Question about Sharp Aquos LC-37G4U 37 in. HD-Ready LCD Television

1 Answer

Sharp Aquos 37" Audio Static Issue when watching DVDs

Hi I bought a 37" sharp aquos LCD TV, I also bought a Sharp Aquos Blu-ray DVD player.

Here is my setup:

Blu-Ray -> HDMI -> LCD TV (input 5)
LCD -> Component Audio L/R -> Computer speakers L/R.

The Sound is fine when watching regular cable TV. When I play DVDs there is intermittent static on the sound. The static went away with this setup.

Blu-Ray -> HDMI -> LCD TV (input 5)
Blu-Ray -> Component Audio L/R -> LCD TV Component Audio L/R (input 5)
LCD -> Component Audio L/R -> Computer speakers L/R.

Any idea why my auido is not working (getting static) through HDMI interface ???

Posted by on

  • 4 more comments 
  • flutesiva Jan 08, 2009

    so I should replace the LCD TV ??, I just bought it two weeks ago. I still have the warranty.

  • Anonymous Mar 12, 2014

    I hooked up my new phillips blu ray to my sanyo plasma tv through the hdmi ports I have video but no sound the tv says to it is a dvi connection to use the audio for component 3 for sound but the blu ray does not have an audio out just the hdmi

  • Anonymous Mar 14, 2014

    My Philips 5560 does not read Blu-ray, and only play some DVD's

  • Anonymous Mar 16, 2014

    I have a 70 in 240mhz sharp aquos tv. When I watch hockey on it the puck look like it has a trail. How do I stop this?

  • Anonymous Mar 16, 2014

    I have a 70 in 240mhz sharp aquos tv. When I watch hockey on it the puck look like it has a trail. How do I stop this?

  • Anonymous Mar 24, 2014

    tele turns to off after 15 mins restarts after cooldown

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

I have had to replace the hdmi input board on these units to fix them.

Posted on Jan 08, 2009

  • David Ranshaw Jan 08, 2009

    if you want the same tv I would get it repaired. The new boards do not show this problem.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

90 inch Sharp Aquos will not power on


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Jan 12, 2017 | Sharp Televison & Video

2 Answers

I have a sharp aquos tv model lc-32m400x. When i turn the power on via button at the back the green light comes on for about 10secs then turns to red and flashes about every 11/2 - 2secs. Any ideas.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 11, 2017 | Sharp Televison & Video

2 Answers

Sharp aquos tv not turning on


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 09, 2017 | Sharp Televison & Video

3 Answers

How to watch 3D movies


Use a 3D spectacle to feel it better.

Jan 08, 2017 | Samsung Televison & Video

1 Answer

Need instructions for bdp-bx18 blu ray player.


There is a link to the operating instructions on the Sony eSupport web page found here.
Blu ray Disc DVD Player

Jan 03, 2015 | Televison & Video

1 Answer

What is password for Sharp tv 21Mf2-Amk2 ask


Finding the Manual   Go to the Sharp website, look it up and download it. It should be there.

Nov 03, 2014 | Televison & Video

1 Answer

How do i watch my tv with a broken remote


You can buy a universal remote and program it to work with your TV. I have always had good luck with RCA universal remotes. You can also program the remote to run your cable/sat box and your DVD/blue ray player. You could also go to the web site of the company that made the TV and order a new remote. This would be more expensive but the remote would run all the funcitions while the universal may not.

May 24, 2014 | Televison & Video

2 Answers

Blu Ray - DVD player does not respond to remote


Did you check to see if remote pickup on player is cleal and not being blocked?

Dec 15, 2013 | Televison & Video

3 Answers

Where can I purchase the Audio Video Connection for my dvd player I want to hook it up to my TV but can't find the correct cable Thank you Sandy


For the COBY TF-DVD7500, the video is carried on a single RCA plug cable. You can make due with a composite video cable (with three RCA plugs on each end) or get an RCA cable. The audio output can either be digital audio (which uses a special coax cable) or a headphone connector (analog audio).I believe the headphone jack is a 3.5 mm connector. If you use a composite video cable to your TV, you can connect the red and white plugs to an adapter (3.5 mm M to 2 RCA F). Then the TV speakers will get the audio track; otherwise you can use the DVD player speakers or the digital audio out.

I hope this helps.

Cindy Wells

Jan 24, 2011 | Coby TF-DVD7500 Portable DVD Player with...

12 Answers

Comcast remote code for 42in sharp aquos lcd


the 10093 code worked perfectly!!! YOU ROCK! the codes in the comcast manual dont work. i don't have an aqquos, but a regular sharp hdtv... purchased in nov '07

Dec 14, 2007 | Televison & Video

Not finding what you are looking for?
Sharp Aquos LC-37G4U 37 in. HD-Ready LCD Television Logo

1,190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71754 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...