Question about Toshiba Sony DNS707F Personal CD Player

1 Answer

SONY CD Walkman D-NS707F Window displays "HOLD"

When 'on' button is depressed, "HOLD" is displayed and flashes. Device won't work, changed batteries and tried other buttons.

Please help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Move Hold slider button on bottom of player found answer by Annie in another question

Posted on Feb 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the AM radio to FM?


Hello
Press RADIO BAND.AUTO PRESET until the band you want appears in the display (direct power on). Each time you press this button, the indication changes as "FM" --> "AM". Hold down TUNE + or --, until the frequency digit begins to change in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you can't tuned in a station, press the button repeatedly to change the frequency step by step. If FM broadcast is noisy, press "MODE" until "Mono" appears on the display and the radio will play in monatural without any noise. Only strong FM signals can be decoded to stereo. OK.

Oct 22, 2011 | Sony CFD-S300 Radio/Cassette/CD Boombox

2 Answers

How do you auto preset radio stations?


Hello
[1] Press RADIO BAND.AUTO PRESET until the band you want appears on the display [direct power ON]. Each time you press the button the indication changes as follows. "FM" => "AM"
[2] Hold down TUNE+ or --ve until the frequency digits begin to change in the display.
The player automatically scans the radio frequencies and stops when it finda a clear station. If you can't tune in a station, press the button repeatedly to change the frequency step by step.
If FM band is noisy, press the MODE repeteadly until "MONO" appears in the display and the radio will play it monatural. If FM radio signal at your area is very weak, this type of noise may occur. OK.

Sep 28, 2011 | Sony CFD-S350 Radio/Cassette/CD Boombox

2 Answers

Radio plays with batteries but when power cord is used the display says check battery.


Hi,

Connect the power cord to the radio without the batteries inside, i mean remove the batteries from the radio, and see what it will display.

May 29, 2011 | Sony CFD-ZW755 Radio/Cassette/CD Boombox

1 Answer

HOW DO I SET CLOCK


1 Press STANDBY/ON to turn off the unit, if it is turned on.
The clock flashes on the display window.
2 Press and hold PROGRAM/CLOCK SET for more than 2 seconds.
The hour digits start flashing.
AM
3 Press the CD forward or CD back button (track skip buttons) to adjust the hour, then press PROGRAM/CLOCK SET.
The minute digits start flashing.
PM
4 Press CD forward or CD back button (track skip buttons) to adjust the minutes, then press PROGRAM/CLOCK SET.
I hope this helps.. !
If you need more info have a look here for the manual which is in pdf format:
The clock information is on page 10
JVC RC-EX25 manual
Regards
Mike

Oct 12, 2010 | JVC RC-EX25 Radio/Cassette/CD Boombox

1 Answer

RC-QS11 cd tray won't open. When open button pressed display flashes up 'open' machine whirrs for a couple of seconds then display changes to 'cd'


This is most likely a stripped loading gear or a broken or worn out drive belt.

Some units will display this when a disc is jammed.

Either way you must take the unit apart and inspect the mechanism.

I hope this helps,

Thanks!

Jan 22, 2010 | JVC Boomboxes

1 Answer

How do I preset radio stations?


PRESET RADIO STATIONS
1 press RADIO BAND. AUTO PRESET to select the band.
2 Hold down RADIO BAND > AUTO PRESET for 2 seconds until "AUTO"flashes in the display
3 Press DSPL/ENT/MEM. The stations are stored in the memory from the lower frequencies to the higher ones.

if a station can not be preset automatically.
you need to preset a station manually.
1 press RADIO BAND. AUTO PRESET to select the band.
2 tune int he station you want.
3 hold down DSPL/ENT/MEM. for 2 seconds until the preset number flashes in the display.
4 press PRESET + or - until the preset number you watn for the station flashes in the display.
5 press DSPL/ENT/MEM. The new station replaces any old one.

TIP the preset radio stations remain in memory even when all power is disconnected.

manual available at sony
http://www.docs.sony.com/release/CFDF10.pdf


Jan 01, 2010 | Sony CFD-F10 Radio/Cassette/CD Boombox

1 Answer

My Sony CFD SO1 keeps skipping/display light keeps flashing


That is an electronic problem. Probably a just-about-to-break cable in the motor of the CD drive, that sometimes causes a short and turns off the unit, or sometimes makes it to comport erratically and produce the buzzy sound. If you have electronics knowledge, then you may open and check the wiring harnesses. If don't, take it to your local electronics repair.

Nov 20, 2009 | Sony Boom Box With CD Player & Cassette...

2 Answers

How to program radio presets on sony cfd-s01


hold down the display/enter button until FM - 01 flashes. then press the display/enter button. The station you were tuned into is now preset #1

Dec 29, 2008 | Boomboxes

1 Answer

Don't know how to set the time/clock.


Setting the Clock
Before operating the unit any further, first set the clock built
in this unit.
• When the unit is turned on with CD or tuner selected, press
DISPLAY first to show the clock indication.
1 Press and hold PROGRAM/SET
for more than 2 seconds.
The hour digits start flashing on the
display.
2 Press 4 or ¢ to adjust
the hour, then press
PROGRAM/SET.
The minute digits start flashing on the
display.
3 Press 4 or ¢ to adjust
the minute, then press
PROGRAM/SET.

If there is a power failure
The clock loses the setting and is reset to “AM 12:00.” You need to
set the clock again. If the batteries are inserted in the unit, this has
no effect on the memory.
To show the clock when CD or tuner is selected
Press DISPLAY.
• Each time you press the button, the display changes the clock
indication and the normal indication alternately. (Operating the
unit while clock indication is displayed change the display to the
normal indication.)

Feb 04, 2008 | JVC 10 Watt CD Boombox with AM/FM, Dual...

2 Answers

Overall Problem - Panasonic RX-ED707 won't work properly at all


only 1 reason for that faults :

there is a flat connects the top panel which has all the controls with the other circutes in the stereo...
so you have to open it and care for the cd unit it damage easily then check the flat for loseness or cuts
it happened to me also and that works perfectly
good luck

Nov 14, 2007 | Panasonic RX-ED707 Boombox

Not finding what you are looking for?
Boomboxes Logo

Related Topics:

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Boomboxes Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

Blake

Level 2 Expert

136 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

Are you a Toshiba Boombox Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...