR/UHF remotes - codes 720, 569, 500, 669, 549.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 569, 720, 500, 456, 506, 834.
20.0 IR and 21.0 IR/UHF remotes - codes 726, 559, 666, 596, 621, 596, 625.

Instructions for addressing the remote to the TV
1. Turn the TV on
2. Press and hold down the TV mode button until all the mode buttons light up red.
3. Enter the 3 digit code for you TV.
4. Press the pound(#) button once.
5. Try the TV functions to make sure it works.

Nov 05, 2011 | iLO 3200 32 in. LCD Television

1 Answer

How do i change tv 2 with reciever or remote 1, lost remote 2.


Hi this isMike Houston of DISH Network and I see you have lost your TV2 remote. Until youget your 2nd remote you can put the receiver in Single Mode and putTV1 on the channel you want to watch for TV2 and then put it back in Dual Mode.I can help you in getting your TV2 remote so you can watch TV on both setswithout having to change the Mode setting on TV1, I will send you my e-mail andyou can contact me through there; michael.houston@dishnetwork.com.

Aug 08, 2011 | DISH Network DVR-625 DTV Receiver /...

1 Answer

How do you put the tv on input for a dvd player with a dish net work remote when the original remote to tv is gone


you will need to program the remote to the dvd player, do you have the dish network manual. If not, what dish receiver do you have , I can get you thru it.

Mar 12, 2011 | iLO IWT3206 TV

1 Answer

I cannot use the DVD play function with the control box I have. The control box which came with the TV is lost can I get a replacement


We would be happy to help you with getting your DISH remote working with DVD player. In order for us to give you a specific code for your DVD player we would need to know the brand. We recommend performing a power scan; this scans the remote for a code that will work with your DVD player. Power scan instructions:

Step 1:
Press and hold the VCR/DVD mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once a second while pointing the remote at the desiredequipment. If the code for the equipment comes up, the equipment will poweroff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.
After doing the power scan please remember to put the remote back into SATmode. Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Feb 21, 2011 | DISH Network IR Remote Control

1 Answer

Hi I have an ilo television. I have lost my guide


You may have found the code already, but here are some codes and steps to help you out if you have not. There are two links enclosed below. The first link is for a power scan, where you can scan the tv for the right code.
Power scan:
http://www.dishnetwork.com/SupportSection/power-scan-instructions

The second, is a list of codes. If you choose to go this route, then you will need to follow these steps:
1. Hod down the clear TV button until all lights light up at the top of the remote
2. Punch in the 3-digit code
3. Press the pound (#) button under the number 9 on the numeric keypad
4. Try the volume and powering the tv on/off. If one or all of these functions do now work, start back at step 1, with a different code.
Codes:
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml


Becki Barned
DISH Network Customer Service

Jul 10, 2010 | iLO 2600 Television

1 Answer

The receiver does not respond to the remote or its buttons; there is no TV display and the V7 is displayed on the receiver's screen.


When you're pressing any of the buttons on your DISH Network remote, is there any mode button such as TV, SAT, or AUX,that lights up? To provide further explanation- when you are trying to change the channel up or down, or power on the receiver, as you press any of those buttons the "SAT" mode button should temporarily light up & then turn off to let you know the remote is in the correct mode to control your satellite receiver, this button is in the upper left hand corner of your remote that says "DISH Network" at the bottom. If this is not happening, then I would suggest replacing the current batteries with fresh batteries, if the problem continues with no mode buttons lighting up, then we will need to replace your remote. If you haven't resolved this issue already and need me to order you a new remote for you, please feel free to contact me direct & I will be more then happy to get a new remote ordered for you! Email- Kirstie.filosa@Dishnetwork.com. I hope this helps!
-Kirstie DISH Network

Mar 18, 2010 | DISH Network DVR-625 DTV Receiver /...

1 Answer

Got dish network cable and i cant find my ilo model IWT3206 tv remote. codes arent listed in dish network manual and i need to get my tv turned to video 2


A universal remote will work. All you have to do is hit the imput button on the universal remote. Also you can contact...
FUNAI CORPORATION
Customer Service
Tel :1-800-605-8453
http://www.funai-corp.com

You are also able to order a replacement remote thru them.

Jul 16, 2009 | iLO IWT3206 TV

2 Answers

I have a ILO-26 LCD tv and no code for my Dish Network remote


http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/remotes/TechRemo2wayCode.shtml

Jun 14, 2009 | DISH Network ViP 211 DTV Receiver

3 Answers

I lost the remote for the ilo tv and need to get it to video 2 mode in order to play ps3. I can turn the tv on and off and change channels with dish network remote but cannot get to video 2. The "input" or...


Please follow the steps below to program your remote control to equipment other then your DISH receiver:
Note: If you start this procedure and at any time and do not press a button within 20 seconds, the remote will end the procedure automatically. Simply start over again. Use the TV button for your TV, the VCR button for your VCR or DVD player. These Mode buttons are located at the top of your remote control.
1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate, then release. 
2. Press the numbers 5-0-0 on the remote control. 
3. Press the Pound (#) button on the remote. 
4. Press and hold the correct Mode button until all mode button backlights illuminate, then release. 
5. Press and release the Power button on the remote control. 
6. Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off. 
7. Press the Pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. 
8. To verify the code works try several different functions for that equipment. 
lone99star

Jan 09, 2009 | iLO 2600 Television

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Televison & Video Experts

AFcityboy

Level 1 Expert

4 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...