Question about Emerson EWC1304 13 in. TV/VCR Combo

1 Answer

Trying to help this older lady with a emerson tv/vcr combo. She has no manual with set. Setting up to record same station everyday at same time. VCR will record but when playing back she only gets sound no picture. Even tried to play a movie and no good picture. She is on cable does tv needs to be on a certain channel to play back

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

The TV should be on channel 2, 3, or 4 to work correctly. There might be a small switch on the back of the VCR that lets you select the channel that it wil play back on.

Also, look on the remote control for the VCR and see if there is a button labeled TV/Video, and press that while something is playing. This switches back and forth between the TV signal and the VCR signal and it could solve your problem.

Posted on Jan 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We recently connected to Direct TV...I want to transfer some old western TV Shows I recorded on my Direct TV DVR Recorder to VCR Tape. I was told by the people at Direct TV that I would need to contact you...


You can try this: Connect your DirecTv to VCR with Red/White/Yellow cables. Then the VCR to your TV with the same type of cables. Make sure the VCR is set to the video input, not the tuner. Turn your TV to the correct video input. Get the program ready on the DVR as if you were going to watch it. Press record on the VCR and then play on the DVR. At the end of the program, press stop on both. You may have a problem with the video recording properly. Some stations broadcast with copyright protection.

Apr 12, 2011 | Emerson Televison & Video

1 Answer

How to program with out remote


I need to know how to set it for record. I've tried setting for a time to start and stop, but for some reason it will not record. I have cable and the cable wire is attched to the tv/vcr.

Oct 15, 2009 | Emerson EWC13D4 13 in. TV/DVD Combo

1 Answer

Need code for Emerson TV,DVD,VCR Combo


you can set up any like this
1. turn on what ever you want set up
2. press and hold set up tell light blinks or stays lit
3. push what you are trying to set up t.v. or dvd ect.
4. push power on/off tell it turns off
5. push enter when it turns off
Thank you for useing fixya please rate me

Feb 12, 2009 | RCA Universal Remote 3 Device Remote...

1 Answer

TV code for Emerson EWC 1301 TV/VCR Combo


how do use revmote to program tv vhs thank you11

Jun 15, 2008 | Emerson EWC1304 13 in. TV/VCR Combo

1 Answer

Setting VRC to timed recording.


I suggest that you record one month at a time.

May 08, 2008 | Emerson EWC27T3 27 in. TV/VCR/DVD Combo

1 Answer

VCR won't accept new recording tape


I asked earlyer but i can't find my questin that was submitted earler today i gave you my email address with no results. I want to know where the nearest tv vcr reparemand is to Spencer okla my email is davidcurle@sbcglobal.net and my phone No.is 580-782-2888 My mother is moving to Spincer Okla. and needs her vcr forward and reverse fixed,in her emerson tv/vcr combo

Apr 02, 2008 | Emerson EWC1902 19 in. TV/VCR Combo

4 Answers

Need code for Emerson TV,DVD,VCR Combo


I don't know if you guys even need this advice anymore, as it's 1-2 years late, but if your universal remote has a VCR setting, the Emerson 13" CRT TV/VCR combo I have operates under that mode.
The code I used was 002. These may also work: 278, 184, 479, 000, 121, 211, 037, 043, 061, 208
Remember, program your remote as if you were setting up a VCR (and NOT a TV). For instance, on my GE universal, I hold the "code search" button down until I get a steady light. I hit VCR, and then I entered 002. Works like a charm.

Mar 25, 2008 | RCA Universal Remote 3 Device Remote...

1 Answer

Code


www.funai-corp.com/support for the manual. manual doesn't have codes, nor does the customer support line. you need to call direct tv and ask for FUNAI CODES. that is the manufactor of this unit.

Nov 17, 2007 | Emerson EWR20V4 DVD Recorder/VCR

Not finding what you are looking for?
Emerson EWC1304 13 in. TV/VCR Combo Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73056 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

 Grubhead
Grubhead

Level 3 Expert

4935 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...