- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Step 1:- Switch off the machine
Step 2:- Press 0 & 8 and switch on the machine.
Step 3:- Now the machine comes to service mode.
Step 4:- Now press 2002 and then start button
Step 5:- See the current error value and change to 0.
Step 6:- Press ok .
Step 7:- Switch off and on to check if problem is solved .
Step 8:- if still you get c413 errror,you may have to remove the fuser unit and physically check for heater lamp broken, or thermistor abnormality, and corresponding connectors.
Hi, thank you for contacting me. I will do my best to help you solve this problem. Could you please give me more information surrounding the issue and about your operating system. Too much information is better than too little. Here are a few details that would help:
Try turning off the printer and disconnecting it from the power source for about 5 minutes (physically unplug it). If the problem persists when power is restored to the unit. Please let me know.
When requesting technical assistance, remember to give as much information as you can about the problem. Explain the situation leading up to the problem and the current status. The information given appears to be incomplete.
You may have inadvertently damaged the paper sensor in which case it will need repairing, but sometimes it can just be a case of resetting the unit. Turn it off, unplug it, retry after all on again. Please post back i would love to beat thie cheeky printer xxx