Question about Sony KV-36FS16 36" TV

1 Answer

Sony KV36FS16 36" Timer/Standby light blinks 9 times.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Sony Master
  • 1,635 Answers

A common cause is the fly-back transformer and HV multiplier assembly requires replacement. In some cases, but more rare, there may be a failure in the vertical amplifier output stage. There are some other support components that can cause this as well.

In some cases, if the CRT has a short it can damage the horizontal output stage area.

After replacing, the horizontal output transistor and its support components must be verified. Also, this type of failure will sometimes cause some failures in the main power supply.

An experienced tech who knows your model of set can verify the cause of failure, and replace the necessary parts. Take care that this type of service may be expensive.

Jerry G.


Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Standby timer blinks times


There are particular blinks meaning on sony TV. I can give you the problem from your sony tv if you specify or count how times the LED flashed.

Jul 06, 2014 | Sony KV-27S42 27" TV

1 Answer

Sony kv-27v40 standby/timer blinks 5 times


Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

Apr 23, 2012 | Sony KV-27V40 27" TV

1 Answer

STANDBY LIGH BLINKING 9 times...


I have a Sony SRS BBE Trinitron (WEGA). The last few days when I tried to turn it on using the remote the Red Light would go on but the TV did not turn on. I would have to press the power button again to turn it on.. I tought the remote battery was just low.

Today when I tried to turn it on nothing is happening and the Red Light is blinking 9 times ??? I tried to unplug it and try it again, still does the same thing ???

We need help...
Lori Nall

Jun 19, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Repair inquiry


Hi,
     According to the LED BLINKING there must be some problem that are given below:

Diagnosis item:  Video out abnormality detection

TIMER/STANDBY
Indicater
Number of blinks:  
5 times


Supposed malfunction:  Video out, IC7101, 7201, 7301 and others in C board circuit.
Q510,516,524 (A board)

Condition:TIMER/STANDBY LED blinks approx. 30 seconds,
and then blinks for the self diagnosis.

Self-diagnosis
screen display,
Diagnosis item: Results:   5 : AKB 000


So, This was the result of 5 times led blinking.I would suggest you to please contact any expert or strongly recommend to contact any SONY SERVICE CENTRE for repair because it's not an easy job to rectify this problem. Hope you better understand my sayings.

Thank you for using fixya.

 
                                 
                              


Nov 29, 2008 | Sony KP-53HS10 TV

1 Answer

Sony KV36FS16 36"


usually there is a shorted transistor or a diode in the power supply for this kind of problem any tech will be able to find out what is wrong after some tests

Sep 10, 2008 | Sony KV-36FS16 36" TV

3 Answers

Sony TV stuck in stand by mode


the 9 blink code is caused by a bad diode on the pc board. The zero crossing detect circuit is not allowing the power supply to come on .

Sep 06, 2008 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Standby Light blinks


it is an error code of the sony maybe there is a problem in it.

Apr 09, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Fix my tv


please contact ur dealer

Mar 11, 2008 | Sony KV-32S42 32" TV

1 Answer

Sony KV30hs420 0 Stanby Light Timer Blinks 3 times and powers TV off


Led blinking Three times means B+ over voltage protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply circuit, check T603 and R672. If you have electronic knowledge you may be able to fix it. Let me know if I could help you further.
Hope this helps.

Jan 25, 2008 | Toshiba CN36X81 TV

Not finding what you are looking for?
Sony KV-36FS16 36" TV Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68250 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...