Question about Panasonic DMR-E75V DVD Player/VCR

Open Question

Model No DMR-E75V Remote locked up

Remote setting on incorrect remote code "3 CHK REMOTE". Can't access menu to set to correct code. Tried unplugging unit from power and cable for as long as 24 hrs, but unit won't reset to factory defaults. Never even actually changed the setting, but lock was immediate.

Posted by on

  • info63 Jan 15, 2009

    Same problem here. While I don't know, I suspect my issue is related to my recent subscription to Comcast. Now, I have a new remote from Comcast that operates both my TV and Comcast DVR box. Today, I also successfully recorded a program I wanted on DVD. So, I used my Panasonic DMR-E75V as I had so many times prior to my Comcast subscription. But, I can't finalize the disk. I keep getting the "3 CHK REMOTE" in the LCD display of my Panasonic DMR-E75V.

  • Dgrizzly Jan 22, 2009

    I contacted Panasonic. Here's what they told me and it solved my problem:

    Try this reset to get the remote control to work on the unit again. Press and hold down the number 3 button and the ENTER button on the remote control at the same time for 5 seconds. Do this while pointing the remote control at the DVD recorder and it should correct the problem.

×

6 Suggested Answers

SOURCE: DMR-E80H Remote stopped working

There is a section in the manual about resetting the remote. It is a simple fix You can go to the manuals on Panasonic.com to find the methods of the madness

Posted on Aug 12, 2007

  • 1 Answer

SOURCE: DMR-ES30V remote and DVD panel buttons not responding

I assume you have fixed this by now, but if not, call panasonic's help line (number is in your owner's manual). They will walk you through the complete reset process (maybe 5 minutes). you will have to re-program everything the same as you did when it first came out of the box, but that doesn't take too long. Also, first try taking the batteries out of the remote. Make sure they are still good. Wait 60 seconds or longer, then replace batteries.

Posted on Jan 03, 2008

  • 1 Answer

SOURCE: Panasonic DMR-E75V DVD - How to use??

Can anyone help me find a manual for this item please?

Posted on Mar 18, 2008

  • 236 Answers

SOURCE: what cords do you need

hook to a what? direct to your TV or to an audio/video amp? That depends on what is available in your DVD/VCR or toy our TV. simple cnnection is just the composite video signal colored yellow RCA connector. Video out of your DVD/VCD to Video input of your TV. Another option maybe if it has which is better is S-Video output of DVD to S-Video input TV. if you;re doing it via audio/video amp, then simply look for the input source and connect your video there. The audio... it's also RCD connectors colored Red/White for your right/left channels. it will always be like that for a stereo amp setup. but if you are using audio.video amp with sound preocessing then you'll have more audio connections at least 5, mains left/right, surround channels left/right, your center speaker, your subwoofer.

Posted on Apr 07, 2008

nandosnut
  • 112 Answers

SOURCE: Remote Problems

Press and hold both the ENTER and number 3 buttons at the same time for at least two seconds and, Hey Presto!, you have regained full control of your unit!

Enjoy!

Posted on Apr 20, 2009

jyackle5
  • 8197 Answers

SOURCE: need a user manual for a Panasonic dmr e75v dvd

You can get the manual on link below.

http://service.us.panasonic.com/OPERMANPDF/DMRE75V.PDF

Good Luck

Posted on Nov 13, 2009

Testimonial: "Yeah, thanks a heap ,the net a jungle!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My DMR-EH50 is stuck in SP mode and when I hit the button on the remote it keeps displaying CHK REMOTE 3. Would you know what is causing this. I cannot get the unit to do anything at all.


Very easy fix.

Your DVD recorder can be set up to accept remote contol signals on any one of three channels. Remote 1, Remote 2 or Remote 3.

Your remote can be set up to send signals on any of these channels. You need to make sure your recorder and remote are set to the same channel.

Your recorder is telling you that it is set to receive remote control signals on channel 3. This means your remote control is currently set for a different channel.

Assuming that you have a genuine Panasonic remote, do the following,

On your remote press the "Enter" button and hold it down. Then press the "3" button at the same time for two seconds, then release both. This will change your remote so it sends signals on Channel 3 which will match your recorder.

Those clever people at Panasonic realise that you will be delighted with their products and will probably have several of their appliances in use. The different channels avoids switching all your Panasonic gadgets at the same time. Clever huh?

Best wishes

Aug 24, 2010 | Panasonic DMR-E50 DVD Recorder

1 Answer

Panasonic DMR-EZ485V. Remote stopped working when


Panasonic website under FAQs. Using code shown on dvd readout,
such as RC2, press 2 & enter or ok, hold for 2 seconds, and machine
will reset connection between remote & dvd recorder. So stupidly simple it works.

Feb 15, 2010 | Panasonic DMR-EZ485VK DVD Recorder/VCR

1 Answer

Panasonic DMR-ES45V - DVD recorder / VCR combo Remote not workin


My remote is not working. When I press a button, I get the following message on my unit: U12, U30, SET #, CHK REMOTE #, or RC #. What can I do to fix this? The message displayed means that the remote control and unit are not communicating and the remote needs to be programmed. To program the remote, press and hold the same number that is displaying on the unit and the [ENTER] or [OK] button for more than 2 seconds. For example, if the unit displays “SET 2”, press and hold [2] and [ENTER] or [OK] for more than 2 seconds.

Jun 04, 2009 | Panasonic DMR-ES46VS DVD Recorder/VCR

1 Answer

Universal Remote says ''RC2'' for DMR-EZ27


Question (s): The remote control for my DVD recorder has stopped working. Every time I press a button, the display says "CHK REMOTE 1", "RC1" or "SET1". What is wrong? Answer/Comments: Your DVD recorder remote control can be programmed (with different codes), so it can be used with multiple Panasonic DVD players. When you press a button and the display shows [CHK REMOTE #] or [RC#] or [SET#] it means that the DVD recorder and the remote control are not set to the same code.To set the remote control code to that of the DVD recorder, press and hold [ENTER] as well as the corresponding code number on the display (1, 2 or 3) at the same time for more than 2 seconds.

Mar 14, 2009 | Panasonic DMR-EZ27K

2 Answers

Panasonic DMR-85H remote non-responsive


FIX YA IS NOT PAYING US THE MONEY WE EARNED (MOST OF US)! AND A SUIT IS BEING FILED WITH THE DISTRICT ATTORNEYS OFFICE! I SUGGEST YOU GO TO ANOTHER SITE TO GET YOUR ANSWERS!

Feb 15, 2009 | Panasonic DMR-E85H DVD Recorder

2 Answers

Remote control doesnt work


Go to the manu and try new remote code, Hopefully by changing remote code, from Codeset 2, to code set 1
will solve your problem.

Jan 17, 2009 | Panasonic DMR-HS2 DVD Recorder

2 Answers

Panasonic DMR E80H Video recorder remote


While pressing [ENTER] on the remote control press the [1] button on the remote - that should change the remote's control code back to one.

Jul 28, 2008 | Panasonic DMR-E80H DVD Recorder

1 Answer

DVD recorder DMR EZ27EB


The remote control code is wrong. Change to the correct code. The batteries are depleted. Replace them with new ones. Point the remote control at the remote control sensor on the main unit. Remove obstacles between the remote ccontrol and the main unit. Remove dust from the transmission window and the unit's sensor. Colored glass may obstruct the signal reception/transmission. Don't place the signal sensor in direct sunlight or in areas that be subject to sun exposure. It may be necessary to set the code on the remote control again after changing the batteries. It may be necessary to set the manufacture code again after changing the batteries.
I hope this info can be of some help to you. Ms Tanya 2/12/08 4:02AM CST.

Jan 29, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

6 Answers

Dvd recorder remote control


Anytime your unit displays RC1, 2, or 3 - the remote code needs to be reset. Other messages are "chk remote n" or "set n", n being the number 1, 2 or 3. These remote codes are set in case you have multiple products that interact w/ the remote - so when operating one device the other doesn't interfere. Unfortunately, every now and then for completely unknown reasons, they can slip out of the proper code. All you have to do (if your remote is, in fact, functional) is press and hold the number on the remote that corresponds with that which displays on the unit - in your case the number 3, and hold the Enter key at the same time for about 5 to 10 seconds. This should resume operation shortly thereafter. However, you will not see any confirmation on the display as you are performing this reset. It is trial and error.

Jan 28, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Remote not connecting


If you still have the original remote for the DMR-E80H, you can switch it back to operate with "1 CHK REMOTE" codes by holding down the "Enter" button on the remote and then press the "1" key.

If you don't still have the original remote, you can try the same steps on your universal remote (assuming it also has an "enter" key that worked with your recorder) and it could work.

Oct 02, 2007 | Panasonic DMR-E80H DVD Recorder

Not finding what you are looking for?
Panasonic DMR-E75V DVD Player/VCR Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic DVD & Blu-Ray Players Experts

 Grubhead
Grubhead

Level 3 Expert

4593 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Panasonic DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...