Question about Bosch 1 - 1/8" Reciprocating Saw RS5

2 Answers

Unable to find manuel

I have a RS5 reciprocating saw model # 06016C039 and can not find a manuel or parts list for it and I need some parts to repair it. Does anyone have a clue where this item could possibly be found?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 699 Answers
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,176 Answers

I checked the Bosch website and the catalog number and saw model number isn't in their database. Recheck the tool and then go to Boschtools.com and under services I believe you can type in your information and get both. If you need me to furnish the info and I will retrieve it for you. Good luck

Posted on Jan 08, 2009

  • David Ford
    David Ford Jan 08, 2009

    went another route into Bosch and found what you are looking for. Just be patient in their site and its there, I don't know why they said they couldnt find it the first time

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My question on 1/3/17 on repair of BLADE CLAMP on Craftsman saw model 315.171081. NO ANSWERS


Dear Vernon,
Sorry about your "no answers" question.
I only answer questions when I have time every few weeks or months, and perhaps none of the other "answer people" knew what to tell you.
So.
I looked up your reciprocating saw on "SearsPartsDirect", entered your model number, and found your saw listed.
There are pictures for you to select the parts you want, and you can order any part they stock from them.
You can also find the part number and order new or used parts from "e-bay."
Unfortunately, you will need to find someone to install the part, it seems.
God bless your efforts.

Jan 27, 2017 | Craftsman Saws

1 Answer

Diagram need sawzall sears


Searsparts.com has an exploded view. You can (in firefox at least) right click and save the JPEG file so you have a copy. Also do a search for repair parts+make+model# and most of the sites will have an exploded view and the parts list but I haven't found a parts list that I could download. I have a dumpster-dive 172.171800 that $30 of parts fixed.

Oct 07, 2013 | Craftsman 8.0 amp Reciprocating Saw

1 Answer

Have a Craftsman sabre saw, model #315.17280 with a defective switch. Switch part is #63896. Where can I locate a new or used switch??


THE ORIGINAL PART IS NOT AVAILABLE ANYMORE, THERE ARE SOME SWITCHES THAT SHOPS ARE LISTING AS REPLACEMENTS. BE VERY CAREFUL WITH REPLACEMENTS, ELECTRICALLY THEY WILL WORK, BUT THERE MAT BE A FIT PROBLEM. GOT LUCK. I HAD TO USE A COMPLETELY DIFFERENT SWITCH MOUNTED IN A RECEPTICAL BOX ON THE TABLE LEG.

Aug 01, 2013 | Craftsman 120 Amp Reciprocating Saw Sabre...

1 Answer

Shaft or rod seems to be broken


The gears are stripped internally in the saw...it will need to be repaired..usually there are regional service centers for repair...look for the one closest to you...

heatman101

Jul 26, 2010 | Craftsman 85 reciprocating saw 926770

1 Answer

How do I remove the nose piece to repair the reciprocating shaft.


The gears are stripped internally in the saw...it will need to be repaired..

heatman101

May 12, 2010 | Craftsman 8 amp Reciprocating Saw with...

1 Answer

Need to replace transistor. No pin out available for red, black and blue wires, please let me know which one goes to transistor's K, A and G.


If the devce you are referring to has K (Cathode) A (Anode) G (Gate) then you are referring to a SCR and not a transistor!
SCR are typically used in AC light dimmer and motor speed control.
You should always use the same or higher rated equivalent component: a Transistor (usually used in DC circuits) IS NOT a substitute for a SCR (usuallly used for AC circuits)!
PLEASE REMEMBER THAT YOU ARE DEALING WITH LETHAL AC MAIN VOLTAGE so unless you are familiar with both Electronics and Main powered devices, I would NOT recommend that you attempt this repair.
As a general rule, if you cannot identify what the original device was and where it originally came from on the circuit board, I would leave it to a qualified person.
Hope it helps you make the right decision.

Jan 14, 2010 | Bosch 1 - 1/8" Reciprocating Saw RS5

1 Answer

Need bosch rs5 owners manual


If you go to Boschtools.com and follow along the left side list you will come to "Owners Manuals and parts diagrams" Thats where you will find the proper manual

Dec 27, 2009 | Bosch Saws

2 Answers

Reciprocating saw stops reciprocating


your missing a tooth on a large round gear in the gearbox.

when the gear on the engine rotates into the position where the little engine gear spins because there is no tooth to come into contact with the engine runs but the gearbox doesnt spin, hence no reciprocation, but engine runs.

if you bump the blade it will start going again, but when you cut it will stop offasionally in mid cut. you can repair this but stop using it the engine gear will be destroyed otherwise

I have a dewalt dw303 that you can use for parts, I need a new trigger or something the motor is dead and I found a new saw. go to craigslist.org, rochester ny tools section and look for dewalt dw303 that is my listing. for ten bucks ill sell you all the gears you need. i think it is close to the same model, i am sure it is the same gearbox.

try opening your gearbox, im positive that is what is wrong.

Mar 18, 2009 | Dewalt Heavy Duty Reciprocating Saw Kit

2 Answers

Reciprocating saw problem


OK just looked at the Searspartsdirect.com website and there are 2 parts that I think it could possibly be. One is the SHOE part # 399725-00 list 4.86 in stock and or guard 157325-00 list 4.59 also in stock. I would suggest that you go to this site and confirm which one you need, but the shoe is the piece that does ride against the work surface. Good Luck and let me know if I can help further

Jan 17, 2009 | Craftsman 8.0 amp Reciprocating Saw

Not finding what you are looking for?
Bosch 1 - 1/8" Reciprocating Saw RS5 Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Saws Experts

River bottom

Level 2 Expert

174 Answers

Parson's Repair...
Parson's Repair...

Level 2 Expert

206 Answers

John Trevino

Level 3 Expert

1383 Answers

Are you a Bosch Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...