Question about Mitsubishi WS-55511 55" Rear Projection Television

2 Answers

Convergence Issue? Turned on the TV this morning and I have shadows! The picture almost looks like what a 3-D movie looks like without the 3-D glasses on. If this isn't descriptive enough, I can e-mail you a picture. Let me know if the attached pic gives you enough detail. Thanks, Pete

Posted by on

  • 5 more comments 
  • Anonymous Feb 01, 2009

    We have the same problem. We think it might be the board.

  • Anonymous Feb 03, 2009

    on 1/29/2009 I started seeing red and green shadows beside the image on my WS_55511. I would like to know if this is a convergence issue, or something different? How do I set up the convergence if possible without hiring a professional. I can't afford it.

  • Rafael Rojas Mar 01, 2009

    it has a blue tint and a 3 d effect on #s

  • Anonymous Mar 30, 2009

    I have the same problem. It looks like you are watching a Three-D movie. Is it an easy fix or should I just get a new TV.

    bfitz34

  • bfitz34 Mar 30, 2009

    I have the same problem, I was watching TV and it looks like a Three-D movie. Is this an easy fix or should I just get a new TV.

  • Tom Fillmore
    Tom Fillmore Apr 07, 2009

    My Mitsubishi ws-55511 had the 3d effect with a convex bow on top and concave bow on the bottom. I replaced the convergence IC (stk393-110) thinking that was the problem, but after the installation of the new IC the picture looks the same. Does anyone know what else causes this convergence issue? Maybe I got a bad IC? I'll keep searching, but thanks in advance.

  • Anonymous Apr 21, 2009

    I am also having the same problem with a wavy red arch across the screen and picture that looks like a 3d without the glasses. We just spent $500 to have another problem repaired in january and have been told that this would likely cost at leasrt another $400. We paid $3500 for the HD version of thiis TV and are very disappointed. We've only had it 5 years and wonder if we shoul have it repaired or not. Comments please...

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 62 Answers

After I did not fix the convergence issue I read on another forum that someone else who also did the IC replacement on the ws-55511 also had it turned out worse. But after having a co-worker look over his work to fix a couple connections he took it home and turned it on and everything was perfect again.
I took the board out and began to hook up every connection examining each with a close eye. As I was connecting the two boards I saw that one of the 2 white 19pin connectors on the left had a pin which was not making a connection.
After I fixed that pin and hooked everything else back up, the tv was back to normal.

Posted on Apr 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem but not as bad. I went to the menu, then settings. Tried the factory convergence reset first but that didn't work. Under convergence I selected the red option and got a screen with a plus sign. Press the AUDIO button and lines will cover your tv screen. It might take a while but you can try to fix the convergence at many points now. Select the area you want to correct by pushing the ENTER button, then up,down,left,right until its better and ENTER button again. Keep doing that to all areas. Once done with red, push VIDEO button and blue convergence will come up. Also INFO button helps explain a little. After I did this my picture improved a lot. My tv wasn't as bad as yours, but I hope this works.

Posted on Mar 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am getting a blurry picture that kinda makes it look like a 3d movie without the glasses on with alot of blue


The tv have a problems known as a convergence pictures problems.Tv have any colors lines R,G,B mis alignments,tv have any colors shadows pictures or have a 3D pictures look alike?Yes,than the tv convergence board it is the causes and already dead to have many of these convergence pictures problems.The tv convergence board must have to be repair like replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence pictures many problems.The tvs shops will cost u like $300-$350 for parts and labors.

Sep 07, 2011 | Panasonic Televison & Video

1 Answer

I turned My tv on and the top of the screen has red, green, and blue swirl lines, and the rest of it looks like watching a 3D movie without glasses, and the picture looks as if you took out the screen and...


The tv have a problems known as a convergence pictures problems,it is dead.Tv have any colors lines R,G,B mis alignments,have colors shadows pictures or pictures look like 3D?Yes,than the tv convergence board it is dead.The tv convergence board must have it components parts replaced like 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence pictures problems.The tvs shops will cost u like $300-$350 for parts and labors.

Aug 11, 2011 | RCA D52W19 52" Rear Projection Television

1 Answer

Have a Mitsubishi WS 55313 rear proj TV. Has been used maybe 30 hours in all. TV sat for a few years unused. Passed TV to my daughter. Once TV was reconnected at her house, she watched it in all its...


All old DLP tvs have a common design flaw,any time this could happen during the tv existing life,the tv problems is call a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board is dead,the board have dead 2 STK convergence ICS and some or all of it resistors too.This parts on the tv convergence board,must me replaced,to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Dec 13, 2010 | Mitsubishi WS-48313 48" Rear Projection...

2 Answers

Looks like i'm watching a 3 D movie 55"


Tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or a 3D pictures look alike?The tv have a dead convergence board.The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors are too.These parts,must be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Dec 04, 2010 | Samsung HCM5525W 55" Rear Projection...

1 Answer

I left my 60 inch rear projection mitsubishi HD 1080 on overnight as I fell asleep in front of it for about 5 hours (11pm - 4am). This morning when I turned it on the picture is doing a fisheye effect on...


Hi,
It sounds your Mitsubishi rear projection tv got problem with convergence output chips failure, I'm not aware about model number of this tv so unable to provide you specific info however, it is hardware failure and few parts need to be replaced by tv repairman.
Convergence output chips make align picture on front screen and if they stop working, you will see 3D look or bowed picture with different colors.
Contact local tv repair shop to fix this issue in tv.
Thanks.

Nov 17, 2010 | Televison & Video

1 Answer

Picture now has alot of yellow and blue shadowing


Ur tv have convergence problems,it dead.Require 2 STK convergence ICS and some or all it resistors replaced on the convergence board.The shop will cost u $300-350 for parts and labors.

May 14, 2010 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

My sony 57 inch rear projection Tv HD has shadow problems. It was good when we turned it off at the night but when we truned it on in the morning it had blue, green shadows around the picture and the...


Convergence is dead.Must know how to solders?Must replaced 2 STK convergence ICS and some or all it resistors.Tries Websites Tv repair World.com,Tvrepairkits.com to buy a converence kit to repair it urself.The shop will cost u $300 for parts and labors.

Mar 22, 2010 | Sony KP-51HW40 51" Rear Projection...

1 Answer

I have a HCN4727w samsung. Red/green shadowing. Bowed image


Projection sets have two very common problems.

The first common problem is convergence

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped or bowed
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 17, 2010 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Convergence Issue?


1 read the manual,2 look under convergance,3 follow the instructions.if you can not do 1,2 or
find a hetrosexualman that can read and make him dinner.If you do not have a manual look up the manufacture and you will be able to down load one for free.

Jan 18, 2009 | Mitsubishi WS-55807 TV

1 Answer

Looks like watching 3D movie(colors) and rounded


This is a convergence problem and is either bad connections on the convergence ICs or defective ICs. If you feel that you can solder, you should be able to repair this yourself. First try resoldering the pins on the convergence ICs. If that fails, replace the ICs. These ICs are large black ICs attached to a heatsink and should be marked STKxxx.
Keep us posted.
Dan

May 13, 2008 | Toshiba 57HDX82 57" Rear Projection HDTV

Not finding what you are looking for?
Mitsubishi WS-55511 55" Rear Projection Television Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1208 Answers

The Knight
The Knight

Level 3 Expert

73451 Answers

Jaime Hernandez

Level 3 Expert

2311 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...