Question about Panasonic RC-6299 Clock Radio

Open Question

I can't set the clock, date, temp on Sharper Image model S 1585?

My Sharper Image CD/Radio/Alarm clock w/sound soother plays. I can't seem to set the clock, the date ther temperature or the alarm. Can you help me?

Posted by on

6 Suggested Answers

Noggin
  • 944 Answers

SOURCE: Sharper Image GT113 Beetle Clock radio

Sorry, no luck with a manual for the GT113, here is the link for the manual for it's replacement, the GT806; http://www.sharperimage.com/us/en/catalog/productdetails/sku__GT806 Check page 16 - hopefully the process is the same on your model for the alarm - other features are definitely different. Please ask again if this doesn't work. Hope this helps :)

Posted on Jul 15, 2007

skipper360
  • 58 Answers

SOURCE: I get no sound at all

Make sure put volume on it unmute the sound. Possiblities: 1. You have a blown speakers 2. You have a power problem going into your unit. The clock display power is separated on that unit so its seem ok. You need to check the fuse and the continuity of the cord, but todo so u need to open that unit to access the module. Hope this may help you. pls rate me.

Posted on Aug 13, 2007

  • 77 Answers

SOURCE: CD500 Clock Radio Problem

there is a button that says alarm hold it down as well as the minute and hour buttons to set the alarm you must hold down the alarm button and only use min or hour not both at once

Posted on Feb 26, 2008

  • 1 Answer

SOURCE: clock settings

panasonic fm-am clock radio rc 6088/2 - alarm

Posted on Mar 03, 2008

SOURCE: Sharper Image Projection US Atomic Alarm Clock (model number OQ311)

Hi!  I have the manual! ... I will try to scan in the whole manual, but for now:
Setting Alarms:
1) Press and hold ALM1 or ALM2 for two seconds until the alarm time flashes. 2) Press ALM1/HOUR to advance the hour and ALM2/MIN to advance the minute.  The time will display "PM" if set to PM and nothing if set to AM 3) Clock will revert to normal operation when no buttons are pressed for 15 seconds.  The alarm is now set and activated.

Posted on Jul 31, 2008

  • 1 Answer

SOURCE: SHARPER IMAGE S1785 alarm BUZZ to SOOTHER sound

Johnny, push "mode" once. The alarm symbol blinks. It is also displaying the alarm mode. Pushing "display" changes the alarm source. Bill

Posted on Oct 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you have a manual for a sharper image cd clock radio with sound soother model number s1586blk


sorry no we do not but you can search for one on Google and download it if you find one .

Jun 26, 2015 | Sharper Image Clock Radios

1 Answer

Fried, not destroyed


The old Sharper Image went bankrupt several years ago. The new Sharper Image does not provide support for old Sharper Image products. You might be able to find a similar product available from the new Sharper Image.

Dec 10, 2013 | Sharper Image SI785 Clock Radio

1 Answer

How do I change radio volume on the alarm?


This clock is supposed to have an automatically "increasing" volume feature (starts off low, gets louder over a minute or so).

If not sufficient, look on the top right side of the clock, there should be an up/down volume control. It is a black oval-shaped button with a picture of a sound speaker in the middle. Push it upward to increase volume and downward to decrease volume. Unfortunately, you have to have a flashlight or light on to see it because none of the controls are illuminated.

Dec 02, 2013 | Sharper Image Sound Soother White Noise...

1 Answer

Replacement Power Supply AC Adapter Sharper Image SI601 S1601 51601 Travel Sound Soother 20 with LCD Alarm Clock your problem?


I also am looking for a replacement power AC adapter cord for a Sharper Image SI601. I tried a radio shack replacement, and it works about 50% of the time.

Thanks!
Chris

Aug 07, 2012 | Sharper Image Travel Soother 20 Clock...

1 Answer

Set clock, date, alarm on SI686 CD/ Radio / Alarm Clock with Sound Soother


Can you clarify what you need help with? To SET THE CLOCK push the "Mode" button twice. (The current time setting flashes on the display) Once it is flashing, Decrease the hours by pressing "1" Increase hours by pressing "2" Decrease minutes by pressing "3" and increase minutes by pressing "4". If no additional buttons are pressed the time will reset in about 10 seconds and the display will stop blinking.

TO SET THE DATE press the "mode" button 4 times. The current date setting will flash on the display. Decrease the date by pressing 3. Increase the date by pressing 4.

Decrease months by pressing 1. Increase the months by pressing 2. The date will reset in about 10 seconds when you stop pushing the buttons.

TO SET THE ALARM Press the "mode "button once. The display will begin to flash. Change the hours by pressing either 1 (increase) or 2 (decrease). To change the minutes, press 3 or 4. 3 decreases the minutes and 4 increases the minutes. Once you have the time reset, leave the unit alone for about 10 seconds. the display will stop blinking indicating the time has been reset.

TO ACTIVATE THE ALARM push the round button on the far right. You will see the alarm icon come on or off on the LCD display on the right side. Be sure you have set the AM or PM time correctly on the alarm time. It helps to recheck this now as I have made this mistake several times.

If you get stuck on military time and want the 12 hour clock the answer is posted on this site, as well.

Hope this helps.

Dec 25, 2010 | Sharper Image SI686 Clock Radio

2 Answers

Radio only plays for 1/2 second and then turns off.


Nevermind! My problem was fixed, I'm embarrassed to say, with new batteries. I had been told that the batteries in the radio were new when in fact they weren't. Thanks anyway.

-hwell97

May 17, 2009 | Sharper Image Travel Soother 20 Clock...

1 Answer

SHARPER IMAGE S1785 alarm BUZZ to SOOTHER sound


Johnny, push "mode" once. The alarm symbol blinks. It is also displaying the alarm mode. Pushing "display" changes the alarm source. Bill

Sep 03, 2008 | Sharper Image SI785 Clock Radio

1 Answer

SI686


To activate the sound soother press the round button on the bottom left of the unit marked soother. To change the Soother stations press the "Tuner buttons either left or right. The tuner buttons are located on the bottom half of the unit above the volume buttons. one click of the tuner button moves one station on the sound soother selection.

Jul 06, 2008 | Sharper Image SI686 Clock Radio

1 Answer

How to work / setBuch radio alarmclock


I just found my manual for the Sharper Image SI785 CD/Radio Alarm Clock with Sound Soother. Had misplaced it for quite a while. Am not saavy enough to know how to post it online, but if anyone needs one, just email back your address and I'll be happy to send it. I remember how frustrating it has been trying to program/reprogram one without it. Looking forward now to knowing how to use this thing :)

Jun 07, 2008 | Clock Radios

2 Answers

LOST USER GUIDE


I can't set the alarm

Jan 11, 2008 | Clock Radios

Not finding what you are looking for?
Panasonic RC-6299 Clock Radio Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Clock Radios Experts

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2124 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Lawrence Oravetz

Level 3 Expert

7686 Answers

Are you a Panasonic Clock Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...