Question about Hitachi 53UDX10B 53" Rear Projection Television

1 Answer

RED BLINKING LIGHT ON HITACHI TV CANNOT TURN ON

My HITACHI TV model 53UDX10B was working fine last night, when I went to turn it on today, nothing happened, only the red LED light keept blinking, I could also smell like something burned inside, I would like to know if this is something that would not be too expensive to fix, my TV is about 10 to 12 years old.

Posted by on

  • lumba Jan 21, 2009

    I don't know what the resisters look like or the ICs, what I need to know is if this would be expensive to fix

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Check the resisters, that could be the burnt small, also you may need to replace the ICs

Posted on Jan 11, 2009

  • coolwize Jan 21, 2009

    The IC's will have a number like stk 392-110 and the resisters should have lines on them, the resisters you need to look at are the ones that are right by the ICs here is a link to what the IC's look like
    http://www.mcmelectronics.com/content/pr...


    if you like you can take a pic of the borads and I will point you in the right area.
    furdog@usa.com is my email address


  • coolwize Feb 03, 2009

    you need to replace the IC's and check for bad resisters you can use the same type of IC's in the tv stk392-110 or you can also use stk392-150,stk394-160 any of these will work in your tv if you need and help I can talk you through it

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LF501EM5F LED HDMI flat screen tv blinks red light 4 times & no picture but back lights work


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 14, 2017 | Televison & Video

1 Answer

E500i-B1 won't come on.


Suspect a failing power supply

Jan 13, 2017 | Televison & Video

1 Answer

The light on my TV is blinking in a 1-2-2-2-1 pattern but nothing happens when I try to turn it on


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 12, 2017 | Televison & Video

1 Answer

Hitachi led tv. No picture. Sound though


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 11, 2017 | Hitachi Televison & Video

2 Answers

I have a sharp aquos tv model lc-32m400x. When i turn the power on via button at the back the green light comes on for about 10secs then turns to red and flashes about every 11/2 - 2secs. Any ideas.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 11, 2017 | Sharp Televison & Video

1 Answer

24inch Bush smart TV/DVD not working.


Could be an open internal fuse or power supply failure

Jan 09, 2017 | Bush Televison & Video

1 Answer

I have a lg tv 60 inch tv ln5600 when powering on red stand by light blinks 3 time then no light pic or sound not backlight and no image when using flashlight treid replacing power board does same


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 08, 2017 | LG Televison & Video

4 Answers

LG 26LH2000 television. Last 2 days when I turned my TV on there was only sound, and black screen.


back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
26359174-wxmxxsggneevie4j1gyznoid-1-0.jpg

Nov 16, 2016 | LG 26LH2000 26 in. HDTV LED TV

1 Answer

URC-22B doesn't work with my BEKO tv.


Check with this method. Manually turn on your tv.
Then push and hold the code saerch button until the light stays lighted release the button.
Push and release the device button you want to set TV.
Now you got to push and release the ON/OFF button until your device turn off when your device turn off stop and push and release the enter button for storage the code.
Warning: You may push and release the ON/ OFF button for almost 200 times.
Good luck.














.

Jun 12, 2009 | Televison & Video

Not finding what you are looking for?
Hitachi 53UDX10B 53" Rear Projection Television Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2292 Answers

The Knight
The Knight

Level 3 Expert

71611 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...