Question about Car Audio & Video

1 Answer

Power is on but no sound in car stereo

Sometimes when there is **** in the car while driving the car stero stop s giving any sound sometimes it gives sounds having nippon car stereo with detachable front panel

Posted by on

  • asdanew Jan 10, 2009

    i have also the same problem. my car stereo power on but no sound.

    i have a two wires not used. label NC and antenna. Is there a solution to my problem?

  • brotherdaveb Apr 19, 2009

    I've checked my speakers with a 9v. I was pretty sure it wasn't the speakers because they worked when I took the old ones out.


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 67 Answers

First, get a small 9V battery and connect the leads to your speaker wires. You should hear a pop if your speakers are OK. Then I would check the radio itself and make sure all speaker leads are connected correctly. If this does not work, something is up with the output of your radio. If you are using an amp, make sure all connections are good and that RCAs are connected correctly.

Posted on Jan 29, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Speakers have a crackle in the sound also rear speakers not working

can mean several things. The crackle is subjective and can mean distortion. Distortion most of the time comes out of the amplifier. Could be you have blown a capacitor in the power supply of the amplifier, making it work with quasi half the voltage. There is no need to change the polarity on a speaker, because when one is not working infuse, it won't distort the music. You only could have difficulty with the stereo sound. It could be a bit unclear where the sound is coming from and could sound a little less powerful.Check the speakers on a different amplifier, to hear if I'm right. Only if you switched on sound while the amp was giving full power, you could have blown the speakers, but most of the time they don't give any noise after that.

Jan 16, 2015 | Ranger Communications 1998 1999 2000 Ford...

1 Answer

What does ext-mute mean and how do I get rid of it and reset my stero

usualy can call a dealer they should give you the code to reset your stero

Mar 02, 2012 | Panasonic Car Audio & Video

1 Answer

How do u reset the stero without remote control kenwood kdc mp628

if the face of radio comes off. there should be a rese.t if it does, behind the face of stereo. if its a original car radio. try by unhooking power to the stereo, to see if this resets it or remove radio fuse for a few minutes.. leave unhooked for about 3 or 4 minutes.

Feb 02, 2012 | Kenwood Car Audio & Video

1 Answer

Manual for model CXE2758 pioneer car stero

My 1999 chevy tahoe has a factory radio separate from the stereo what is the best way to solve this do I get an am fm stereo instead or just get a am fm cd style stereo

Oct 02, 2011 | Car Audio & Video

1 Answer

Power going to stero but no power coming from stero

I don?t exactly understand your question if power is going to the stereo now I guess you need power as an out put to turn on an amp. Or what is the application you need this for.

Jan 01, 2010 | Clarion Car Audio & Video

1 Answer

My eclipse stereo is in lockdown-anti theft mode & can't unlock

contact the dealer of your car, give the vin no:of your car to them, and they will be able to give you the radio code

Oct 21, 2009 | Car Audio & Video

1 Answer

Wiring diagram for a Sony XR-C210 car stero

SONY XR-C210, XR-C214
16-Speaker RF-
5-Speaker RR+
17-Speaker LF+
6-Speaker RR-
12-Power Antenna Turn On
18-Speaker LF-
8-Speaker LR+
9-Speaker LR-
15-Speaker RF+

Sep 13, 2009 | Sony Car Audio & Video

1 Answer

After installing the alpine CDE 9870 car stereo there was no sound... although the car speakers work.Maybe the audio in the stereo?Can thatbe fixed?

In this situation 8 times out of 10 the problem is not with the radio, it's that there are factory amplifiers. Many cars have them, and most require a little work, or an adapter to get going. Tell me the year, make, and model of the car, and perhaps I can give you more info.

Aug 09, 2009 | Alpine Car Audio & Video

1 Answer

Stereo resets every time i turn of ignition

make sure it is grounded and the two battery wires are married

Jul 26, 2009 | Car Audio & Video

2 Answers

Need code for radio for 2002 honda accord

cant give you the code. can tell you wer to get it though. Ring honda with chassis number of car and the details you have above. they should be able to give it you over the phone. Sometimes there a bit picky though about this so you might have to go to them with car and id

May 10, 2009 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

63990 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides