Question about Fax Machines

1 Answer

I Have a HP2210 l in one that continually asks me to clear the print jam and press OK i d this and the printer carriages gets stuck at either end of the carriage and then the printer asks to clear the jam The printer wont work at all even though the carriage slide appears clean and unblocked.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

When I see this happen in the field or at the shop the printer is toast and not worth repair. These machines only last about 4 years and then develop a hardware or logic issue. Sorry, but that is my experience.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Though i have no paper jam, it keeps on prompting Clear paper jam then touch ok. Also notice the carriage not moving from right to left ,its making a weird noise.seem paper feeder gear stuck but clear


Hi vidya kowlessur,

I would be happy to help you with your Officejet 7500A printer. I understand you are seeing a message prompting you to clear a paper jam, and the carriage is likely jammed. Please use the following 2 documents to troubleshoot the issue;

HP Officejet 7500A E910a and E910c Wide Format All in One Printers Out of...

Carriage Jam or 0X610000F6 Message Displays for HP Officejet 7500A E910a...

I hope this helps, but if the issue persists, what you can do, is use the following link to create yourself a case number, then call and it may help speed up the call process:


Step 1. Open link: h22207 www2 hp com
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number

Case number and phone number appear.

Best of luck.
I work on behalf of HP.



:)

Jul 09, 2015 | HP Officejet 7500A Wide Format...

1 Answer

The Power light and the Resume light blink.


The Power light and the Resume light blink.

Print media is jammed in the
device.
Remove all media from the output
tray. Locate and clear the jam. For
more information, see Clear a jam
in the device.
The device carriage has stalled.
• Open the top cover and
remove any obstructions
(such as jammed media).
• Press (Resume button) to
continue printing.
• If the error persists, turn the
device off, and then on again

Feb 10, 2014 | HP Officejet 7000 Wide Format Printer

2 Answers

How to reset error 5100


Jams in the Document Tray

When a document jams or misfeeds in the Document Tray, <OPEN COVER> and <SEE FIG. 1> <!!CHECK!! 5100> are displayed on the LCD.

Note
You do not need to unplug the fax when clearing document jams.

* When <OPEN COVER> and <SEE FIG. 1> are displayed alternatively

1. Press [Stop].

Important
Do not pull out the jammed paper manually at this point.

2. Hold down [Start/Copy] for a few seconds.

* The document will be fed out automatically.

* If the document is not fed out, gently pull the document out of the fax.

* When <!!CHECK!! 5100> is displayed

1. Check if any paper is jammed.
If jammed, make sure to take out all the jammed paper.

2. After taking out jammed paper, turn the fax off, then turn it back on with [ON/OFF].
Jams in the Multi-Purpose Tray

If paper jams in the Multi-Purpose Tray, <CLEAR PAPER JAM> is displayed on the LCD.

1. Gently pull any jammed paper out of the fax as shown, then press [Stop].

* Pull it gently in either direction.

* If you cannot pull the paper out, continue with the steps below.
80000294en_06kf10016_en_01.gif
2. Open the Printer Cover.

3. Gently remove the jammed paper inside the fax.
80000294en_06kf10016_en_02.gif
4. Press [Stop].
The fax returns to standby mode.

Sep 24, 2013 | Canon FAX-JX200

2 Answers

Hp 500 ploter adjustment karne pra 22:10 errer cord ata he


System error 21:10 is generated when the printer has detected a fault in the Service Station. Causes of this error can include the Service Station or Carriage. Follow the steps listed below to accurately troubleshoot the issue, and replace the appropriate parts.
Part Description Designjet 500 Models - C7769B, C7770B, C7769C, C7770C Designjet 800 Models - C7779B, C7780B, C7779C, C7780C Service Station Assembly (Required) C7769-60374 C7769-60374
    NOTE:If Removal and Installation instructions are needed for reference during any repairs performed, refer to the HP Designjet 500 and 800 Series Service Manual available on the Computer Care Web site for review or download. Troubleshooting steps If any of the troubleshooting steps listed below solve the problem, attempt to verify printer functionality (instructions listed below). If functionality is verified, no additional parts should be replaced.
      NOTE: The printer's current firmware revision must be A.02.04 or higher for a new Service Station to work properly. If firmware is lower than A.02.04, download the newest available firmware before continuing with the remainder of this document.
      1. Turn the printer off, then on to verify error. If no error attempt to verify functionality.
      2. If the error appears or problems persist, continue with the remaining steps.
      3. Follow the steps directly below to unlock the Carriage from the Service Station:
        1. Highlight the Set-Up menu and press the ENTER button.
        2. Press the UP arrow and ENTER buttons simultaneously and press the ENTER button.
        3. Highlight Service Utilities and press the ENTER button.
        4. Highlight Unlock Carriage and press the ENTER button.
        5. Unplug the power cord from the printer.
      4. Manually move the Carriage assembly out from the Service Station area and check for obstructions (remove as needed).
        NOTE: If you are unable to release the Carriage by the previous process, remove the right end-cover and locate the main Service station gear (as pictured below in Figure 1) and rotate it counter clockwise approximately four revolutions. The Carriage assembly should now be free from the Service station. Figure 1: Service Station Gear
        bpp90134-1.gif
        1. If an obstruction is found and removed, plug the power cord in, turn the printer On and attempt to verify functionality.
        2. If no obstruction was found or the problem persists, continue with the remaining steps.
        3. Disconnect the power cord from the printer.
        4. Remove the right end-cover from the printer.
        5. Open the top cover and manually move the Carriage to the left so that it is not over the Service Station (refer to Step 3 for instructions).
        6. The Service Station flag should be at about a 45-degree angle as pictured below in Figure 2.
        Figure 2: Service Station flag correctly positioned
        bpp90134-2.gif
        1. If the flag is correctly positioned continue with Step 16.
        2. If the flag is not at a 45-degree angle, press in gently on the bottom of the gray and rotate the bottom of the flag to the right (toward the back of the printer) until the top of the flag clips into the tab on the Service Station. The flag should stay at about a 45-degree angle.
        3. Plug in the power cord and turn the printer on.
        4. If no error appears, attempt to verify functionality.
        5. If the error reappears continue with the remaining steps.
        6. Turn the printer off and disconnect the power cord.
        7. Replace the Service Station assembly (refer to pg. 8-52 of the HP Designjet 500 and 800 Series Service Manual).
          NOTE: The printer firmware must be upgraded to A.02.04 or higher for the new Service Station to work. The new Service Station does not have an Aerosol fan and older firmware will check for the Aerosol fan, thus causing another system error.
          1. Following replacement, turn the printer on and verify functionality as instructed below.
          Verifying printer functionality
          1. Turn the printer on.
          2. Allow initialization to complete.
          3. Load media into the printer.
          4. From the main front-panel menu, select the Ink menu and press ENTER.
          5. Select Troubleshooting and press ENTER.
          6. Follow the instructions on the Front panel.
          7. Following a successful troubleshooting print, functionality is verifie

Sep 16, 2013 | HP Hewlett Packard Designjet 500 42" Wide...

2 Answers

Brother MFC-3220C. I need to change the printer cartridges but I cannot get the cartridges in the middle of the printer in order to access them--they seem stuck on the left. Help?


Turn off the power. Turn it back on again and listen to the sound of the carriage moving. When you hear it then pull the mains lead out the back. the carriage will now be unlocked and there should be no resistance to you pushing it into the centre of the machine. If it is jammed at the left end then its possible that one of the cartridge locking arms has popped up and is fouling the case. A bit of jiggery poo with a screwdriver should push it down while you try and pull the carriage to the centre.

Good luck.

Jul 20, 2011 | Brother MFC-3220C Plain Paper Inkjet Fax

1 Answer

My hp 1040 constantly jams have tried to clean it and makes little or no difference any suggestions. It will print half of a page then it will say that it is jamed.


>first try to power reset the fax machine, then see if the error still persist..to to a power reset unplug power cord from the back and wall outlet then wait 30 sec and then plug it back
>if the error still persist open the the rear access door and check the if there is any jammed paper in there.using a lint free cloth lightly moistened with distilled water wipe the rollers clean. also check if there is a paper jam from the inside of the printer by opening the cartridge access door
>If there is no paper jam and it gives you a paper jam error message then try to check if the carriage can move freely, first while the printer is on open the cartridge access door of printer cover, the carriage will move to the center which will give you access on it, now unplug power cord from the back of printer with out pressing the power button off. try to check if there is any debris or paper that is blocking the carriage path. with your fingers try also to move the carriage from left to right and see if it can move freely. if the carriage can not move then you have a carriage jam which causes also the paper to jam, if it can move freely then try printing and see if it will jam again.
>also try to remove and reseat the ink cartridge.
>if this will not resolve the issue try a hardware reset, while the fax is on unplug the power cord from the back with out turning it off. press and hold # and 6 at the same time.while holding the buttons plug back the power cord and wait till you see semi-full or nvn reset when it turns back on then release the buttons. if the machine will not automatically power back on press the power button. it should ask for you to select language, region etc a proof that you have successfully done the reset..try printing...
>if it jams again contact hp and ask for replacement if it is still in warranty if its not ask for an upgrade


Sep 21, 2009 | HP 1040 Plain Paper Inkjet Fax

1 Answer

Hi, My SF 360 keeps flashing up " clear cartridge channel/paper jam and press start. Every time this is done/sorted, the cartridge goes onto "printing" then stops in the middle of the carriage - the the...


In your fax machine is a thin shaft. Clean it with a dry cloth to take away the dirt to prevent from getting stuck or if that does not work,try another cartrige. If that also not work,then there is somthing wrong with the print head.

Aug 25, 2009 | Samsung Fax Machines

1 Answer

My HP photosmart c7200 printer is aying there is a carriage jam??? i caoont see any paper stuck in it and am wondering what to do! There was a blockage yesterday and i cleared this but cannot see any...


Unplug the machine and try to move the ink carrier, if you can't, it's probably uneconical to get it repaired, unless it is under warranty.

Dec 16, 2008 | Fax Machines

1 Answer

My printer says carriage jam I am unable to locate any jam


the carriage is the part that holds the ink. It is probably stuck in one place, either the top of one of the inks is open or something is in the way.

Sep 11, 2008 | HP Fax Machines

2 Answers

Help!!!


Carriage assembly is broken. Uneconomical to repair.

Jan 17, 2008 | Sharp UX B700 Plain Paper Inkjet Fax

Not finding what you are looking for?
Fax Machines Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fax Machines Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

polytek

Level 3 Expert

452 Answers

Are you a Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...