I didn't get into BIOS of My compaq armada 1750.it's really quiet. It found the found 'key"

Hi, u can get access to user guide from: http://www.manualowl.com/m/Compaq/Armada-1750/Manual/106560

Restart your computer During the boot process you will see on the screen to press a certain key to enter setup usually the Delete or F2 key this will vary depending on your computer and operating system Press and hold that key during the boot up process to enter BIOS using the arrow keys load failsafe defaults or load optimized defaults press escape then press f10 to save to cmos to restart
If this fails you might try some of these Acer: - Ctrl+Alt+Esc

ALR PC: (F2) or (Ctrl)(Alt)Esc)

AMI BIOS: (Del), (F1) or (F2)

AST, Advantage, Award, Tandon: - Ctrl + Alt + Esc

Award BIOS: (Del) or (Ctrl)(Alt)(Esc)

probably the inverter has gone inside the screen and will need replacing it is located in between the two hinges beneath the plastic trim

look online at HP's website.

make sure you update the video drive.

Tap the F8 Key as soon as the Laptop is powered on, keep tapping it till it brings you to Boot Choice Menu Options.. Options such as: Safe Mode, Safe Mode w/ Networking, Last Known Good Config..etc... are listed here..

Press and hold the F12 Key If You Need To Get To Boot Choices.. Such As Boot From CDrom, Boot From LAN, Boot From USB Device..

RESTART:
PRESS F8 AFTER RESTART:
CHOOSE: SAFE MOOD:
AFTER THAT MAKE SYSTEM RESTORE FOLLOW THIS INSTRUCTION:
http://laptop-driver.blogspot.com/2008/09/system-restore.html

IF NOT WORKIN AFTER PRESS F8.
RESTART AND PRESS F2,
YOU SHOULD ENTER THE BIOS(BLUE SCREEN)
THIS IS TO TEST IF F2 WORK MEAN YOU WINDOWS XP/VISTA CORRUPT.
YOU NEED TO REPAIR OR FORMAT IT.
(IF YOU KNOW HOW TO REPAIR WINDOWS JUST DO IT OTHERWISE IF YOU NOT REALLY WANT TO KNOW JUST FIND SOMEONE WHO COULD DO THAT.
JUST SHARING =)

Some Compaq's actually have a partition on the hard drive for the BIOS. If someone
> used FDISK to remove the partition, then you won't be able to get into the BIOS
>without either re-creating the partition or by booting from a floppy with the setup
>utility on it. One of Compaq's disks will re-create the partition, but of course,
>will blow away all the data on your hard drive.
>
>I had to download two programs from Compaq:
>1) PC Diagnotics
>2) Setup for Portables
>
>I got them from the Drivers section of Compaq's site.
>
>This was one of the files, it is for an Armada 1750, so it probably won't work if
>you have a different machine, but will give you an idea of what to look for:
> www.compaq.com/support/files/armada/us/download/8093.html

On the 1750 the setup bios settings are held on the hard drive, if you cant get any further I would suggest the drive is dead.

When the system starts, hold the F10 key and go into BIOS and set CD Rom as 1st Boot device (in Boot Order). Because most Compaq's would put the BIOS in a hidden NON-DOS partition on the hard drive, you may have to get an OEM recovery disk for that model. Because there is no BIOS to go to, the machine doesn't know it has a CD, HD or Floppy to go to. A boot floppy/CD is no help. Alternative 1: With another desktop and IDE to Laptop HD connector, FDISK (make active partition and hidden partition [5mb]), Format both, copy the cabs from WinME CD to c:\windows\options. Alternative 2: Find the COMPAQ OEM CD for that model. Since there was no exact model number Click here Please indicate whether this is helpful or not.