I have an ex tiny machine and motherboard is P4M-915G/PDI i bought it after tiny went bust so i did not get motherboard manual i was going to upgrade so pulled out all cables to fit new motherboard but would like to put it back together so would appreciate if anyone cantell me where to get manual
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Easy, if you find where your front usb port is connected you'll see some odd ports that have 10 pins slots one of which has a missing pin, either in the lower left hand corner or in one of the center pin positions. Find the one that matches your generic (usb) card reader and plug her in. The card readers that come prebuilt in computers now are based on usb technology and fit into the same slots as the USB connectors. In fact if this is on a 915G it should plug into one of the JUSB1 or 2 slots.
Hi, first check if you have a red or green ready led light on somewhere on the mobo.
then check if you have the cables from the front of the case attached to the correct pins on the board. your board documentation will tell you which pins and the case cables are marked as to which ones they are.
Do you hear any beeps at all? Do you have a system speaker on the motherboard? If not, plug a 2-pin system speakers onto the motherboard where it says "speaker" and listen for some beeps.
You may have a fried CPU or dodgy RAM on your hands. Possibly even a faulty AGP/PCI-E slot, to name a few.