Question about Flat Panel Televisions

2 Answers

Insignia NS-LCD37-09 turns on but no image

I have a fairly new Insignia NS-LCD37-09 that i was watching tv one day and the next it powers on but no picture is displayed. help please

Posted by on

  • pudge200202 Jan 08, 2009

    thanks nadakund but if i was to fix it myself then what would i have to buy and how would i install it.

  • pudge200202 Jan 08, 2009

    thank you Jaime867. i will surele need assistance and would like to know your bottom doller for those 2 boards.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

If your TV is less then a year old, still under manufacturers warranty. If not under warranty the defective parts could be the power supply or the back light inverter board. Both boards can be replace easily.
The way to know if you have a defective backlight inverter is by shinning a light from a flash light near the screen with the TV on and check in a 45 degrees angle if you have a dark video in the background, if the video is present then you have a backlight board failure. If no video, then is a power supply failure.
I have both boards if you want to buy them.
Let me know if you require further assistance.

Posted on Jan 08, 2009

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 221 Answers

Its the fault of internal circuit board.any minute component is got blowned due to over voltage supplied.as you said its new get it replaced .this type of damages are covered under warranty.do not void the warranty by opening the tv manually.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ns LCD 26-09 TV not powering up


LCD TV repair - Samsung LW20M21CP not powering up ...

? 25:30
https://www.youtube.com/watch?v=zxqDLDNuCfw
Jul 8, 2013 - Uploaded by RetroGameModz
This is a documented repair of a Samsung LCD TV that I got for cheap. It was listed as not working, which is ...

Samsung LCD TV Repair - TV Won't Turn On - How to ...

? 8:23
https://www.youtube.com/watch?v=n54IurMvr6o
Apr 4, 2014 - Uploaded by ShopJimmy.com
Samsung LCD TV Repair - TV Won't Turn On - How to Replace ... or if you have standby and the TV will ...

MOST COMMON REPAIR FOR LCD - NO POWER - YouTube





Dec 02, 2015 | Insignia NS-LCD26-09 26 in. HD-Ready LCD...

2 Answers

I have a 55 Insignia tv it turned it self off and want come back on.i check the power and it want work either.


Won't not want.
Hi James,
If your LCD TV or monitor has stopped working, or is displaying one of the following
symptoms, then it's a candidate for some new capacitors
- Flickering screen
- Screen image disappears after several seconds
- Dim screen
- Slow start
- Power LED on, but no picture
- Unusual colors and/or lines
The primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can
examine the capacitors in your LCD TV or monitor and actually see if they are bad.
If they appear bulged on top, then they need to be replaced.
New capacitors will solve a host of problems in LCD monitors and TV's and will extend the life
of your monitor or TV by several years.
Check the cables, connectors and connections.
If your TV, flatscreen, or monitor is more than 5 years old it is more like to have suffered a
component failure.
Take it to a repair shop.
https://www.youtube.com/watch?v=TR2iWN6b-LY

LCD TV Repair No Power Power Supply Common Symptoms Solutions How to...

May 13, 2015 | Insignia Flat Panel Televisions

1 Answer

Insignia NS-LCD32


Most likely either the main board (processes all signal) or even an issue with the power board (supplies wrong voltage somewhere).

In either case not cheap.

Mar 23, 2012 | Insignia NS-LCD32 LCD TV

1 Answer

I have a insignia ns lcd42hd 09 tv that on the left half of the screen has ghost images and sometimes vertical lines in it and i noticed when i shake it the screen goes back to normal but i have to do this...


I am also having a problem with my Insignia NS-LCD42HD-09. When I turn it on it is distorted and ghostly. It usually clears up within 10 minutes, but it can revert back at anytime. The television will be 3 year old this December. Does anyone have any advice (other than calling the Geek Squad)

Sep 07, 2011 | Insignia NS-LCD42HD-09 42 in. HD-Ready LCD...

1 Answer

I have an insignia ns-lcd37-07 giving to me, i replaced power supply board and i still don't get anything. what should be my next step?


Now the tv is turn on,tv have power LED light indicaton but no picture?Still have a clicking sound but no picture on the tv LCD screen panel?Yes,than the tv Tuner signal board that the other board 70% also might have the problems too.That the board where the incomming broadcasting signal cable plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish tv Tuner signal board for the replacement.

Apr 13, 2011 | Insignia NS-LCD37 37 in. LCD TV

1 Answer

I have a Insignia NS-LCD26-09 that the backlight appears to have failed. I can see the display but is very dark. One day it worked and the next day it did not. Is it worth fixing?


Check eBay for a new backlight bulb. If you are willing to do the work to replace it, it is up to you how much it is worth. (I am poor so would fix it myself)

Sep 08, 2009 | Insignia NS-LCD26-09 26 in. HD-Ready LCD...

1 Answer

No picture, no sound, does light the insignia sign. Why?


In about 90% of the time the power supply is defective if the TV fails to power ON.
I repair these power supplies, if you need further assistance write to jah2mil@homtail.com

Apr 17, 2009 | Insignia IS-LCDTV32 32 in. Television

1 Answer

INSIGNIA 32 IN FLATSCREEN MODEL NS 32LCD


check for capacitors on the power supply that are puffed up. Also the mai board can cause this but the power supply is where i would start.

Jan 08, 2009 | Flat Panel Televisions

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

1,606 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68427 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...