Question about Bosch HGS435UC Gas Kitchen Range

Open Question

LG oven stuck in demo mode

I purchased a LG oven model LB651078 from a store closing down. The lights and fan work but there is no heat. I have been told it will most likely be in demo mode as it was a display model. Anyone know how to get it out of demo mode?

Posted by on

  • andrewc554 Jan 09, 2009

    I cant see any other numbers on the oven but the oven is from Australia and the manual is on their Australian website.




    Normal
    0



     
    Unfortunately there is no information in the manual on how to get it out of demo mode. I did try calling LG but they have not got back to me yet so I was hopingsomeone out there might know the answer as I am eager to try my new oven.

  • Jyackle5
    Jyackle5 May 11, 2010

    Could not find that model on there web site for the manual. You might want to call them at.
    1-800-944-2904

    Or give me the other #s on the oven.

    I will still look around to get you the answer

×

1 Suggested Answer

SOURCE: Demo Mode

press and hold the mode button for more than five seconds. Then use the knob to scroll to "Default". This sets the stove to normal operation.

Posted on Sep 27, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Common faults with Belling 317 Range


For all Free appliance repair videos visit our VIDEO TUTORIALS 1, If the Belling fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
To gain access to the BELLING element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.



2, If your BELLING fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BELLING oven thermostat
4, A quite common and easily overlooked answer is if your BELLING oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

on Jan 17, 2010 | Belling 317 Electric Kitchen Range

Tip

Common faults with Belling 335 Range


For all Free appliance repair videos visit our VIDEO TUTORIALS 1, If the Belling fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
To gain access to the BELLING element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
2, If your BELLING fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BELLING oven thermostat
4, A quite common and easily overlooked answer is if your BELLING oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

on Jan 17, 2010 | Belling 335 Electric Kitchen Range

1 Answer

Elextrolux Range stuck in Demo Mode


Phone agents and ask for workshops. Quote them the model and problem you have.

Jun 06, 2010 | Electrolux 30" Self-Cleaning Slide-In...

1 Answer

Gas oven won't heat up but the cooktop is working.


Likely this has been since fixed but here is the solution is anyone else has this problem. I just ran into this on a brand new unit and it was because it was in a Store Demo mode. You know this because there is an "SD" then the time displayed. the repair is as follows: KILL POWER APPROX 15 SEC, ON POWER UP WITH IN 1 MIN PRESS CANCEL AND THEN PRESS OVEN LIGHT AND TOP TIMER BUTTON TOGETHER AND HOLD FOR A COUPLE SECONDS. SHOULD FIX SD CODE.

Dec 25, 2009 | Electrolux EW30GS65GS 30" Slide-in Gas...

Tip

Common faults with Belling DB3 Dual Fuel Range


For all Free appliance repair videos visit our VIDEO TUTORIALS 1, If the Belling fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
To gain access to the BELLING element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
2, If your BELLING fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BELLING oven thermostat
4, A quite common and easily overlooked answer is if your BELLING oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

on Jan 17, 2010 | Belling DB3 Dual Fuel (Electric and Gas)...

Tip

Common faults with Belling DB90 Range


For all Free appliance repair videos visit our VIDEO TUTORIALS 1, If the Belling fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
To gain access to the BELLING element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
2, If your BELLING fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BELLING oven thermostat
4, A quite common and easily overlooked answer is if your BELLING oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

on Jan 17, 2010 | Belling DB90 Electric Kitchen Range

1 Answer

Electrolux built in wall oven, lights and digital display work fine, fan works fine, but the oven will not heat regardless of the mode (broil, bake, convention roast, convection bake)


Hello stevefer
Welcome.

You said, Your Electrolux built in wall oven, lights and digital display work fine, fan works fine, but the oven will not heat regardless of the mode (broil, bake, convention roast, convection bake)

First,
1.What is the Model Number and the year of your wall oven?
2.Did the oven light up and display with any error codes?
3. Did you try to turn the breaker off for 5 minutes to see if this will reset the system?

Perhaps the heating element is failing and may need to be replaced.
I will be able to better assist you when you reply with this information.
Waiting your response.
Huuum

Oct 16, 2008 | Kitchen Ranges

1 Answer

Demo Mode


press and hold the mode button for more than five seconds. Then use the knob to scroll to "Default". This sets the stove to normal operation.

Dec 09, 2006 | Bosch HGS435UC Gas Kitchen Range

Tip

Common faults with Belling FarmHouse 932


For all Free appliance repair videos visit our VIDEO TUTORIALS
1, If the Belling fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
To gain access to the BELLING element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
2, If your BELLING fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BELLING oven thermostat
4, A quite common and easily overlooked answer is if your BELLING oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

on Jan 17, 2010 | Belling FarmHouse 932 Dual Fuel (Electric...

Not finding what you are looking for?
Bosch HGS435UC Gas Kitchen Range Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Kitchen Ranges Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Cindy Wells

Level 3 Expert

4759 Answers

yadayada
yadayada

Level 3 Expert

61203 Answers

Are you a Bosch Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...