Question about Dyna-Glo RMC-8001SS Heater

1 Answer

I have a dyna glo heater model # rmc-55-r7 i just bought 2 of them less then 3 weeks ago and ive already burnt up the wicks i dont know why

Posted by on

  • Anonymous Feb 05, 2009

    When the heater was new, it worked perfect. Now, the flame is getting lower and lower until it becomes unusable ! We have only used the heater 5-6 times !

  • Anonymous Feb 06, 2009

    I just bought a dyna-glo and even in a well ventalated the fumes are unbearable. I changsd the wick and bought new fuel,I'm afraid to use it.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Do not use the RED fuel !! use the clear!! now clean the top of the wick of the hard stuff and run agane.

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I just replaced the wick, cleaned up the heater and filled with new K-1 kero. The heater (Dyna-Glo RMC-95-C7) is emitting black smoke worst than ever. The wick is burning a little unevenly.


Either the wick was improperly installed or you may not have allowed enough time for the wick to soak in the kerosene and become evenly distributed. Check the placement of the new wick and allow time (several hours) for the wick to absorb the kerosene.

Jan 31, 2011 | Dyna-Glo RMC-8001SS Heater

1 Answer

I have a dyna-glo portable kerosene heater model RMC-55-R7 just replaced the wick an left wick soak up kerosene for an hour, heater lite fine, but when i hit the extinguishing button heater want go out...


When you hit the extinguish button the wick should drop down so that you can only see just the top of it or maybe none of it. Check the position of the wick. It could be binding up so that it will not go into the lower position. If it isn't you will have to figure out why.

Nov 07, 2010 | Heating & Cooling

1 Answer

Have a Dyna Glo RMC-95-C2 and I can't get it to lite.


You have to change the batteries.. the manufacturer shipped it with **** batteries.

also take it apart.. very simple and clean out any soot..

Soot will cause heavy smoking...

The wick should last more than a year ....

Dec 14, 2009 | Dyna-Glo RMC-8001SS Heater

1 Answer

I need to buy a replacement wick


You can get them at Lowes for less then $10.00 Number DH-145

Dec 23, 2008 | Dyna-Glo RMC-8001SS Heater

1 Answer

Dyna-glo kerosene heater (rmc-55-r7 )


wicks won't light for usually one of 2 reasons. water in the kerosene, which means a new wick and new fuel. or build-up on the wick. check to see if the wick is hard. your wick should be soft. burning out the heater until all fuel is used either by running down all the fuel in the unit or removing the fuel can and lighting to burn off all fuel in the bottom will prevent the wick from getting hard.

Mar 09, 2008 | Heating & Cooling

4 Answers

Can not replace wick in dyna glo serial number RMC-95-C2


As "guest" reported, the wick replacement for RMC95 series is the same as his posting for the DH2301.
After calling my local Tractor Supply and searching the net, I had it but it ain't easy. My sleeve doesn't come out necessitating cranking the knob up (wick will be level with the top) find the three holes (more like two are slot and one is a hole) then where the diagonal grooves are, there is ANOTHER HOLE which you must snap the pin in both of those all at once!
The good news is, you get one in, the rest are cake. I was pretty frustrated so I hope this helps others.

Dec 08, 2007 | Dyna-Glo RMC-8001SS Heater

1 Answer

Dyna-glo glass globe


go to this site they have mica windows and accessories for your heater:
http://www.milesstair.com/accessories.html

Nov 27, 2007 | Heating & Cooling

Not finding what you are looking for?
Dyna-Glo RMC-8001SS Heater Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyna-Glo Heating & Cooling Experts

paulcarew

Level 3 Expert

2364 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

drifterray

Level 1 Expert

10 Answers

Are you a Dyna-Glo Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...