Question about Hauppauge WinTV HVR-1600 - ATSC HDTV receiver / analog TV tuner / video input ad (1181)

Open Question

Can I hook up my pvr to my tv tuner on my computer Hauppauge 1250

I have a Hauppauge-WinTV-HVR-1250 tv tuner and am trying to hook up my satillite dvr to it, can this be done or do I need other equipment?

Posted by on

2 Suggested Answers

  • 1 Answer

SOURCE: WinTV-HVR-1600 Tuner card to DishNetwork receiver

Yes, but what it can connect to depends on what Dish DVR you have. The newer, HD ones only have HDMI, S-Video, and that 5-split coax as outputs for the main TV since you only get these box's if you have and HDTV.

This is because regular old coaxial is no longer good enough for them. This means you must connect the newer DVR's to the S-Video input on the Hauppauge1600 since it is the only input to the card the Dish DVR supports.

If your DVR is older and has the coax out, you can use that and connect it to the Hauppauge analog input.

Posted on Feb 28, 2009

  • 92 Answers

SOURCE: Dell? Hauppauge WinTV-HVR-1250 TV Tuner

Make sure you have the remote sensor plugged all the way into the connector on the card. Also check your taskbar for the "remote" icon which confirms you have "irblaster32.exe" installed.

Posted on Feb 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell? Hauppauge WinTV-HVR-1250 TV Tuner "IR Hardware not detected" message during setup


Make sure you have the remote sensor plugged all the way into the connector on the card. Also check your taskbar for the "remote" icon which confirms you have "irblaster32.exe" installed.

Jan 27, 2010 | Hauppauge WinTV-HVR-1250 MC - White Box...

1 Answer

I have a Hauppauge WinTV-HVR-1600 running windows XP on ATT uverse I can not get the TV Tuner card to pick up any channals I have tried the bundled SW and a thrid party software results were the same. I...


Most likely, all stations in your area have switched to Digital Transmission, and your card can no longer find any. If that is the case, then you need a new card (they are not convertable) sorry.

Aug 19, 2009 | HP Hauppauge WinTV-HVR-1600 NSTC/ATSC Tv...

1 Answer

Tv tuner


Hello,

Basically what I can see from what I have read one had dual tuner capability and one is set up for PCI Express. Both look like great cards.

http://www.hauppauge.com/site/products/data_hvr1600.html

http://www.hauppauge.com/site/products/data_hvr1800.html

Thanks
Armymason

Feb 24, 2009 | Hauppauge WinTV HVR-1600 - ATSC HDTV...

1 Answer

No Audio with WinTV-HVR-1600 when tuning on S-Video


okay after more reading I found I needed to hook up the A/V output on my camcorder to my line-in input on the capture card (WinTV-hvr-1600) and now audio is working!

Nov 19, 2008 | Hauppauge WinTV HVR-1600 - ATSC HDTV...

1 Answer

WinTV-HVR-1600 Tuner card to DishNetwork receiver


Yes, but what it can connect to depends on what Dish DVR you have. The newer, HD ones only have HDMI, S-Video, and that 5-split coax as outputs for the main TV since you only get these box's if you have and HDTV.

This is because regular old coaxial is no longer good enough for them. This means you must connect the newer DVR's to the S-Video input on the Hauppauge1600 since it is the only input to the card the Dish DVR supports.

If your DVR is older and has the coax out, you can use that and connect it to the Hauppauge analog input.

Nov 10, 2008 | Hauppauge WinTV HVR-1600 - ATSC HDTV...

1 Answer

Hauppauge WinTV HVR-1600 - ATSC HDTV receiver


I have a Hauppauge WinTV HVR-1600. I have a comcast digital box hooked up to my PC. Signal is bad and black and white media. I installed the "current" driver two weeks ago (mid October) Work great! We had to perform a PC recovery. I downloaded the "current" driver. Got weak signal and black and white only.

Oct 04, 2008 | Hauppauge WinTV HVR-1600 - ATSC HDTV...

2 Answers

TV Tuner for my HP


Hello Matt,

WISH YOU HAPPY MERRY CHIRSTMAS!!!!!!!!

I am Vikram Kumar Thumu from India- Hyderabad. I have seen your message on the issue related to the Tv Tuner card. Since, I work with HP as Technical Support I would like to suggest you on this issue.

Well, the "HP ExpressCard TV Tuner for Windows Vista
(RM436AA#ABA)" supports only for Windows Vista.... and it will not work with Windows XP.

If you are lookng for Windows XP Tv Tuner Card, I recommend you to purchase Hauppauge WinTV-PVR USB2 (EC557AA#ABA). As this one supports for Windows XP but needs Microsoft Windows XP Media Center Edition 2005 .

These are available solution for you at this moment . I hope that this should resolve the issue for you.

If you need any other information please do mail me at thumuvikram@rediffmail.com. I'll be glad to help you.

Once again WISH YOU HAPPY MERRY CHRISTMAS!!!!!!!!!!


Thanks,
Bye...

Dec 26, 2007 | HP Expresscard TV Tuner For Windows Vista...

Not finding what you are looking for?

Open Questions:

See all Hauppauge WinTV HVR-1600 - ATSC HDTV receiver / Questions

Hauppauge WinTV HVR-1600 - ATSC HDTV receiver / analog TV tuner / video input ad (1181) Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hauppauge Televison & Video Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Hauppauge Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...