Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Ultimate care II 3 buttons on top

I just replaced the motor cpl. and still getting the grinding noise and it will only fill and drain. I am assuming the transmission is shot?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Called my repair guy, who is always helpful. He told me if it wasn't the motor coupler it was the transmission. He said he could rebuild it for around 80-150$, in my opinoin he is a good honest person, never does me or the many people I know any wrong. He said their was no telling how long it would last. I have a family of 5, the washer is almost 10. I went out and bought a new one. My parts guy recomended I buy the same brand Whirlpool, with a direct drive motor. I took his advice and got a new one with the same type of motor. I stripped down the old one, kept the motor, dog ears, motor coupler, and the water pump. Hopefully those parts will save me some money. The dog ears and motor coupler, I just replaced them within the last couple weeks. My parts guy always says "lighten up them loads" and it is good advice as I always replace dog ears every 6 mos. But at 8$ a pair it's an easy fix. Having a reliable parts man, who explains how to fix everthing- PRICELESS. Anybody in SE Michigan should stop by Richard Bros. Appliance in Riverview, MI, they do service calls as well. Thanks-Scott

Posted on Jan 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Whirlpool Ultimate Care II washer. It fills and agitates but it will not drain or spin. When it hits the spin cycle it sounds like a timer is going off but nothing happens. Does anyone have any...


The only thing I can think of for this is a worn coupling for the motor. Does the noise sound simmilar to a grinding sound? if thee is no noise from the motor then I would suspect the timer. I have had both of these go out on me and they seem to be common problems. I hop this helps.

Nov 11, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Whirlpool Ultimate Care II - making funny noise


this is probably a bad motor coupling, you have to take the cabinet off, then the drain pump, then the motor, the coupling is located between the motor and the trans

Aug 06, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool ultimate care II stops after filling


Hi, could be faulty timer, faulty water level switch, faulty start capacitor for motor, or faulty motor. always put clothes in machine before starting. you can empty machine by lowering drain hose to flow level.

Aug 02, 2009 | Whirlpool Ultimate Care II GSW9650LW Top...

1 Answer

WATER FILLS AND DRAINS BUT DOES NOT AGITATAE OR SPIN


motor coupler is goingto be the issue, easy enough to replace, you can find a video on you tube, search "whirlpool motor coupling"

Jan 25, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Barberboss


need more details please stopped what wont fill wont spin wont drain does it make any noise ?? does it fill and not wash

May 09, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Machine wont wash


needs a new motor coupler. small round rubber piece between the motor and transmission. easy to replace

Oct 29, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Grinding noise when it goes to agitate or spin.


gramps Most likely the problem with your washer is worn out motor drive coupling. You can buy it here: http://click.linksynergy.com/fs-bin/click?id=SrmyP8LkIos&offerid=92089.547094027&type=10&subid= If you need help to replace it, let me know. Gendos...post back

Feb 05, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...