Question about Dynex Enhanced-G Wireless Broadband Router

1 Answer

Installing wireless g router on macs

Can some one give me step by step instructions on installing on mac.
I seem to be unable to follow the maual. Do you connect differently than if you use the cd to set up on its own. I am so confused

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,338 Answers

Router setup
You do not have to use the cd.
Shutdown your Mac. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your Mac. The Mac should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider.


After you get the Internet to work via the Lan (wired to the Mac) you can disconnect the network cable and use the Aiport to go wireless.

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When MAC filtering on Encore enhwi n2, the message " the legal characters are 0-9, A-F or a-f" always appear when I try to add more MAC address to be allowed to access the router. What could be...


The MAC address is a 12 digit number. This number is organized into 6 pairs of Hex numbers with no spaces between each pair of Hex numbers.
A Hex number is 0 to 9 and A to F giving a range 16 possible numbers.
An example of a MAC address number is - 0000AFB9C3F9

When you configure the wireless router with MAC address filtering, the router will only allow the computers with the MAC address listed in the router to connect to this wireless router.

Aug 22, 2011 | Encore ENHWI-N2 802.11n Wireless Router...

1 Answer

I am using a macbook air 11inch. no cd rom hence could not run the cd installer. I copied the files to a usb flash drive but am unable to install using that. please advise what steps to take.


you can still connect you mac to your linksys even without a driver.

your MAC have a button that say ASSIST ME on the set-up screen for the wireless connection.
ASSIST ME button will be the one going to show you how to properly connect your MAC to your router.

Apr 09, 2011 | Linksys WRT120N Router

1 Answer

Does anyone know how to Do MAC address filtering on Thomson TG782T router?


1st. Have a look at the wireless card that is inserted in your computer, check the label it, will have the MAC address printed on the label. If the wireless card is inside the laptop then have a look at the properties of the wireless card - it should give the MAC address of the wireless card.

2nd. Connect a LAN cable to the wireless router and enter the router's configuration URL address and go to the wireless configuration - then click on MAC address filtering and enter the MAC address of the wireless card.

The router will only allow the MAC addresses that are in this table to connect to the router.

For further information on securing your wireless network, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Jun 16, 2010 | Computers & Internet

1 Answer

N F5D8633au cannot be detected by macs


Hi Friend,
You have to connect to your network in the MAC Computers,Please follow the below steps

Step 1: On your Top Right Hand of your MAC Computers,click on the Airport (Wireless Symbol)

Step 2:Now Check whether you are able to see the Network Name,try to click on it

Step 3: If you have enabled Security please type the Password and Connect

Note:If Your password is WEP (if it contains only number please type a $ and then the password),if its WPA(Combination of both number and Alphabets then type only the password)

If you have any Clarification please feel free to contact us

Regards,
Aysaam

Apr 13, 2010 | Belkin N Wireless Modem-Router F5D8633au4A

1 Answer

Unable to connect my mac to d link worked ok until new modem was installed now will not connect mac computer sends a message you are not connected to the internet. have tried rebooting the...


Make sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

Jan 29, 2010 | D-Link DIR-615 Wireless Router

1 Answer

Symbol MC9090 unable to connect to wireless network...


check in your router MAC security
if in your router MAC security is enabled then only those can connect whose MAC addresses are in allow list in router.

you can access your router with following link

http://192.168.1.1
or
http://192.168.1.0

for belkin router
http://192.168.2.1

type user name as "admin" and password as "admin" or blank or "password

then go to wireless advanced security then check MAC security if enabled then add your moto MAC in allow list.
Let me know .

Jul 29, 2009 | Symbol Motorola MC9090 Mobile Computer

1 Answer

I have two Dell 2350 Wireless Routers trying to bridge or repeat


The first router must the root AP and the second should be set to Wireless Repeater. Follow the steps on how to resolve this setup.

1. Get the Wireless MAC Address of the main router. The router has two MAC addresses, one is wired and 1 is wireless. To determine the wireless MAC address, go to Status page of the router, there's a sub tab there for wireless and you'll see the Wireless MAC Address. Take note of it.

2. Access the setup page of the 2nd router. Change the LAN IP address to 192.168.0.2 then save. Power cycle it by just turning it off for 10 seconds then turn it back on. You can now change it to Wireless Repeater and there's an option for you to type the Wireless MAC address of the main AP. Make sure all wireless settings are the same on both routers like SSID, Channel and Encryption Key. Save your changes after that.

3. From your computer, try to ping the 2nd AP which is 192.168.0.2. If it replied back, you're all set.

Good Luck!

Jul 25, 2009 | Computers & Internet

5 Answers

Lost Install CD for F5D7230-4 Wireless Router


for setting up your belkin router i would say you don;t need any CD . just follow the steps Mention on this blog How to Setup Belkin router Install Belkin Wireless router mac or windows all steps are there that will help you to setup belkin router

Nov 01, 2007 | Belkin (F5D7230-4) Router (587009)

1 Answer

No Internet With New Router, Computer, or Adapter


This document is relevant if you had an Internet connection, but lost it when: * Adding a router to your network, or * Using a different Ethernet adapter card or computer than the one your ISP used during installation. Use ISP Configuration to see whether you need to "spoof a MAC address" to connect to your ISP. If so, follow the instructions in this document. If the Ethernet card that was used during ISP installation is not available, you may need to register the new Ethernet card's MAC address with your ISP for the following to work. MAC address stands for Media Access Control address (not "Macintosh computer"!), a unique number built into modems, routers and other network hardware. It ensures that one piece of equipment is not mistaken for another one. Some ISPs validate your connection by checking the MAC address of the Ethernet adapter in computer that was registered during ISP installation. If you add a router or change computer or Ethernet adapter, these ISPs will drop your Internet connection, because they find the MAC address of the newly added router or adapter, instead of the one they expect. To fix this, change the router to report the Ethernet adapter's MAC, instead of its own. This is called "spoofing the MAC address". To find a PC's or Macintosh's MAC address, see How to Find an Adapter's MAC address : http://www.fixya.com/ThreadView.aspx?prdid=252225&thid=102075. To Spoof a MAC Address 1. Connect the computer that your ISP's installers used to establish Internet connection to the router. If you are unsure which computer was used, call your ISP, and ask what MAC address was registered. Then, using the instructions in the box below find the computer whose MAC address matches their records. 2. Disconnect other computers from the router. (If you do not want to disconnect other computers, you need to know the adapter's MAC address, as described in the box below. Then, in step 6, type Use This MAC Address, entering the adapter's address.) 3. In an Internet browser type the address 192.168.0.1. 4. Type admin for the username, password for the password, and click OK. 5. Go to the Basic Settings > Router Mac Address. 6. Select Use Computer MAC Address. 7. Click Apply. This automatically gives the router the computer's MAC address. 8. Click Test to make sure you are connected. If you are not connected, contact your ISP.

Feb 19, 2006 | NetGear CG814M Wireless Cable Modem...

1 Answer

How do I find the MAC address of my wireless router?


The MAC address is listed on the label located on the bottom of the router, below the serial number. The LAN/Wireless and WAN MAC address can be obtained by logging into the web-based configuration of the wireless router. Follow the steps below for this method. Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK. Step 3 Click the Status tab and then click Device Info to the left. This page will list the WAN, LAN, and Wireless MAC address.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

Not finding what you are looking for?
Dynex Enhanced-G Wireless Broadband Router Logo

Related Topics:

700 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

micky dee

Level 3 Expert

2642 Answers

Are you a Dynex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...