- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Enter service mode (Function, Original Size "Ledger", 3) simultaneously. F1 will then show on display, press 7 then Start key, F7 mode will then be diplayed. 01 is the key operater id code and will show current id code. Touch 01, sreen will then let you make changes, select change and input your 4 digit code then select ok. Your finished, exit service mode.
First off you need to make sure that the AR-M350 has a network port on the back of it (next to the parallel port). This model did not come with a NIC only the AR-M350N models did. If it does have a NIC port then you only need to plug in a patch cable to your network jack. As long as the machine is set to DHCP it will find an IP after you restart the copier. To configure a manual IP address you log in as key operator under system settings then navigate to Printer Settings - Network Settings.
First you need to know the key operator code, you can display it by pressing [C][INTERUPT] [0/ZERO][INTERUPT][START][START] then the display will shows you the 5 digits key operator.
After you know the key operator code, you can go to User program, this is done by pressing [C][INTERUPT] [C] then input the key operator code, when entry is complete "P" will appear in the quantity display. Input 19 then START, input the new code and press START. To exit user program press CA
Make sure the copier is in "copy" mode.
To get into service mode press the following keys one after the other "P" key - "interupt" key - "clear" key - "interupt" key (do not play around with setting in service mode as this can render your copier useless)
enter 22 and press "start" enter "7" and press start. This should display the admin code.
Restart the copier and you should be good to go.