Question about Samsung LN-R409D 40 in. LCD Television

1 Answer

I updated my lcd samsung firm ware and the picture went crazy .

I updated my lcd samsung firmware and afterward the color of the tv went crazy. how do i put back the original firmware or get the original firmware back on to correct the problem.

Posted by on

  • 9 more comments 
  • miken6570 Jan 09, 2009

    where do you go to the service menu and how do you adjust the option bytes.

  • miken6570 Jan 10, 2009

    nothing happen, it just turn on like u watch tv. no option menu at all.

  • miken6570 Jan 10, 2009

    nothing happen, it just turn on like u watch tv. no option menu at all.

  • miken6570 Jan 10, 2009

    i did n it did get anthing but turn the tv on

  • miken6570 Jan 10, 2009

    ok , the menu came on, what do i do next, i needed to turn off the stb box to see it.

  • miken6570 Jan 10, 2009

    ok, than what to do

  • miken6570 Jan 10, 2009

    what to do next, tech 1819, i thank you for all of your help!!, please help me.

  • miken6570 Jan 10, 2009

    i tried, but didn't work

  • miken6570 Jan 10, 2009

    i tried, but didn't work

  • miken6570 Jan 10, 2009

    MODEL # LNT4661FX/XAA

    SERIAL # AHBB3CPPC05484Z

    VERSION # SX07



    THANKS AGAIN TECH 1819 FOR ALL YOUR HELP!

  • miken6570 Jan 10, 2009

    thanks , my email is miken6570@aol.com, if you needed to find me .

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 108 Answers

You need to go into the service menu and adjjust the option bytes. When you upgraged you changed them. The other solution would be to replace the main pcb

Posted on Jan 08, 2009

  • 4 more comments 
  • Chuck Jan 09, 2009

    you can really mess things up so be careful.. with the set in standby (off) press mute 182 power. look around the menu for option bytes write down the numbers. keep me posted on this. there are other tricks in the menu to try.

  • Chuck Jan 10, 2009

    it is mute, 182 power with the tv off using the samsumg remote.

  • Chuck Jan 10, 2009

    look around the menu for the word "bytes:

  • Chuck Jan 10, 2009

    write down the option number then select another then check the picture after you make the change

  • Chuck Jan 10, 2009

    send me your complete model number, serial number and version number

  • Chuck Jan 10, 2009

    ok, I will research this and get back to you.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

TOSHIBA MODEL 32RV530U WILL NOT TURN ON YELLOW LIGHT IN FRONT BLINKS 3 TIMES


This could very well be a problem with the power supply not allowing the TVs to start up but can also be caused by a problem with the TVs firmware. I would suggest downloading the firmware and following the steps from the following link. The download and steps are in the firmware tab after clicking the link. Be sure that even if you have no picture while applying the firmware update that you under no circumstances remove power from tv for at least 15mins. This is to ensure the firmware completely loads. If you remove power while it's still updating the board may be corrupted. http://support.toshiba.ca/support/ceg/center/en/index.asp?p=32RV530U

Jan 13, 2017 | Toshiba REGZA 32RV530U LCD TV

1 Answer

Hi I had a videoconlcd TV some mistakes the TV color went plasma how to solve the colorproblem tell me menu setting


It is so intersting to note. Color TV turned to a Plasma TV?
Hai. What I'm seeing!! Strange indeed!!!!!!!

Jan 12, 2017 | Televison & Video

1 Answer

Samsung lcd LE32R74BDX/XEU black parts of picture are pixelated and show different pictures. Usually green & blue


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Jan 12, 2017 | Samsung Televison & Video

1 Answer

My 55" led samsung tv has 2 horizonal lines on it and the left side of the tv doesn't have much color and it has trails. Is there any fix for this?


The TCON Board or the LCD panel is faulty. Can confirm by replacing the TCON board.

If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Jan 11, 2017 | Samsung Televison & Video

1 Answer

Lg model 39ln5300 no picture has sound


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Jan 10, 2017 | LG 39LN5300 39" LED TV 1920x1080, 60 Hz,...

1 Answer

Samsung LED model un50eh6000fxza just lost video and audio. Screen went black no audio.


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Jan 09, 2017 | Samsung Televison & Video

2 Answers

I have a Sony LCD Digital Color TV Model KDL-40S5100


try this --as you are wasting time and will eventually waste money---take it to a repair shop for a proper diagnosis and quote

Jan 08, 2017 | Sony Bravia KDL-40S51009 40 in. TV

1 Answer

Samsung DLP HLS4266W


Check the fittings of the color wheel. Refer this site for more details.
http://electronicshelponline.blogspot.com/

May 17, 2013 | Televison & Video

Not finding what you are looking for?
Samsung LN-R409D 40 in. LCD Television Logo

Related Topics:

946 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69938 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...