Question about GE 27928GE5 Cordless Phone

1 Answer

Enter memory data

I can not find the manual as to how to enter memory phone numbers

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 34 Answers

Hello,
Here are the commands to run the phones memory dial (speed-dial).  I have included the instructions for deleting and changing numbers as well.  It is listed below.  I hope this helps you out.
Ken

MEMORY DIAL INSTRUCTIONS Store up to ten 20-digit numbers in memory for quick dialing. Storing a Number in Memory 1. Make sure the phone is OFF (not in TALK mode). 2. Press the MEMORY button. 3. Press a number (0-9) to store the dialed number in that memory location. 4. Press the MEMORY button again. 5. Use the handset number keypad to enter the telephone number (up to 20 digits, including pauses) and press the MEMORY button again to save the number. The unit beeps to confirm. 6. To enter another number in a different memory location, return to step 1 and repeat the process.
Storing a Redial Number 1. Repeat steps 1 through 4 in Storing a Number in Memory. 2. Press the REDIAL button. 3. Press the MEMORY button to store the number. You will hear a confirmation tone.
Changing a Stored Number 1. Repeat steps 1 through 6 in Storing a Number in Memory. 2. Press the MEMORY button to store the number. You will hear a confirmation tone. The old number will be overwritten with the new number.
Dialing a Stored Number 1. Make sure the phone is ON by pressing the TALK button. 2. Press the MEMORY button. 3. Press the number (0-9) for the desired memory location. The number dials automatically. Inserting a Pause in the Dialing Sequence Press the PAUSE# button once to insert a delay in the dialing sequence of a stored telephone number. A pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). Each pause counts as 1 digit in the dialing sequence. If you need a longer pause, press the PAUSE# button twice.
Deleting Stored Numbers 1. Press the MEMORY button. 2. Press the desired memory location (0-9). 3. Press the MEMORY button twice to delete the entry. 4. You will hear a confirmation tone.

Posted on Jan 08, 2009

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
tboy1959
  • 1 Answer

SOURCE: programing the memory numbers

http://www.uniden.com/pdf/EXI2960om.pdf

Posted on Sep 30, 2007

SOURCE: Lost Manual; Want to enter new phone number into memory.

There a multiple websites that have the PDF version of the manual for this phone posted to download for free. Just enter the make & model number into the search field on your browser. Many of the sites that sell them have free manuals available.

Posted on Apr 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Putting numbers in the memory and editing


To store numbers in memory do the following
(Make sure the phone is in standby and not in TALK mode)
2.) Press the memory button on the handset or base.
3.) Press the desired memory location button (0 through 9 number keys) or
use the CID-VOL (- or + ) buttons on the handset or CID/rev or CID/skip)
buttons on the base to scroll to desired memory location. If the memory
location is occupied, the stored name and number displays. If the
memory location is unoccupied, EMPTY shows in the display.
4.) Press the memory button again. The display shows ENTER NAME.
5.) Use the base or cordless handset touch-tone pad to enter a name (up to
15 characters).
6.) Press the memory button again to save your selection. The display
shows ENTER TEL NUMBR.
7. Enter the area code followed by the
telephone number (up to 24 digits, including pauses) and press the
memory button again to save your selection. The unit beeps to confirm.
8. To enter another name and number in a different memory location,
return to step 1 and repeat the process.



Manual available HERE

Jun 17, 2011 | Uniden Cordless Phone

1 Answer

There is nothing in phone memory but it shows as if 44mb is full..... sometimes the phone memory will itself reduces to 18mb.. how can i get rid of it ?


reset your phone by entering this number *#7370# and the security code is 12345, but back up your important data such as phone book to your mmc, because it will erase all data on phone memory

May 09, 2011 | Nokia N73 Cellular Phone

1 Answer

I've download a clip and after i had a virus.What should i do to clear it


Hi, Actually you can remove the virus itself, what should you do copy the phone your personal data, image, sound, video and contact number, Save into a memory card. Do hard format to your phone, how to hard format code, type * # 7370 #. enter access code, std code by nokia is 12345. wait until you restart the phone. Now what to do, you should copy all the data you copy into memory before your PC, including contact forlder. Format memory card using your PC, re-enter data previously copied to the memory card with the folder. Put the memory card trsebut to your phone, copy all the contact number in the memory card to phone memory. Your phone is now fully functional. You just need to re-enter other applications such as games and other applications.

Aug 05, 2010 | Nokia N70 Cellular Phone

1 Answer

How does ideactivate my mobile password


You can reset your phone. There are two methods allowing you to reset your phone to a more unwavering state.
Normal Reset
Using the *#7780# sequence.

It will restore ini files from ROM keeping all your data (themes, 3rd party applications, video, photos, and music files)
Deep Reset
Using the *#7370# sequence.

Completely format phone memory. Default files are cleaned up and rewritten.

Note that data found on memory card will not be altered
How to proceed When using symbian60 v1 based phone such as nokia 7650, 3650 or N gage models these two key sequences can be entered in the same way you dial up a phone number. The phone will prompt you to enter a security code (12345 by default).

May 18, 2010 | Nokia 6233 Cellular Phone

1 Answer

How to program telephone numbers in memory?


Your phone (KX-TC911-B) can store up to 10 phone numbers. Numbers 0 - 10 are your memory stations.

1. Make sure the TALK indicator light is off.
2.Press Program. The TALK indicator light will start flashing.
3. Enter the phone number.
4. Press AUTO.
5. Press a memory station where you want to store a particular phone number.
6. You will hear a confirmation tone. 1 beep means the number has been successfully stored.
2 beeps mean, you entered the same number that has already been previously stored.
Click on the link if you would like to have a pdf copy of the manual/tutorials.

Jun 24, 2009 | Panasonic KX TC911B Cordless Phone

1 Answer

I want to find out how to set up our Canon CFX0-L4000 fax Machine


CANON CFX-L4000 UNOFFICIAL MANUAL

RIGHT KEYPAD

FUNCTION
SET
01 DATA REGISTRATION
02 DELAYED TRANSMISSION
03 POLLING
04 MEMORY REFERENCE
09 REPORT
11 UP
13 +
14 LEFT
15 SPACE
16 RIGHT
18 CLEAR
19 DOWN

Keys 1-20 are speed dial keys. If speed dial is not set, message is displayed and manually entering the telephone number is prompted. Press STOP to clear.

Pressing FUNCTION accesses the menus associated with keys 1, 2, 3, and 4. After accessing a menu, the cursor keys, SET, and occasionally the telephone key pad are used for selecting options and setting values.

EG. Setting a speed dial number:
FUNCTION - DATA (01) - SET - SET - UP/DOWN to select speed dial number - SET - UP/DOWN to set number/name - SET - UP/DOWN/LEFT/RIGHT/PHONE KEYPAD to enter value - SET

EG. Setting unit telephone number
FUNCTION - DATA (01) - DOWN once - SET - DOWN once - SET - PHONE KEYPAD to enter number - SET

EG. Retransmit from memory (assumes memory light is on)
FUNCTION - MEM (04) - DOWN once - SET - UP/DOWN to select document number (LEFT/RIGHT to view associated telephone number) - SET

EG. Delayed transmission
place document into feed - FUNCTION - TX (02) - SET - PHONE KEYPAD to enter time to send - SET - PHONE KEYPAD to enter phone number - SET - SET - document is scanned and will be transmitted at set time


for full guide you will have to search and purchase one.

May 28, 2009 | Canon Office Equipment & Supplies

1 Answer

Uniden 900MHz phone model EX17960A


Using the Speed Dial Memory
Storing Numbers in Speed Dial Memory
Your cordless phone can store up to ten numbers in the speed dial memory.
1) When the phone is in standby mode, press the memory key. The talk/batt low LED flashes.
2) Use the keypad to enter the phone number; each number can be up to 20 digits.
7
3) If you need the phone to pause during the dialing sequence, press
the redial/p key to insert a two-second delay between the
numbers. You can enter multiple pauses to increase the delay.
Each pause counts as a digit.
4) Press the memory key again.
5) To store this number as one of the ten speed dial numbers, enter a
digit from 0 to 9. If there is already a number in that speed dial
setting, it will overwrite the previously stored number without
warning. You will hear a confirmation tone indicating that the
number has been stored.
NOTE: When storing numbers into memory, if the handset is idle
(i.e., no key is pressed) for more than 30 seconds, it will beep rapidly, and the phone
will return to standby mode.
Dialing a Stored Number
1) When the phone is in standby mode, press the talk key, and listen for a dial tone.
2) Press the memory key and enter the speed dial entry (0-9) that has the stored number you
want to dial. (If you enter a digit that does not contain a stored number, the handset will
beep rapidly, and the phone will not dial.)

Nov 13, 2007 | Lands Phones

4 Answers

Emmerson Phone Manual EM2248


Emerson (EMSEM2646WH) I need to know how I can set up the speaker phone and in a way that will be clear and loud. I lost my manual, could you send another one to me?
thanks

Nov 05, 2007 | Emerson EMSEM2646WH Phone

3 Answers

Programing the memory numbers


http://www.uniden.com/pdf/EXI2960om.pdf

Aug 31, 2007 | Uniden Cordless Phone

1 Answer

Ge cordless model 26930 memory dial


hit memory, choose a number, hit memory, enter name, hit memory enter number, hit memory

Aug 11, 2007 | GE 26930GE1 Cordless Phone

Not finding what you are looking for?
GE 27928GE5 Cordless Phone Logo

1,140 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Cindy Wells

Level 3 Expert

5428 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...