Question about One For All URC-3021 Remote Control
I have a hitachi remote control model#57s500. how do i get codes to make my soney fm/am receiver to work with it. and my zenith dvd/vhs model#xbr413. how do i program this into one remote for my hitachi. thank you.
Im a little confused but I'm going to assume you want to use the URC 3021 to control your system.
You need to enter these codes, here is the programming method.
The specific 4 digit codes for your equipment are one of these for each unit. You need to try each one and see what works. Since it seems your specific combinations of equipment dont seem to exist on the code page, im not sure if you have the right description for the Zenith DVD/VHS. Thats ok though.
Zenith 0000 1479 0479 0525 0899 0503 0591 0856 1856 0017 0463 0178 0092 0039 0033 0000 0209 1479 0479
Sony 0639 0636 1006 0533 1533 0864 1033 0639 1639 0000 1100 0810 0000 1232 0035 0032 0033 0000 1232 0636
Strange that the Amp is not listed, but one of those should work.
If not, you may need to buy another brand of remote that allows you to capture IR from your existing remotes. Look up an MX-850...real nice!!!
Here is your code page if you want to dig for 10 min!
IF this helps, please don't forget to rate it FIXiT!
Posted on Jan 11, 2009
Tips for a great answer:
Jun 25, 2015 | Sony Remote Controls
Apr 25, 2014 | Universal Remote Control Remote Control
Feb 10, 2014 | One For All Remote Controls
Please do the follow steps:
Move the mode selector on the remote to "TV" and press and hold the television power button. Press "Enter."
Enter in the manufacturer's code for your television or other electronic device. The code is typically 2 digits long. The JVC manufacturer's code is "01." Other codes include "10" for Hitachi, "02" for Magnavox, "07" for Sony, "04" for Panasonic and "08" for Toshiba. Additional codes can be found in the user's manual for the JVC universal remote. Release the television power button.
Program a direct broadcast satellite (DBS) tuner by setting the mode to "VCR/DBS" and press "DBS." Press and hold the VCR/DBS power button and press "Enter". Press the buttons for the manufacturer's code, which are typically 2 digits. RCA is "19," Pioneer is "13," EchoStar is "21," GI Jerrold is "01" and Sony is "20." Additional codes can be found in the universal remote user's manual. Release the VCR/DBS power button.
Press the "Audio" power button to use features other than the television, such as a DVD player or stereo, and select the desired source. The options are DVD, FM/AM, VCR or DBS.
Set up the speaker settings by choosing "DVD" as the source. Hold the remote where you listen to the sound from the home entertainment unit. Press and hold "Smart Setup." Press "Enter" and move the cursor up and down on the television screen using the up and down arrows to select the distance between the front speakers and where you are positioned. Press "Start" and then "Enter.
SINCERELY.GOD BLESS YOU
managua, nicaraguaa c.a.
Feb 15, 2012 | One For All URC-3021 Remote Control
Nov 04, 2010 | Hitachi HL00721 Remote Control
Jun 05, 2010 | Sony RM-V310 Remote Control
Jun 13, 2009 | Universal Remote Control Universal Remote...
Dec 01, 2008 | Yamaha Remote Controls
Jan 26, 2008 | Directv RC23 Remote Control
84 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: