Need to set up hotkeys

try reinstalling the atk hotkey drivers.

http://support.asus.com/Download.aspx?SLanguage=en&m=Q301LA&p=3&s=583

chose the operating system. under utilities you will find atk hotkey drivers. download and install them.

<Fn> + <F1> = Hotkey help = Displays help on hotkeys.
<Fn> + <F2> = Acer eSettings = Launches Acer eSettings in AcerEmpowering Technology.
<Fn> + <F3> = Acer ePower Management = Launches Acer ePowerManagement in AcerEmpowering Technology.
<Fn> + <F4> = Sleep = Puts the computer in Sleepmode.
<Fn> + <F5> = Display toggle = Switches display outputbetween the display screen,external monitor (if connected)and both.
<Fn> + <F6> = Screen blank = Turns the display screenbacklight off to save power.Press any key to return.
<Fn> + <F7> = Touchpad toggle = Turns the internal touchpad onand off.
<Fn> + <F8> = Speaker toggle = Turns the speakers on and off.

At the top of your key board right below the power button, there is a row of hotkeys the far left one is the wireless button

At the top of your key board right below the power button, there is a row of hotkeys the far left one is the wireless button.
Aspire 4520 - Above keyboard right below the power button, the far left one is the wireless button

Aspire 5310/5315/5710/5710Z Series - Row of switches above keyboard deck, left most switch

At the top of your key board right below the power button, there is a row of hotkeys the far left one is the wireless button.

At the top of your key board right below the power button, there is a row of hotkeys the far left one is the wireless button.
Have you gone into your device manager and seen if the wireless network device is turned on/enabled?
Did you have software installed to use the WebCam? You need software to run the WebCam. Look in your program folder to locate webcam software.

Have you checked to see if the wireless has been disabled?
At the top of your key board right below the power button, there is a row of hotkeys the far left one is the wireless button.
Hope this helped!! Comment if you need more clarification.

You have a blue key that says FN (stands for function) on the bottom left side of your keyboard, next to control and shift. The brightness and dimming hotkey is usually on the arrow keys or up on your f row, f1-f12 and you'll see like a sun and half sun in blue, same as the function key. While holding that function key tap keys you found and it'll brighten and darken. If it doesn't, you may need hotkey software installed, a new LCD (backlight may have failed) or inverter which powers the LCD.

Found this little bomb shell after about 30mins of looking for an answer.

http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=9220

To toggle your scroll lock key:

1. Click on the Windows Start button.
   
2. Select Run.
   
3. Type 'OSK' in the dialog box.
   
   
   
   
4. Click on OK.
   
5. The Microsoft on-screen keyboard will open. Notice that the slk, or scroll lock, key (located in the top row of the on-screen keyboard as shown below) is turned on.
   
   
   
6. Click on slk (in the top row of the on-screen keyboard). This will toggle the state of the scroll lock key. Notice that the scroll lock key is no longer outlined in red. Scroll lock is now off.
   
   

NOTE: If you have installed SetPoint (Logitech’s Mouse and Keyboard software) the confirmation message Scroll Lock Off will also be displayed for about 2 seconds on your monitor.



Yipee!!!

Push the 'f'n' key while pushing the brightness up key at the same time. The brightness key is usually accross the top row of numbers F6 or F7.