Question about Philips Magnavox 27MS343S 27" TV

Open Question

Getting into the menu

I picked up a nice 26 inch. Philips. The person got it from a sale, from a motel. The sound does not go all the way up and I can not get into the menu, with a after market remote. Would like to be able to turn up the TV more than what it does...
Can you help. thank you, Dave at davidwellfl@yahoo.com
Philips, mod. #:: PC0125 C121

Posted by on

  • burnies911 Feb 02, 2009

    I have a magnavox bought from a motel and I have the same issue. the sound will only go about 3/4 and no menu access.

×

5 Suggested Answers

  • 556 Answers

SOURCE: PHILIPS TV 32PT6441/37 SHUT DOWN

it might be due to

  • plug or socket loose where tv is connected.
  • loose connection in switch.
  • some connector loose in power supply
  •  switching transistor in power supply &horizontal section loose or wire open
  • some capacitor loose in oscilltor section in power supply.
  • if you are not tech. person please take help.
  • hope this will help
  • good luck

Posted on Oct 17, 2007

  • 1 Answer

SOURCE: philips 28pw6615/5 tv

Got it now tried it on my own 28PW6615. With the remote pointing at the TV there are five coloured buttons on the top row. Immediately below these buttons are three buttons. The button on the left has what looks like a clock on it. The button on the right looks like a vertical double headed arrow with a horizontal line between them. If you press the left button together with the right button you will go to the "Installation" menu from where you can RF tune your TV.

Posted on Sep 19, 2008

  • 1 Answer

SOURCE: Philips Magnavox TV, model PR1930B101 - cant get off V/C in

You will need a remote control

Posted on Jan 20, 2009

  • 144 Answers

SOURCE: My Philips TV will not turn on

More than likely it's activating the protection circuitry. Most of the time televisions won't give you a sign of trouble until something actually breaks. One day they work and the next they might not. There could be a problem in the power supply or the scan section which are both internal that would inhibit operation to prevent your set from overheating and causing a problem external to the TV like a fire. If your set is over 10 years old, replace it. If it's quite new but out of warranty then get an estimate at a reliable electronics repair store.

Posted on Mar 30, 2010

c1apton15
  • 3400 Answers

SOURCE: How can i change the

In most you can't. You change the aspect ratio on computer or video device feeding the TV

Posted on Jan 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to change sound settings (too much bass). how do i do this?


U still have the tv original remote wright?Yes?Used the tv remote press the Menu button.Pick and go into the tv Sound Setting adjustment have all sound functions setting in there.

Aug 23, 2011 | Philips 27PS55S 27" TV

1 Answer

I have a Philips model # PL7125 TV that I do not no how to set the channels up on in the pass it was used in a Motel and I want to change it to cable, Can you help?


Many hotel TVs have been modified to disable these functions. If you've got the original remote, you should be able to change it, if the TV hasn't been modified.

Jul 06, 2011 | Philips Televison & Video

1 Answer

My sanyo 26 inch model 26649 bought 09/09 has no sound on most channels but a few channels do


hi, it sieams like you should go into the menu and change the sound system, at the same channels that with out sound. to the system of your country. good luck!

Feb 14, 2011 | Televison & Video

1 Answer

I have a old 26 inch tv and its blocked can you give the code for it please


Hello

Philips sets use a four digit code to control the V-chip. The override code for Phips Tv is ( 0711 ), although the set may say "Incorrect Code" for the first time to TRIK you. If "Incorrect Code" is displayed simply enter 0711 again. To use it Hit the Menu key to get to the menus, go Up and Down until you reach AUTOLOCK or SMARTLOCK, depending on the model, and push the "right" arrow" key on the remote control hanset. Enter the override code, and enter it a second time if it says it is incorrect. Once in the AUTOLOCK or SMARTLOCK Menu go to "BLOCK", and push the "Right" arrow key. Go to "BLOCKING OPTIONS' and press the "Right arrow" key. Go to "MASTER DISABLE" and press the "Right arrow" key, so that it says "MASTER DISABLE ON". The V-chip is now reset.
Ok

Nov 29, 2010 | Philips Magnavox 27MS343S 27" TV

1 Answer

I have a Samsung LE26B450C4 26-inch Widescreen HD


U set it on suround sound might help a litte.Best to buy a speakers system's like BOSE or Yama help the sound,modify the sound about 50% louder.If u are hard of hearing,best money ever spend for the BOSE sound sytem,it a dream system's.

Apr 14, 2010 | Televison & Video

1 Answer

I have a philips tv that i bought from a motel cant get all the channels and cant get to menu on the tv


These hotel sets have a pretty complicated setup menu. You will have to get a "master remote". The hotel has the "master remote". They really should not be selling these sets without setting them up for a non comercial application. Try www.encompassparts.com and see if they list a Master remote or a service remote. I would check myself but you didn't post a model number. You have got to have the model # for encompass.

Oct 21, 2009 | Televison & Video

2 Answers

26 inch TV turns off 3-15 times when 1st turning it on - it has a slightly narrowed and shortened picture that over 5 minutes becomes normal and the TV runs normally until turned off - is it a major...


sounds like power supply maybe going depending on how old unit is may not be worth fixing goto pawn shop or thrift store or yard sale i got 26 inch from yard sale for 5 bucks works awesome!!!! Use it it it pukes,but in mean time l would look for replacement!!!!!

Jul 05, 2009 | Televison & Video

1 Answer

We are getting a picture but no sound.


First go to menu make sure audio is not turned off CK speaker . then audio output IC.

Feb 15, 2009 | Sanyo DS31520 31" TV

1 Answer

PHILIPS MAGNAVOX TV PR1910 C125 DATED 1995


Is the Remote you are using an original factory supplied one from Philips?
If NI, then get one. You could ask the local Philips / Magnavox dealership, tho I have my doubts, from the age of the TV. If the dealership has one, yopu could borrow it for amn hour or so. Then use it to go to Menu>SETUP> DEMO or MENU>DEMO>DISABLE and disable the Demo function.
Otherwise, as you said, Out Front of the House on Garbage Pick UP day.

Jul 15, 2008 | Philips 28PW6506 28" TV

1 Answer

Lost remote


Buy an original remote or get a new DVD player. I would never suggest to my worst enemy the purchase of anything from Philips. The lack of support which you are experiencing is deliberate. Don't reward them with another sale.

Aug 25, 2007 | Philips Magnavox 27MS343S 27" TV

Not finding what you are looking for?
Philips Magnavox 27MS343S 27" TV Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...