Question about Canon PowerShot A95 Digital Camera

2 Answers

A95 lcd not working

My A 95 was working fine. but last time when i used suddenly lcd stopped working . if i close the lcd screen then camara is working fine but when i open the lcd its not ever getting ON. Please help me out with good solution. thanks

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

PowerShot A95 is exhibiting signs of a CCD failure. It has recently come to our attention that the vendor-supplied CCD image sensor used in this Canon digital camera may cause the following malfunction: When the product is used in recording or playback mode, the LCD screen and/or electronic viewfinder may exhibit either a distorted image or no image at all. While reports of this malfunction have been rare in the United States, we have determined that it may occur if the product is exposed to hot and humid environments. " I send this camara to Canon and they repaired this with NO Charge." If anybody got this paroblem please send your camara to canon service center. If u need further information pelase send me a mail on ashok_malaviya@hotmail.com.

Posted on Jul 08, 2007

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers

This is a switch problem how old is it - will it go back under warranty? Get onto the Canon Technical Support

Posted on May 31, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot see what im shooting and on lcd screen,no picture jus black. It shows numbers timer everything else except picture. In play mode everything works fine.


I have 2 xelim camaras. One of which has a piece of some type of cover partially obstructing the view. This camara still displays the time and menus and older pictures. If I take pix now the picture is obscured. The other camara has no picture on the display but when I take a picture it turns out just fine. That camara will need disassembled and a connector hooked back up

Most screens on digital camaras are for aiming the camara and output (displaying the picture) therefore any problems with the screen do not translate to a picture.

Oct 23, 2009 | Canon ZR85 Mini DV Digital Camcorder

1 Answer

A95 Canon LCD moniter


Canon will resolve this problem free of cost as per announced Canon CCD Advisory.
Your Canon A95 has problem with CCD Imager and this part will be replaced by Canon Support free of cost. Click above said web link to get details.
Have a nice day.

Oct 26, 2008 | Canon PowerShot A95 Digital Camera

4 Answers

Blurred pink LCD picture


This is a manufacturing defect. Send the camera to canon repairing shop.The will do it free of cost.
I had the same problem,

Jul 14, 2008 | Canon PowerShot A95 Digital Camera

1 Answer

Help


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Mar 28, 2008 | Canon PowerShot S1 IS Digital Camera

1 Answer

PowerShot A95 does not power on


Here are some simple things to try first for a camera that won't power on. They won't work for every case, but they're worth a try:
http://camerarepair.blogspot.com/2007/11/simple-fix-for-dead-cameras-that-wont.html

Feb 05, 2008 | Canon PowerShot A95 Digital Camera

2 Answers

Canon A95 "Change Batteries" problem!


I have this problem as well. I thought it was a problem with my NiMH batteries. So, I bought a volt meter to make sure the batteries worked. I have 8 AA NiMH batteries. I charged them all up and tested them with the volt meter. They were all good to go. However, no matter what I put in the camera one of two things happens:
1. I get the "change batteries" message.
2. I don't get the message, but the next time I check the camera (a few days later), one of them is totally drained.
Something is very wrong and I plan on contacting Canon.

Nov 30, 2007 | Canon PowerShot A520 Digital Camera

1 Answer

Canon a95


This definitely sounds like it's a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your cameras warranty status. Please check the following two links for more info:
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110

Oct 09, 2007 | Canon PowerShot A95 Digital Camera

1 Answer

Canon A95 operability issue


Defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. You need professional service to fix it.

Sep 30, 2007 | Canon PowerShot A95 Digital Camera

Not finding what you are looking for?
Canon PowerShot A95 Digital Camera Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

TC CAMERA REPAIR.Com...

Level 2 Expert

176 Answers

old marine
old marine

Level 3 Expert

2179 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...