- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Speakers, connecting cables and Sound Card are working fine by connecting to another computer.
If the connection ok increase your volume andopen the cable from the pc. Now you will touch the stereo jack, can you can listen a sound when touch thejack. If you will not get any sound, think there is the problem in youramplifier or audio system has not any voltage. To confirm the voltage check bymulti miter or can go any local Technician .If the voltage is ok, think yoursound system defected and should go to Technician. Hope this helps.
You may want to purchase a good audio card for you Z-2300 to unleash it's magnificent driver features. Since its a 2.1 channel speaker, there are a lot of cheap but quality audio cards that is available for it.
start with the right speaker, that is you control for now. plug in the power supply one end to the wall the other to the right speaker, connect the left and right speakers, connect the sub woofer to the right speaker, (most of the plug and sockets are color coded, or at least different sockets sizes so they will only fit properly with the correct connector) now you should have one wire left coming out of the right speaker-that gets connected into the GREEN socket of you computer. Now you should get sound...good it works. From here we go to START->SETTINGS->CONTROL PANEL->RIGHT CLICK ON SOUND AND AUDIO DEVICES->VOLUME TAB->ADVANCE (TO THE RIGHT OF SPEAKER VOLUME->SPEAKER SETUP->FOR THE DROP DOWN ARROW SELECT DESKTOP STEREO SPEAKER->APPLY->OK And that my friend is properly done. enjoy,,, please leave a rating, thank you
I'm just taking a stab in the dark here but bare with me on this, I got a lot of info stored in this old head so it takes a while.
If you look at the jack for the microphone, Does it have 2 sleaves and a pin or just 1 sleave and a pin. If it has 2 then you will need an adaptor (Normaly Stereo jack to XLR). If it has 1 sleave then your going to need a preamp.