Question about Creative Labs ZEN V Plus MP3 Player

1 Answer

My ZenV wont do anything.

It has worked fine for months, but now...i was fast forwarding and it froze and now it wont turn on and i pushed the restart button and nothing happend its been like this for 15 minutes so far

Posted by on

  • larry59 Dec 04, 2007

    1st tried to cut on

    2nd used restart button

  • Anonymous Dec 08, 2008

    My Creative Zen Vision M has the same problem. It was working with no problems. I don't recall the battery being dead either.

    Today, I brought it in to work and it won't start up. The light on the top blinks on and then goes off when I try to start it.

    I have it on charge and it is getting no juice. While it is plugged in, the blue light on top just blinks on and off. It never starts.

    I tried the reset button twice. I can not use the reset button while it is on charge due to the proximity of the button to the place where you plug in the adaptor.

    It was a bit chilly out this morning, and it was in the car overnight. Could this be related to the issue?


    Barry Nadler



1 Answer

Try putting it on the charger

Posted on Dec 12, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My phone is froze what do i do

Try removing battery and put it back in and restart. If its an Iphone you will have to remove back cover and disconnect battery connector on the main board

Oct 22, 2017 | Audio Players & Recorders

1 Answer

Ipad wont turn on

Hold the lock button in until it restarts and when it does restart it again to make sure it's fine . If the problem persists and it flatly won't turn on you should probably get it checked out .

Dec 27, 2013 | Apple iPad 2

1 Answer

Tablet froze in the middle of restarting and the screen wont respond

Wait till the device runs out of battery (or pull out the battery) then try to reboot.

Nov 30, 2013 | Samsung Galaxy Tab 2 7.0

1 Answer

Cdr drawer won't open on Philips cdr 800.

looks like the rotor is jam or broken,try to unscrew it and open the top cover so you can see the rotor and then plug it in to the power source ,then always press the open/close button and check the rotor if its jam or broken and see what happen.

Jun 06, 2010 | Philips CDR800 4-Disc CD Recorder

1 Answer

Remote wont work, system has locked up, no fast forward, no mute no play, nothing. froze!

I hope you backed up all your song files to disc. The 2488 has a built in hard drive just like any computer. If it has actually froze up, you will loose all song files when the technician repairs your hard drive.
I hope you tried pressing the "no/exit" key before simply unplugging the unit. I've seen and heard alot of people who have lost patience and just unplug the 2488 from the power source.
Good luck!

Aug 11, 2009 | Tascam 2488 Portastudio Multitrack...

4 Answers

How do you unlock the Samsung DVD - P191 from all regions?

The following solution was posted on Whirpool.

Turn on the unit with no disc in the unit. The No Disc message should be visible
Press the following keys in this sequence
Repeat (not the A-B Repeat, just the plain Repeat)
Fast rewind button (just below the Disc Menu button)
Play button
Down button
Down button
Right Button

The number 9 should now appear towards the left of the screen.

Open then close the disc draw

Turn off the unit and then on again. You should now be able to play DVDs from any region

Apr 18, 2009 | Televison & Video

1 Answer

Disc Error - Playback Feature not Available on this Disc

I think I figured it least mine is working now anyways and it hasn't worked in 2 years! I got the remote out, pushed setup in dvd mode and initialize and now it works

Sep 15, 2008 | Emerson EWD2004

1 Answer


It is broken. That's it.

Apr 06, 2008 | Insignia NS-8PDVD

1 Answer

Ipod nano

switch the hold button on and off, then hold horizontally, and push the menu button and center button at the same time. hold them down untill the ipod restarts and the apple logo apears. If that doesen't work, plug into the newest itunes program, and push restore.

Feb 26, 2007 | Apple iPod nano

Not finding what you are looking for?
Creative Labs ZEN V Plus MP3 Player Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mohamed Ismail
Mohamed Ismail

Level 3 Expert

462 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides