I have a laptop Everex...my modem is working just fine and the lap top connects to the modem but the internet explore won't connect.

The bars on your laptop or iPhone means that you are connected to the router! Not necessarily to internet. Your internet depends on ISP Internet service provider and modem which connected to your router. To check if you have active internet connection connect your laptop directly to modem provided by your ISP with ethernet cable and try to open a internet browser IE or Safari or Chrome or Firefox and open a webpage! If you are able to connect internet by this mean you have internet connection active. Now disconnect your lap top from modem and connect modem to your Linksys router using WAN port of LINKSYS! Its good to power off and power on (power cycle) once on modem and router to make it work!
good luck!

Connecting to the internet requires you to subscribe to an internet provider. If you already have a subscription, just connect your lap top to the modem and click Internet Explorer to connect to the internet.

Hi Friend,
When you are tring to connect in wireless it will ask for password,please follow the below steps and get the security key of your Router

Step 1:Connect the Modem to Router (in the Port named Modem) and take another ethernet cable abd connect one end to the Router(in the port named Wired) and other end to any one of your computer

Step 2:Open an internet explorer and type 192.168.2.1 and click on Enter button in the keyboard

Step 3:Now you will be able to see the belkin router setup page

Step 4:On your left hand side click on Security,it will prompt for a login password,leave it blank and click on Submit.

Step 5: In this page you will be able to see the security key or PassPharse,please make a note of it and type the same when its asking for security key

Regards,
Aysaam

1. connect yellow cable from Actiontec to the internet port (labeled internet)
2. Power cycle the engenius router.
3. login to the Engenius and verify the status. You should an IP Address from the ISP (Internet Service Provider). If not then you will have to verify the IP address from the router.
4.Make sure the laptop the see the wireless connection.
5.Verify the "ESSID" if your router and connect.

your desktop is tied to the modem so when you connect your lap top to it turn both the modem and the laptop off the then the turn back on and try, after the laptop loads in to windows try and connect and i should tie to the laptop then
hope this helps

Your dial up modem needs to be ab external modem.
You can not use an internal modem from another machine unless you create a network and share your connection.
If you have an external modem then connect the modem to the available port on your laptop and let plug and play take over. If you do not have a port on your laptop and you modem has a serial port you will need a usb to serial adapter which you can get at Radio Shack.

Try the link . . . www.laptop-problem-solution.com

For find your best solution.

2

yes. Here is Linksys' page on how to:

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3687

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

You can get the entire driver as well as the user manual from this link
http://www.notebook-driver.com/everex/everex-stepnote-nc1500-notebook-windows-xp-drivers/

the internet cable should be connected to the "Internet" or "WAN" port on the router. Your PC should be connected to one of the regular ports on the back of the router and your laptop can be connected just like the pc, or it can connect wirelessly.

Then you should be able to see the internet from your laptop.