Question about Vtech Tote n Go Laptop Plus

1 Answer

Volume not working

I'm not sure what happened. Yesterday the volume worked and today it doesnt. I thought maybe the batteries were bad so we replaced those. It still doesnt work. You can see the picture you just cant hear anything.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Hi! Did anyone accidentally dropped the laptop? The speakers of these toy laptops are very flimsy in its construction. If you can open up the toy, you can fix the speakers (actually there is only one speaker). Take out the phillips screws under the unit and open it up. You may see that the speaker is not in it's place or it broke into two. Don't worry though, you can still put them back together (carefully). You may apply a small amount of glue on the speaker's edge to prevent the speaker from breaking apart again in case the toy accidentally falls (again). Hope I helped solved your problem. Good day.

Posted on Jan 09, 2009

  • 1 more comment 
  • clpjlh03 Dec 06, 2010

    thank u Kuyaalvin that slved my problem with the speaker......clpjlh03

  • Alvin Chua
    Alvin Chua Dec 07, 2010

    You're welcome. I'm glad to be of help!

  • grammanat51 Apr 07, 2011

    That didn't help mine. The wire had come off and had to be soldered back on.


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Setting volume during recording

Take it back to the store. They can help. Or, since you asked me, I'll answer. Try batteries inside of it. Tell me if I helped or not!

Dec 30, 2013 | Dolls, Playsets & Toy Figures

1 Answer

Hi guys my new udi u810 gyro iphone controlled helicopter doesnt power on even after i charged it for a long time i noticed that the usb charger is working but it doesnt show that the helis battery is...

The batteries are just bad. It happens often. If you can find similar rechargeable batteries then try to replace. It might require desoldering and resoldering them in but if you can't return this then that's about your only option (if you are going to fix this yourself).

Feb 07, 2013 | Dolls, Playsets & Toy Figures

2 Answers

Walkie talkies were working yesterday (gift from Christmas) and today the red power light is on indicating both working, but we can only get sound out of one of them.....any suggestions? brand new...

These walkie talkies are pretty simple to use. Turn on and turn the volume up and talk. So if you turn it on it is possible for there to be enough juice in the batteries to make the LED function but not enough to modulate (or talk) to the other walkie talkie. Have you tried to replacing the batteries with new ones yet? Sometimes recharge ables go bad and they are no good when you install them into your item. So make sure the batteries you installed are "new." And replace in both units. Should this not work, given the nature of the item and the age of those who will more than likely be using them, they break and soldier joints come loose. The back has a screw that is a specialty tool to remove. Outside of removing that and taking a look there is not much that can be done. Make sure to put at least 5 feet between the two radios to allow for good reception.
Regards, Tony

Apr 17, 2011 | Digital Blue LEGO Walkie Talkies

1 Answer

Although my bt baby monitor 150 units are fully charged and within range they still will not link up. They have worked perfectly until yesterday. I have tried doing a factory reset & taking the...

I had the same problem, have just spoken to BT (helpline is 0808 1006554) and they advised this is how you re-link the base and parent unit.
1. Switch both units off
2. On the base unit press volume up (+) while turning on the unit. The word "registration" should appear on the display.
3. Then on the parent unit, press the power on and then as soon as all the lights come on, take your finger off the power button and press the volume up (^). The word "registration" should appear on the display and then the units should link.
It's a bit of a fiddle getting the parent unit to re-register and they both need to say "registration" at the same time, but we got it after several attempts, and now they are working fine.

Apr 16, 2011 | Dolls, Playsets & Toy Figures

1 Answer

Speaking volume is too low.

Is this a brand new toy? Usually the volume goes down as the battery dies, so you might try replacing the battery on it. If a fresh battery doesn't solve the problem, I'd either take it back to the store (if it's new) or if you have skills with a soldering gun, pull the board from the toy and mod the volume (instructions on how to do this are on Hope this helps.

Mar 14, 2011 | Dolls, Playsets & Toy Figures

1 Answer

New sleep sheep will not work even when batteries are changed. Gift received a few months ago. How can we get the sound box to work?

Do you have both the volume dial turned on and a sound selected? In order for the Sleep Sheep to work, you have to turn the volume dial on (you'll hear it click) and then select one of the four sounds by pressing one of the buttons. If you just turn the volume on by itself, no sound will come out until you pick one.

Dec 19, 2010 | Cloud B Sleep Sheep Plush Sound Machine

1 Answer

Hi!! I have a Sleep Sheep for my baby daughter - we've only had it for one week. It worked initally, and then stopped working all of a sudden. I thought it must have been the batteries, so I changed them...

Hi, luckily with the Sleep Sheep, the internal circuitry is easy to get to by removing some screws. Does the sheep turn on at all? Does it start and then stop? Do any of the sounds work, at any volume levels?

Aug 15, 2010 | Cloud B Sleep Sheep Plush Sound Machine

1 Answer

My lemax house had it's volume/( black box) elictrical smashed . how To I repair it. Can you help me?

Glue doesnt do much. if your lemax house over-heats the glue previously applied will simply tear off. I have recently smashed my volume box as well and im afraid i have no advice =(. I had to replace with a brand new one because the repair were even more expensive than a new house. im sorry.

Oct 02, 2009 | Lemax Dolls, Playsets & Toy Figures

1 Answer

Blue Hat Company Mp3's volume dosen't work

You may try resoldering all of the connections on the volume knob circuit board. If one of the potentiometer (volume control) connections has broken free of the board, it may not be noticeable, but may hold the component off the board just enough to cause the problem you're having. If that doesn't help, the problem is most likely in the potentiometer itself, and you won't be able to replace it easily.

(If you are going to replace the whole player, I've heard that the sweetpea 3 is a better device. My Blue Hat is still working after making some repairs, so I haven't tried the Sweetpea yet...)

Jan 09, 2009 | Sharper Image Blue Hat Toy Company Kids...

Not finding what you are looking for?
Vtech Tote n Go Laptop Plus Logo

Related Topics:

443 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vtech Dolls, Playsets & Toy Figures Experts

Rick Arnold

Level 2 Expert

63 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

10718 Answers


Level 3 Expert

6034 Answers

Are you a Vtech Doll, Playset and Toy Figure Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides