Question about Print Servers

1 Answer

Hcl h505 driver software

I couldnt find hcl h505 printer so kidly help me

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers

The HCL h505 printer is not compatible with Windows XP or Vista.

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I install my lexmark X5630 into my computer


To install Lexmark X5630 you need to drivers/ software which you can download from Lexmark Official Support for X5630
Visit the above link, select the Operating System (OS) to get the drivers. After downloading the
drivers file, double-click the file to run it and follow the on-screen instruction to install the printer drivers/ software

Let me know if any further clarification/ assistance is required.

Good Luck!
Appreciate generously, if the solution could have been of any help!
CreativeTECH

Jan 10, 2011 | Lexmark (12T0157) Print Server

2 Answers

Drivers installation


Hi,
Here is the web page with your Xerox printer drivers and software:

http://www.support.xerox.com/go/results.asp?Xtype=download&prodID=WC4118&Xlang=en_US&Xcntry=USA

Good luck!
Regards,
Graemevm

Apr 28, 2009 | Xerox WorkCentre 4118 Network Kit...

1 Answer

Can I download the easy print software for my Canon 1610 printer"


If you do not have the software, you need to download the software from one of the following locations:

Official Canon Drivers and Software

Canon USA:DRIVER & DOWNLOADS

Canon UK - Easy Printing

Download Library - Canon USA

After downloading is finished, unplug the printer USB and run the software that you downloaded.
The software installer will tell you when to connect USB.

Mar 16, 2009 | Canon Axis 1610 Print Server

1 Answer

I am trying to install a Lexmark, 3in1 p6210


Before plugging in the USB cable you need to install printer software.

If you have the original printer disk install software from disk.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.

Mar 01, 2009 | Lexmark Print Servers

1 Answer

Printer lexmark z43


Lexmark does not distribute replacement install disk for all models.

Contact Lexmark here, to see if the disk for your printer is available.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
Afterdownloading,findthefile,doubleclickonthe file, then if you get introubles,follow theinstructionsbelowtoreset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website and run the file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.
Note:someprinterdoes not work on Vista, if you do not find any driver downloadfor Vistaon your model page, that means your model is not Vista compatible.

Oct 18, 2008 | Print Servers

1 Answer

Lexmark x9350 printer setup


are you using anything like bluetooth for connecting the printer and your computer..

have you made sure tat the bluetooth device is also fixed and its driver is installed on your system...


this may be your problem...

chk it and respond...
we are here to help you,..

thankyou

Jun 17, 2008 | Print Servers

1 Answer

One page wasted before print out


Hi Ontheedge,

I really hate suggesting it is a Netgear issue, and dump it, Edge, but most of the posts I found on that Print Server is not good. I would check for a setting in the Manger software, but not sure where it is. These link suggest it is a Netgear issue.

http://forum1.netgear.com/showthread.php?t=17002

Dec 20, 2007 | NetGear PS121 Print Server

1 Answer

Why so slow?!!!??


Matt C., I bet that your 'IT guy' installed the Netgear software on each PC. He should have installed it on only 1 PC and used it to set the IP, Subnet Mask and Default Gateway on the PS101. Use the 'Printers and Faxes/Properties/Ports' tab of the printer to get the IP, you'll need it in a minute. Download and expand the appropriate Drivers for the printer, or have the CD ready. Remove all instances of the Netgear software from the PC's if your PS101 is configured (Use the 'Control Panel / Add-remove software') Once the PS101 is configured, you can install the 'network printer' on all 3 PC's using the following method (assuming WinXP): Click 'Start' Click 'Settings' Click 'Printer & Faxes' Click 'Add A Printer' When the 'Wizard' opens up, click 'Next' Make sure the option for 'Local printer attached to this computer' is selected, but DO NOT select 'Automatically detect and install my Plug and Play printer' Click 'Next' Click 'Create a new port' Using the 'drop down' select 'Standard TCP/IP port' Then click 'Next' twice In the field 'Printer Name or IP Address' enter the IP that your 'IT guy' assigned during the initial setup (You should have that from the 'Printers and Faxes/Properties/Ports' that I referenced earlier. Click 'Next' You should see 'Standard: Generic Network Card', if so click 'Next' then 'Finish' The 'Add Printer Wizard' should open. Click 'Have Disk' and browse to the folder that you expanded the drivers for the printer into. Click 'Print Testpage' Click 'Finish' You should be printing a lot faster. Let me know if this doesn't work, or isn't clear!

Nov 16, 2006 | NetGear PS101 Mini Print Server Print...

Not finding what you are looking for?
Print Servers Logo

Related Topics:

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

old marine
old marine

Level 3 Expert

1463 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...